That’s a great idea. I’ll look into that tomorrow. Something like “pip xmodem.asm=con:”? Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: Jeff Galinat <jgalinat@gmail.com> Sent: Saturday, August 1, 2020 10:35:33 PM To: vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> Cc: Richard Cini <rich.cini@gmail.com> Subject: Re: [vcf-midatlantic] Stupid CP/M question Hi Rich, I'm not the sharpest guy with this stuff so take this with a grain of salt but can't you use pip to capture the source file sent as a ascii text file via the con device? Regards, Jeff Galinat On Sat, Aug 1, 2020, 6:39 PM Richard Cini via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org<mailto:vcf-midatlantic@lists.vcfed.org>> wrote: All — I just built myself a CompuPro Z80 system out some of my spare boards. It boots CP/M from one of the Maslin 8” disk images. To facilitate getting other programs onto the disk, I want to use XMODEM from Marty Eberhard. It compiles with CP/M ASM which is good, but what’s the best way of getting the source file onto the disk? It’s not clear if the CBIOS has code for a separate PUN/RDR port. I was thinking of using ED and then, using HyperTerminal, paste the source into the ED screen and save it. I looked at the manual for ED and it’s not clear to me if I can actually do that, so I wanted to ask the group if that’s a good way or if there’s something better. Thanks! Rich Get Outlook for iOS<https://aka.ms/o0ukef>