Resistor networks
I'm building out a Jade Bus Probe, and have come up empty for two resistor networks: 150 ohm, bussed, 14-pin DIP, 13 resistors (qty 8) 3.3K ohm, bussed, 8-pin SIP, 7 resistors (qty 1) Does anyone have spares on hand? I suppose I could build them out of discrete components, but I'd rather not. Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/Oldtech/
On Thu, 2 Dec 2021, Mike Loewen via vcf-midatlantic wrote:
I'm building out a Jade Bus Probe, and have come up empty for two resistor networks:
150 ohm, bussed, 14-pin DIP, 13 resistors (qty 8) 3.3K ohm, bussed, 8-pin SIP, 7 resistors (qty 1)
Does anyone have spares on hand? I suppose I could build them out of discrete components, but I'd rather not.
One part number for the 150 ohm network is Bourns 4114R-2-151. The 3.3K network would be a Bourns 4608X-101-332. Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/Oldtech/
Mike, If nothing else you could get 16 pin dip and cut off the 2 end pins, provided the 16 pin DIP would fit on the board. I have had success breaking 11 pin sips to length. I put a dab of fingernail polish to seal the broken end. You could always replace with the correct parts if you find them. Good Luck Duane On 12/2/2021 9:04 PM, Mike Loewen via vcf-midatlantic wrote:
On Thu, 2 Dec 2021, Mike Loewen via vcf-midatlantic wrote:
I'm building out a Jade Bus Probe, and have come up empty for two resistor networks:
150 ohm, bussed, 14-pin DIP, 13 resistors (qty 8) 3.3K ohm, bussed, 8-pin SIP, 7 resistors (qty 1)
Does anyone have spares on hand? I suppose I could build them out of discrete components, but I'd rather not.
One part number for the 150 ohm network is Bourns 4114R-2-151.
The 3.3K network would be a Bourns 4608X-101-332.
Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/Oldtech/
-- DuaneCraps sdɐɹɔ ǝuɐnp
On Thu, 2 Dec 2021, Mike Loewen via vcf-midatlantic wrote:
I'm building out a Jade Bus Probe, and have come up empty for two resistor networks:
150 ohm, bussed, 14-pin DIP, 13 resistors (qty 8) 3.3K ohm, bussed, 8-pin SIP, 7 resistors (qty 1)
Does anyone have spares on hand? I suppose I could build them out of discrete components, but I'd rather not.
On the advice of several people, I checked with Anchor Electronics in Santa Clara and they had the DIP resistor networks in stock, along with some other things I needed. Parts are on the way. Thanks to all who responded! Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/Oldtech/
participants (2)
-
Duane Craps -
Mike Loewen