Basically yrs, just load the binary. That's pretty ambitious for one day. I really just want to get started, measure voltages, etc. I was given a focal tape with a loader from,.believe it ornot a former owner of the pdp 8 I have in the museum. On Thu, Jul 6, 2023, 10:53 PM David Gesswein via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
If you do run into the overrun problem loading a FOCAL source file just take the reader out of run every 1/2 time it took to overrun until PDP-8 stops sending and it will be fine.
A lot of the FOCAL program around are too large for 4k. I have a Lunar Landar that works in 4k if you haven't already found something to load under FOCAL. Assuming this was part of your plan or were you just loading FOCAL binary?
On Thu, Jul 06, 2023 at 10:33:37PM -0400, Bill Degnan via vcf-midatlantic wrote:
Dave Inhave an actual tape with loader prepared. I get what're saying about the baud. I don't have a run relay. I guess we'll see
On Thu, Jul 6, 2023, 10:16 PM David Gesswein via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Note if your loading a FOCAL program if whatever is sending baudrate is faster than the PDP-8 transmit baud rate the loading will fail after a while with buffer overrun. I've adjusted the pot on the TTY clock card to make it load from a teletype. I'm talking if your using a PC that transmits exactly 110 baud and the PDP-8 actually transmits at 108 baud you have problems. Loading the FOCAL tape itself doesn't have this problem.
Note that some versions of the FOCAL tape have two sections so without reader run if you don't hit continue quick enough after the first halt you will not load the initial dialog.
On Thu, Jul 06, 2023 at 09:45:15PM -0400, Bill Degnan via vcf-midatlantic wrote:
Saturday at the museum we're going to try to load FOCAL from papertape into the PDP-8 system. 12 noon to ? All are welcome. Also going to document system in detail, measure voltages, etc. Kennettclassic.com Bill