On 5/19/2025 7:39 AM, David Waybright via vcf-midatlantic wrote:
FYI to those asking about what cable to run.
If permanent I would suggest CAT6a or 7 which would allow for multi uses of the runs! 10mb, 100mb, 1gb, or 10gb as well as regular POTS Analog Tip-Ring and even some PBX technologies like Nortel MICS.
If temporary then run whatever you have the most of laying around!
<trimming for clarity> David, So far any horizontal cabling installed by the "usual suspects" at Camp Evans has been CAT6, using methods in compliance with the BICSI TDMM [1], with the exception of mechanical fiber couplers. Due to the steam lines / radiators that were abandoned in place, and the routing of conduit used for a later electrical upgrade, permanent installation of raceway or conduit supporting the proposed horizontal cabling in a code-complaint fashion would be problematic (read customer-speak for very expensive) With 47 weeks until VCF East 2026, and the understanding that 9032A is blocked out for a significant portion of November and all of December for the Holiday Train Show, the group tackling would need to define the needs and ASAP. Cheers! Martin Flynn [1] https://www.bicsi.org/education-certification/education-@-bicsi-learning-aca...