Just an FYI There is no Micro Center near info age Unless you consider Patterson, New Jersey “nearby “ Sent from: My extremely complicated, hand held electronic device.
On Nov 13, 2025, at 11:04 AM, Matthew Martin via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote:
I won’t be at the workshop, unfortunately, but if you’re in a jam and there’s a Micro Center nearby, they stock these and they’re cheap:
https://www.microcenter.com/product/663329/eclipse-enterprise-trimming-tool-...
-Matthew
Sent from my iPhone
On Nov 13, 2025, at 10:56 AM, Eric Fox via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote:
Good evening,
I plan to make some adjustments to my Commodore 1702 monitor while it is actively on in an effort to calibrate the image geometry/stretch/XY. I have a set of metal screwdrivers with plastic handles on hand, however I question the safety of using these when making adjustments while the monitor is plugged in. Would anyone happen to have any ceramic/plastic screwdrivers (flat head/Philips) with precision tips to adjust the pots inside they could bring along for the workshop this Saturday? Support in this project would be greatly appreciated if some tools could be offered then by any participants. If no one seems to have any, I could either wing it with what I have or overnight order something online for Saturday.
Thanks!
Eric
On Wed, Nov 12, 2025 at 3:51 PM Eric Fox <ericfox950@gmail.com> wrote:
Good afternoon,
I plan on attending the workshop in Wall this coming Saturday to adjust the geometry on my Commodore 1702. My plan is to use the monitor to run modern 8/16 bit games on the CRT for a classic feel. In plugging it into my PC (HDMI > S-Video > Luma/Chroma), I've noticed that the image on the screen extends beyond the frame, therefore losing about 10% of the image off-screen. Upon watching some videos on how to work on the monitor to make adjustments, I see that I would benefit from having a device that could load the 240p Test Suite software to confirm the physical calibrations I make. Unfortunately, I do not happen to have a device that can run this software and push 240p. This might be a big ask; does anyone happen to have a device that I could plug the monitor into that can run this software? Any support in this matter would be greatly appreciated!
Thanks,
Eric Fox
On Tue, Nov 11, 2025 at 5:49 AM Jeff Salzman via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
This month's MARCH Workshop will be held in a different room on-site at InfoAge. The room is in building 9010D.
*This is a temporary change of location. The location for the November 2025 Workshop supercedes the location listed on the MARCH Workshop web page at Repair Workshops @ InfoAge – Vintage Computer Federation <https://vcfed.org/repair-workshops-at-infoage/>*
For those who have been to VCF-East before, the 9010D room is the same where talks and conferences were generally held. When driving into campus through the main gate and heading toward the T-intersection of the road, a small set of cement stairs is located right in front of you, leading to the main entrance of 9010D. Make a right at the T-intersection and park anywhere along the road edge in that area. Just do not park on the grass.
We still need to know who plans to come to the Workshop, so please add your name to the list on the spreadsheet linked here:
https://docs.google.com/spreadsheets/d/1wZfxlcyORhpSiPJso0Qc-MMWypN_m6muR7Oq...
As for the Hack-a-Thon that's scheduled for Saturday at the Workshop, please use the same form linked above to sign up. A separate Hack-a-Thon sheet was added for that purpose. Please select it from the tabs at the bottom. The Hack-a-Thon will be postponed until another Workshop event in 2026 if there aren't at least two people (or teams) that sign up for it by this Saturday. Complete details about the Hack-a-Thon are here:
https://vcfed.org/2025/09/15/march-hack-a-thon-free-pile-fabrication/
Looking forward to seeing everybody there this weekend!
Jeff Salzman MARCH Steering Committee Workshop Manager