I have a PDP 11/03-AA available for sale, which I will bring to VCF East. This CPU was used as the console of a VAX 11/780, and includes an RX01 floppy drive and cables. I've never gotten around to even powering up this machine, and it's time to let it go. The installed boards are: M7264 EB 11/03 processor with 4-Kword MOS RAM M7940 Serial Line Unit (SLU, Async) M7946 RX01 8" floppy disk controller M8017 Single-line async control module M7944 4-Kword 16-bit MOS RAM (external refresh) M9400 YE Headers and 240-ohm terminators (18-bit bus only) I also have the following boards to upgrade the system to something more useable: M8012 BDV11 bus terminator, bootstrap and Diagnostic Module M8044-DB 32K, 16-bit RAM M8043 Q-bus quad serial interface Also have the cable for the M7940 (BC03L-00). About the floppy drive...the M7946 is a RX01 controller, but the part number on the drive itself is for an RX02. I know practically nothing about DEC hardware, so I don't know why the discrepancy. I'll be taking offers for the whole setup (off-list, please) until midnight, May 1. Pictures are at: http://q7.neurotica.com/Oldtech/PDP1103/ Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/Oldtech/