This all came up because I wanted to replace a drive, but the only replacement I had avail was also ID 2 but a diff volume name. Systartup_v5.com was hanging on the mount of the drive. So, knowing no other way, I had to access the OS via minimal boot to bypass systartup and then comment out the mount of drive 2. In MIN state I could not mount the new drive to initialize it so re!enabled a full boot. I could not get to drive ID=2 in an ONLINE state. I mounted drive ID=2 to initialize and change its volume name to.match the old volume name. Next I returned systartup to mount drive id=2 (dkb200), and finally rebooted into a normal system. The trial and error associated with all that was a useful learning experience. Guessing there us a way from the >>> prompt to change a drive's volune, but I did not find a way to do it. Bill