Doug, InfoAge needs to purchase the new cable and Ty-wraps I’m not going to…. Martin Sent from my iPhone
On Nov 20, 2023, at 11:32 AM, Douglas Crawford via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote:
Fabulous Martin! Very exciting upgrades. I guess that cable needs to be protected somehow when re-run.
Members: If you haven't checked out InfoAge's ISEC, to there! There is a Apollo command module computer in addition to other great stuff there. They are working to restore the ability to move the antenna in order to be able to do, among other things, point it to the moon. Read about "project Dianna" on the web.
On 11/19/2023 7:36 AM, Martin A. Flynn via vcf-midatlantic wrote: Was on site yesterday with Bill D working on the Diana site technology "bucket list". * The new network switch is up and running (previous unit was damaged by running the UPS with bad batteries, CDL and Dan Marlow funded replacement batteries. * All four network cameras the Diana site are working. Link to screen shot: http://compdecon.org/wp-content/uploads/2023/11/diana_site_cams.jpg * Bill D installed the EMP / Lightning protectors for the exterior cameras in the furnace room, final cut over is pending. * The computers supporting the touch-screens were replaced with new units running W11, and mounted in the correct bracket on the back of the touchscreens. Link: http://compdecon.org/wp-content/uploads/2023/11/IMG_3840-scaled.jpg * The camera cables were cut (again) during landscaping activities by Wall Township. I was able to temporarily splice them, however they need to be re-run. InfoAge needs to purchase at least 100 meters of Belden/Mohawk M57622 outdoor network cable to effect permanent repair . Link to picture: http://compdecon.org/wp-content/uploads/2023/11/IMG_3876-scaled.jpg / http://compdecon.org/wp-content/uploads/2023/11/IMG_3877-scaled.jpg Wrap up (and hopefully close-out) is scheduled for Saturday, 12/02/2023 starting at 10:00 AM. Plan of the day is to wrap up the computer / camera / network tasks, along with installing the console brackets so the work surface can be fitted. If you are available and are interested in helping with the tech work, please contact me off-list. Martin Flynn