Martin will be at InfoAge on July 31 from 9AM to 5PM and needs help with the following: - Set the cable anchors in the hotel basement for the fiber optic cables (about a dozen 1/4" holes in the concrete beam between the front wall of the hotel and the column by the rack) - Open up the holes for the equipment rack in the hotel basement floor. (four 1/2" holes with a hammer drill) - Mount the network equipment rack in the furnace room at the read of 9032A. - Assemble and rack the second UPS in 9059, and move red power cables to it. - Drill the hole from the media recover office on the second floor of the hotel into the attic. (one 1/2" hole with a hammer drill) - Cut the blocking for the underside of the engineers desk in 9059 with the little table saw. Anyone willing to help anywhere in that time frame? ========================================= Jeff Brace Vice President & Board Member Vintage Computer Festival East Show-runner Vintage Computer Federation is a 501c3 charity http://www.vcfed.org/ jeffrey@vcfed.org