I know that there will be less attendees for this workshop, but still wanted to send this out. The room for the workshop is cleared. There are enough outlets for the people coming. I'm told there are eight separate circuits. There are tables from 9010-B that we can use for the workshop. Looks like we are in good shape and ready to go. I just ask that everyone make sure that they take care not to mess up the carpet and to clean up afterwards as much as possible. LOCATION: InfoAge Building 9010A - (2201 Marconi Road, Wall Township, NJ) TIME: Start about 10 A.M. on Saturday and ends whenever we go to sleep. End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning) COST: $10 for all members attending the workshop, which VCF donates to InfoAge as thanks for providing the space for us. EQUIPMENT: VCF will provide a table and you can use any available electrical outlet. Bring your own tools, power strips, power cords and supplies etc. DRINKS: You should bring your own. I would recommend bringing a cooler of some type. Upon request there is a refrigerator available down the hall. FOOD: You provide your own. We may order pizza or go out to a dinner. Usually we make a decision when everyone gets hungry. GATE: Please close the front gate behind you. We want museum visitors to go to the front lobby and not wander through the middle of the campus. PARKING: Park across from 9010A on the grass area. QUESTIONS? Please ask me (Jeff Brace) or Evan. My cell is 732-759-1783 and Evan’s is 646-546-9999 in case you need to contact us. See everyone there! And have fun!
Alright, I'm 100% confirmed to be at the workshop for Saturday only. You'll get to behold my new wheels. See y'all there. -Alexander 'Z' Pierson On Wednesday, July 13, 2016 10:06 PM, Jeffrey Brace via vcf-midatlantic <vcf-midatlantic@lists.vintagecomputerfederation.org> wrote: I know that there will be less attendees for this workshop, but still wanted to send this out. The room for the workshop is cleared. There are enough outlets for the people coming. I'm told there are eight separate circuits. There are tables from 9010-B that we can use for the workshop. Looks like we are in good shape and ready to go. I just ask that everyone make sure that they take care not to mess up the carpet and to clean up afterwards as much as possible. LOCATION: InfoAge Building 9010A - (2201 Marconi Road, Wall Township, NJ) TIME: Start about 10 A.M. on Saturday and ends whenever we go to sleep. End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning) COST: $10 for all members attending the workshop, which VCF donates to InfoAge as thanks for providing the space for us. EQUIPMENT: VCF will provide a table and you can use any available electrical outlet. Bring your own tools, power strips, power cords and supplies etc. DRINKS: You should bring your own. I would recommend bringing a cooler of some type. Upon request there is a refrigerator available down the hall. FOOD: You provide your own. We may order pizza or go out to a dinner. Usually we make a decision when everyone gets hungry. GATE: Please close the front gate behind you. We want museum visitors to go to the front lobby and not wander through the middle of the campus. PARKING: Park across from 9010A on the grass area. QUESTIONS? Please ask me (Jeff Brace) or Evan. My cell is 732-759-1783 and Evan’s is 646-546-9999 in case you need to contact us. See everyone there! And have fun!
On 7/13/2016 10:05 PM, Jeffrey Brace via vcf-midatlantic wrote:
I know that there will be less attendees for this workshop, but still wanted to send this out.
The room for the workshop is cleared. There are enough outlets for the people coming. I'm told there are eight separate circuits. There are tables from 9010-B that we can use for the workshop. Looks like we are in good shape and ready to go. I just ask that everyone make sure that they take care not to mess up the carpet and to clean up afterwards as much as possible.
LOCATION: InfoAge Building 9010A - (2201 Marconi Road, Wall Township, NJ)
TIME: Start about 10 A.M. on Saturday and ends whenever we go to sleep. End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning)
COST: $10 for all members attending the workshop, which VCF donates to InfoAge as thanks for providing the space for us.
EQUIPMENT: VCF will provide a table and you can use any available electrical outlet. Bring your own tools, power strips, power cords and supplies etc.
DRINKS: You should bring your own. I would recommend bringing a cooler of some type. Upon request there is a refrigerator available down the hall.
FOOD: You provide your own. We may order pizza or go out to a dinner. Usually we make a decision when everyone gets hungry.
GATE:
Please close the front gate behind you. We want museum visitors to go to the front lobby and not wander through the middle of the campus.
PARKING: Park across from 9010A on the grass area.
QUESTIONS?
Please ask me (Jeff Brace) or Evan. My cell is 732-759-1783 and Evan’s is 646-546-9999 in case you need to contact us.
See everyone there! And have fun!
Is there still enough room for one more at the workshop on sunday only? I have a dectalk-III PSU I need to re-cap and test... -- Jonathan Gevaryahu jgevaryahu@gmail.com jgevaryahu@hotmail.com
Yes, but you have to help move the table over that you will use. ;) On Fri, Jul 15, 2016 at 11:56 AM, Jonathan Gevaryahu via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
On 7/13/2016 10:05 PM, Jeffrey Brace via vcf-midatlantic wrote:
I know that there will be less attendees for this workshop, but still wanted to send this out.
The room for the workshop is cleared. There are enough outlets for the people coming. I'm told there are eight separate circuits. There are tables from 9010-B that we can use for the workshop. Looks like we are in good shape and ready to go. I just ask that everyone make sure that they take care not to mess up the carpet and to clean up afterwards as much as possible.
LOCATION: InfoAge Building 9010A - (2201 Marconi Road, Wall Township, NJ)
TIME: Start about 10 A.M. on Saturday and ends whenever we go to sleep. End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning)
COST: $10 for all members attending the workshop, which VCF donates to InfoAge as thanks for providing the space for us.
EQUIPMENT: VCF will provide a table and you can use any available electrical outlet. Bring your own tools, power strips, power cords and supplies etc.
DRINKS: You should bring your own. I would recommend bringing a cooler of some type. Upon request there is a refrigerator available down the hall.
FOOD: You provide your own. We may order pizza or go out to a dinner. Usually we make a decision when everyone gets hungry.
GATE:
Please close the front gate behind you. We want museum visitors to go to the front lobby and not wander through the middle of the campus.
PARKING: Park across from 9010A on the grass area.
QUESTIONS?
Please ask me (Jeff Brace) or Evan. My cell is 732-759-1783 and Evan’s is 646-546-9999 in case you need to contact us.
See everyone there! And have fun!
Is there still enough room for one more at the workshop on sunday only? I have a dectalk-III PSU I need to re-cap and test...
-- Jonathan Gevaryahu jgevaryahu@gmail.com jgevaryahu@hotmail.com
On that note, I think we will be switching to Saturday. Dies that work? On Friday, July 15, 2016, Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Yes, but you have to help move the table over that you will use. ;)
On Fri, Jul 15, 2016 at 11:56 AM, Jonathan Gevaryahu via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org <javascript:;>> wrote:
On 7/13/2016 10:05 PM, Jeffrey Brace via vcf-midatlantic wrote:
I know that there will be less attendees for this workshop, but still wanted to send this out.
The room for the workshop is cleared. There are enough outlets for the people coming. I'm told there are eight separate circuits. There are tables from 9010-B that we can use for the workshop. Looks like we are in good shape and ready to go. I just ask that everyone make sure that they take care not to mess up the carpet and to clean up afterwards as much as possible.
LOCATION: InfoAge Building 9010A - (2201 Marconi Road, Wall Township, NJ)
TIME: Start about 10 A.M. on Saturday and ends whenever we go to sleep. End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning)
COST: $10 for all members attending the workshop, which VCF donates to InfoAge as thanks for providing the space for us.
EQUIPMENT: VCF will provide a table and you can use any available electrical outlet. Bring your own tools, power strips, power cords and supplies etc.
DRINKS: You should bring your own. I would recommend bringing a cooler of some type. Upon request there is a refrigerator available down the hall.
FOOD: You provide your own. We may order pizza or go out to a dinner. Usually we make a decision when everyone gets hungry.
GATE:
Please close the front gate behind you. We want museum visitors to go to the front lobby and not wander through the middle of the campus.
PARKING: Park across from 9010A on the grass area.
QUESTIONS?
Please ask me (Jeff Brace) or Evan. My cell is 732-759-1783 and Evan’s is 646-546-9999 in case you need to contact us.
See everyone there! And have fun!
Is there still enough room for one more at the workshop on sunday only? I have a dectalk-III PSU I need to re-cap and test...
-- Jonathan Gevaryahu jgevaryahu@gmail.com <javascript:;> jgevaryahu@hotmail.com <javascript:;>
Switching entirely to Saturday, meaning there will no longer be any meetup on Sunday, July 17th whatsoever? That doesn't work for me, unfortunately. On 7/15/2016 5:42 PM, Dean Notarnicola via vcf-midatlantic wrote:
On that note, I think we will be switching to Saturday. Dies that work?
On Friday, July 15, 2016, Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Yes, but you have to help move the table over that you will use. ;)
On Fri, Jul 15, 2016 at 11:56 AM, Jonathan Gevaryahu via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org <javascript:;>> wrote:
On 7/13/2016 10:05 PM, Jeffrey Brace via vcf-midatlantic wrote:
I know that there will be less attendees for this workshop, but still wanted to send this out.
The room for the workshop is cleared. There are enough outlets for the people coming. I'm told there are eight separate circuits. There are tables from 9010-B that we can use for the workshop. Looks like we are in good shape and ready to go. I just ask that everyone make sure that they take care not to mess up the carpet and to clean up afterwards as much as possible.
LOCATION: InfoAge Building 9010A - (2201 Marconi Road, Wall Township, NJ)
TIME: Start about 10 A.M. on Saturday and ends whenever we go to sleep. End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning)
COST: $10 for all members attending the workshop, which VCF donates to InfoAge as thanks for providing the space for us.
EQUIPMENT: VCF will provide a table and you can use any available electrical outlet. Bring your own tools, power strips, power cords and supplies etc.
DRINKS: You should bring your own. I would recommend bringing a cooler of some type. Upon request there is a refrigerator available down the hall.
FOOD: You provide your own. We may order pizza or go out to a dinner. Usually we make a decision when everyone gets hungry.
GATE:
Please close the front gate behind you. We want museum visitors to go to the front lobby and not wander through the middle of the campus.
PARKING: Park across from 9010A on the grass area.
QUESTIONS?
Please ask me (Jeff Brace) or Evan. My cell is 732-759-1783 and Evan’s is 646-546-9999 in case you need to contact us.
See everyone there! And have fun!
Is there still enough room for one more at the workshop on sunday only? I have a dectalk-III PSU I need to re-cap and test...
-- Jonathan Gevaryahu jgevaryahu@gmail.com <javascript:;> jgevaryahu@hotmail.com <javascript:;>
-- Jonathan Gevaryahu jgevaryahu@gmail.com jgevaryahu@hotmail.com
Dean, I'm unclear why you are switching to Saturday. What's the reason? The workshop will open for both Saturday and Sunday. There are some people coming Sunday only, some Saturday only and some all weekend. Please ask questions if anything is unclear. I thought I was clear on the workshop days and times, but apparently I was not. == Jeff Brace On Fri, Jul 15, 2016 at 6:06 PM, Jonathan Gevaryahu via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Switching entirely to Saturday, meaning there will no longer be any meetup on Sunday, July 17th whatsoever? That doesn't work for me, unfortunately.
On 7/15/2016 5:42 PM, Dean Notarnicola via vcf-midatlantic wrote:
On that note, I think we will be switching to Saturday. Dies that work?
On Friday, July 15, 2016, Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Yes, but you have to help move the table over that you will use. ;)
On Fri, Jul 15, 2016 at 11:56 AM, Jonathan Gevaryahu via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org <javascript:;>> wrote:
On 7/13/2016 10:05 PM, Jeffrey Brace via vcf-midatlantic wrote:
I know that there will be less attendees for this workshop, but still
wanted to send this out.
The room for the workshop is cleared. There are enough outlets for the people coming. I'm told there are eight separate circuits. There are tables from 9010-B that we can use for the workshop. Looks like we are in good shape and ready to go. I just ask that everyone make sure that they take care not to mess up the carpet and to clean up afterwards as much as possible.
LOCATION: InfoAge Building 9010A - (2201 Marconi Road, Wall Township, NJ)
TIME: Start about 10 A.M. on Saturday and ends whenever we go to sleep. End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning)
COST: $10 for all members attending the workshop, which VCF donates to InfoAge as thanks for providing the space for us.
EQUIPMENT: VCF will provide a table and you can use any available electrical
outlet.
Bring your own tools, power strips, power cords and supplies etc.
DRINKS: You should bring your own. I would recommend bringing a cooler of some type. Upon request there is a refrigerator available down the hall.
FOOD: You provide your own. We may order pizza or go out to a dinner. Usually
we
make a decision when everyone gets hungry.
GATE:
Please close the front gate behind you. We want museum visitors to go to the front lobby and not wander through the middle of the campus.
PARKING: Park across from 9010A on the grass area.
QUESTIONS?
Please ask me (Jeff Brace) or Evan. My cell is 732-759-1783 and Evan’s
is
646-546-9999 in case you need to contact us.
See everyone there! And have fun!
Is there still enough room for one more at the workshop on sunday only?
I have a dectalk-III PSU I need to re-cap and test...
-- Jonathan Gevaryahu jgevaryahu@gmail.com <javascript:;> jgevaryahu@hotmail.com <javascript:;>
-- Jonathan Gevaryahu jgevaryahu@gmail.com jgevaryahu@hotmail.com
It's just much more convenient for us as some personal things have come up. If that is an issue then we'll come to the next workshop in August. I'm sorry if we created a problem. On Friday, July 15, 2016, Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Dean, I'm unclear why you are switching to Saturday. What's the reason?
The workshop will open for both Saturday and Sunday. There are some people coming Sunday only, some Saturday only and some all weekend.
Please ask questions if anything is unclear. I thought I was clear on the workshop days and times, but apparently I was not.
== Jeff Brace
On Fri, Jul 15, 2016 at 6:06 PM, Jonathan Gevaryahu via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org <javascript:;>> wrote:
Switching entirely to Saturday, meaning there will no longer be any meetup on Sunday, July 17th whatsoever? That doesn't work for me, unfortunately.
On 7/15/2016 5:42 PM, Dean Notarnicola via vcf-midatlantic wrote:
On that note, I think we will be switching to Saturday. Dies that work?
On Friday, July 15, 2016, Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org <javascript:;>> wrote:
Yes, but you have to help move the table over that you will use. ;)
On Fri, Jul 15, 2016 at 11:56 AM, Jonathan Gevaryahu via
vcf-midatlantic
< vcf-midatlantic@lists.vintagecomputerfederation.org <javascript:;> <javascript:;>> wrote:
On 7/13/2016 10:05 PM, Jeffrey Brace via vcf-midatlantic wrote:
I know that there will be less attendees for this workshop, but still
wanted to send this out.
The room for the workshop is cleared. There are enough outlets for
the
people coming. I'm told there are eight separate circuits. There are tables from 9010-B that we can use for the workshop. Looks like we are in good shape and ready to go. I just ask that everyone make sure that they take care not to mess up the carpet and to clean up afterwards as much as possible.
LOCATION: InfoAge Building 9010A - (2201 Marconi Road, Wall Township, NJ)
TIME: Start about 10 A.M. on Saturday and ends whenever we go to sleep. End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning)
COST: $10 for all members attending the workshop, which VCF donates to InfoAge as thanks for providing the space for us.
EQUIPMENT: VCF will provide a table and you can use any available electrical
outlet.
Bring your own tools, power strips, power cords and supplies etc.
DRINKS: You should bring your own. I would recommend bringing a cooler of
some
type. Upon request there is a refrigerator available down the hall.
FOOD: You provide your own. We may order pizza or go out to a dinner. Usually
we
make a decision when everyone gets hungry.
GATE:
Please close the front gate behind you. We want museum visitors to go to the front lobby and not wander through the middle of the campus.
PARKING: Park across from 9010A on the grass area.
QUESTIONS?
Please ask me (Jeff Brace) or Evan. My cell is 732-759-1783 and
Evan’s
is
646-546-9999 in case you need to contact us.
See everyone there! And have fun!
Is there still enough room for one more at the workshop on sunday
only?
I have a dectalk-III PSU I need to re-cap and test...
-- Jonathan Gevaryahu jgevaryahu@gmail.com <javascript:;> <javascript:;> jgevaryahu@hotmail.com <javascript:;> <javascript:;>
-- Jonathan Gevaryahu jgevaryahu@gmail.com <javascript:;> jgevaryahu@hotmail.com <javascript:;>
Dean, No problem. I was just curious. You are welcome to come either or both days! On Fri, Jul 15, 2016 at 7:13 PM, Dean Notarnicola <dnotarnicola@gmail.com> wrote:
It's just much more convenient for us as some personal things have come up. If that is an issue then we'll come to the next workshop in August. I'm sorry if we created a problem.
On Friday, July 15, 2016, Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Dean, I'm unclear why you are switching to Saturday. What's the reason?
The workshop will open for both Saturday and Sunday. There are some people coming Sunday only, some Saturday only and some all weekend.
Please ask questions if anything is unclear. I thought I was clear on the workshop days and times, but apparently I was not.
== Jeff Brace
On Fri, Jul 15, 2016 at 6:06 PM, Jonathan Gevaryahu via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Switching entirely to Saturday, meaning there will no longer be any meetup on Sunday, July 17th whatsoever? That doesn't work for me, unfortunately.
On 7/15/2016 5:42 PM, Dean Notarnicola via vcf-midatlantic wrote:
On that note, I think we will be switching to Saturday. Dies that work?
On Friday, July 15, 2016, Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Yes, but you have to help move the table over that you will use. ;)
On Fri, Jul 15, 2016 at 11:56 AM, Jonathan Gevaryahu via
vcf-midatlantic
< vcf-midatlantic@lists.vintagecomputerfederation.org <javascript:;>> wrote:
On 7/13/2016 10:05 PM, Jeffrey Brace via vcf-midatlantic wrote:
I know that there will be less attendees for this workshop, but still > wanted to send this out. > > > The room for the workshop is cleared. There are enough outlets for
the
> people coming. I'm told there are eight separate circuits. There are > tables > from 9010-B that we can use for the workshop. Looks like we are in good > shape and ready to go. I just ask that everyone make sure that they > take > care not to mess up the carpet and to clean up afterwards as much as > possible. > > > LOCATION: > InfoAge Building 9010A - (2201 Marconi Road, Wall Township, NJ) > > TIME: > Start about 10 A.M. on Saturday and ends whenever we go to sleep. > End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning) > > COST: > $10 for all members attending the workshop, which VCF donates to > InfoAge > as > thanks for providing the space for us. > > EQUIPMENT: > VCF will provide a table and you can use any available electrical > outlet.
Bring your own tools, power strips, power cords and supplies etc. > > DRINKS: > You should bring your own. I would recommend bringing a cooler of some > type. Upon request there is a refrigerator available down the hall. > > FOOD: > You provide your own. We may order pizza or go out to a dinner. Usually > we
make a decision when everyone gets hungry. > > GATE: > > Please close the front gate behind you. We want museum visitors to go > to > the front lobby and not wander through the middle of the campus. > > PARKING: > Park across from 9010A on the grass area. > > > QUESTIONS? > > Please ask me (Jeff Brace) or Evan. My cell is 732-759-1783 and Evan’s > is
646-546-9999 in case you need to contact us. > > > See everyone there! And have fun! > > Is there still enough room for one more at the workshop on sunday only? > I have a dectalk-III PSU I need to re-cap and test...
-- Jonathan Gevaryahu jgevaryahu@gmail.com <javascript:;> jgevaryahu@hotmail.com <javascript:;>
-- Jonathan Gevaryahu jgevaryahu@gmail.com jgevaryahu@hotmail.com
Thank you. I'm sincerely sorry if this negatively impacts anyone else's plans. Summer is a challenging time. On Friday, July 15, 2016, Jeffrey Brace <ark72axow@gmail.com> wrote:
Dean,
No problem. I was just curious. You are welcome to come either or both days!
On Fri, Jul 15, 2016 at 7:13 PM, Dean Notarnicola <dnotarnicola@gmail.com <javascript:_e(%7B%7D,'cvml','dnotarnicola@gmail.com');>> wrote:
It's just much more convenient for us as some personal things have come up. If that is an issue then we'll come to the next workshop in August. I'm sorry if we created a problem.
On Friday, July 15, 2016, Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org <javascript:_e(%7B%7D,'cvml','vcf-midatlantic@lists.vintagecomputerfederation.org');>> wrote:
Dean, I'm unclear why you are switching to Saturday. What's the reason?
The workshop will open for both Saturday and Sunday. There are some people coming Sunday only, some Saturday only and some all weekend.
Please ask questions if anything is unclear. I thought I was clear on the workshop days and times, but apparently I was not.
== Jeff Brace
On Fri, Jul 15, 2016 at 6:06 PM, Jonathan Gevaryahu via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Switching entirely to Saturday, meaning there will no longer be any meetup on Sunday, July 17th whatsoever? That doesn't work for me, unfortunately.
On 7/15/2016 5:42 PM, Dean Notarnicola via vcf-midatlantic wrote:
On that note, I think we will be switching to Saturday. Dies that work?
On Friday, July 15, 2016, Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Yes, but you have to help move the table over that you will use. ;)
On Fri, Jul 15, 2016 at 11:56 AM, Jonathan Gevaryahu via
vcf-midatlantic
< vcf-midatlantic@lists.vintagecomputerfederation.org <javascript:;>> wrote:
On 7/13/2016 10:05 PM, Jeffrey Brace via vcf-midatlantic wrote: > > I know that there will be less attendees for this workshop, but still >> wanted to send this out. >> >> >> The room for the workshop is cleared. There are enough outlets for the >> people coming. I'm told there are eight separate circuits. There are >> tables >> from 9010-B that we can use for the workshop. Looks like we are in good >> shape and ready to go. I just ask that everyone make sure that they >> take >> care not to mess up the carpet and to clean up afterwards as much as >> possible. >> >> >> LOCATION: >> InfoAge Building 9010A - (2201 Marconi Road, Wall Township, NJ) >> >> TIME: >> Start about 10 A.M. on Saturday and ends whenever we go to sleep. >> End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning) >> >> COST: >> $10 for all members attending the workshop, which VCF donates to >> InfoAge >> as >> thanks for providing the space for us. >> >> EQUIPMENT: >> VCF will provide a table and you can use any available electrical >> > outlet.
> Bring your own tools, power strips, power cords and supplies etc. >> >> DRINKS: >> You should bring your own. I would recommend bringing a cooler of some >> type. Upon request there is a refrigerator available down the hall. >> >> FOOD: >> You provide your own. We may order pizza or go out to a dinner. Usually >> > we
> make a decision when everyone gets hungry. >> >> GATE: >> >> Please close the front gate behind you. We want museum visitors to go >> to >> the front lobby and not wander through the middle of the campus. >> >> PARKING: >> Park across from 9010A on the grass area. >> >> >> QUESTIONS? >> >> Please ask me (Jeff Brace) or Evan. My cell is 732-759-1783 and Evan’s >> > is
> 646-546-9999 in case you need to contact us. >> >> >> See everyone there! And have fun! >> >> Is there still enough room for one more at the workshop on sunday only? >> > I have a dectalk-III PSU I need to re-cap and test... > > > -- > Jonathan Gevaryahu > jgevaryahu@gmail.com <javascript:;> > jgevaryahu@hotmail.com <javascript:;> > > >
-- Jonathan Gevaryahu jgevaryahu@gmail.com jgevaryahu@hotmail.com
Dean, If doesn't affect my plans at all! It is a simple adjustment for me. I can't say for anyone else. == Jeff Brace On Fri, Jul 15, 2016 at 7:19 PM, Dean Notarnicola <dnotarnicola@gmail.com> wrote:
Thank you. I'm sincerely sorry if this negatively impacts anyone else's plans. Summer is a challenging time.
On Friday, July 15, 2016, Jeffrey Brace <ark72axow@gmail.com> wrote:
Dean,
No problem. I was just curious. You are welcome to come either or both days!
On Fri, Jul 15, 2016 at 7:13 PM, Dean Notarnicola <dnotarnicola@gmail.com
wrote:
It's just much more convenient for us as some personal things have come up. If that is an issue then we'll come to the next workshop in August. I'm sorry if we created a problem.
On Friday, July 15, 2016, Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Dean, I'm unclear why you are switching to Saturday. What's the reason?
The workshop will open for both Saturday and Sunday. There are some people coming Sunday only, some Saturday only and some all weekend.
Please ask questions if anything is unclear. I thought I was clear on the workshop days and times, but apparently I was not.
== Jeff Brace
On Fri, Jul 15, 2016 at 6:06 PM, Jonathan Gevaryahu via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Switching entirely to Saturday, meaning there will no longer be any meetup on Sunday, July 17th whatsoever? That doesn't work for me, unfortunately.
On 7/15/2016 5:42 PM, Dean Notarnicola via vcf-midatlantic wrote:
On that note, I think we will be switching to Saturday. Dies that work?
On Friday, July 15, 2016, Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Yes, but you have to help move the table over that you will use. ;) > > On Fri, Jul 15, 2016 at 11:56 AM, Jonathan Gevaryahu via vcf-midatlantic > < > vcf-midatlantic@lists.vintagecomputerfederation.org <javascript:;>> > wrote: > > On 7/13/2016 10:05 PM, Jeffrey Brace via vcf-midatlantic wrote: >> >> I know that there will be less attendees for this workshop, but still >>> wanted to send this out. >>> >>> >>> The room for the workshop is cleared. There are enough outlets for the >>> people coming. I'm told there are eight separate circuits. There are >>> tables >>> from 9010-B that we can use for the workshop. Looks like we are in good >>> shape and ready to go. I just ask that everyone make sure that they >>> take >>> care not to mess up the carpet and to clean up afterwards as much as >>> possible. >>> >>> >>> LOCATION: >>> InfoAge Building 9010A - (2201 Marconi Road, Wall Township, NJ) >>> >>> TIME: >>> Start about 10 A.M. on Saturday and ends whenever we go to sleep. >>> End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning) >>> >>> COST: >>> $10 for all members attending the workshop, which VCF donates to >>> InfoAge >>> as >>> thanks for providing the space for us. >>> >>> EQUIPMENT: >>> VCF will provide a table and you can use any available electrical >>> >> outlet. > >> Bring your own tools, power strips, power cords and supplies etc. >>> >>> DRINKS: >>> You should bring your own. I would recommend bringing a cooler of some >>> type. Upon request there is a refrigerator available down the hall. >>> >>> FOOD: >>> You provide your own. We may order pizza or go out to a dinner. Usually >>> >> we > >> make a decision when everyone gets hungry. >>> >>> GATE: >>> >>> Please close the front gate behind you. We want museum visitors to go >>> to >>> the front lobby and not wander through the middle of the campus. >>> >>> PARKING: >>> Park across from 9010A on the grass area. >>> >>> >>> QUESTIONS? >>> >>> Please ask me (Jeff Brace) or Evan. My cell is 732-759-1783 and Evan’s >>> >> is > >> 646-546-9999 in case you need to contact us. >>> >>> >>> See everyone there! And have fun! >>> >>> Is there still enough room for one more at the workshop on sunday only? >>> >> I have a dectalk-III PSU I need to re-cap and test... >> >> >> -- >> Jonathan Gevaryahu >> jgevaryahu@gmail.com <javascript:;> >> jgevaryahu@hotmail.com <javascript:;> >> >> >>
-- Jonathan Gevaryahu jgevaryahu@gmail.com jgevaryahu@hotmail.com
Understood, thanks. Dean On Friday, July 15, 2016, Jeffrey Brace <ark72axow@gmail.com> wrote:
Dean,
If doesn't affect my plans at all! It is a simple adjustment for me. I can't say for anyone else.
== Jeff Brace
On Fri, Jul 15, 2016 at 7:19 PM, Dean Notarnicola <dnotarnicola@gmail.com <javascript:_e(%7B%7D,'cvml','dnotarnicola@gmail.com');>> wrote:
Thank you. I'm sincerely sorry if this negatively impacts anyone else's plans. Summer is a challenging time.
On Friday, July 15, 2016, Jeffrey Brace <ark72axow@gmail.com <javascript:_e(%7B%7D,'cvml','ark72axow@gmail.com');>> wrote:
Dean,
No problem. I was just curious. You are welcome to come either or both days!
On Fri, Jul 15, 2016 at 7:13 PM, Dean Notarnicola < dnotarnicola@gmail.com> wrote:
It's just much more convenient for us as some personal things have come up. If that is an issue then we'll come to the next workshop in August. I'm sorry if we created a problem.
On Friday, July 15, 2016, Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Dean, I'm unclear why you are switching to Saturday. What's the reason?
The workshop will open for both Saturday and Sunday. There are some people coming Sunday only, some Saturday only and some all weekend.
Please ask questions if anything is unclear. I thought I was clear on the workshop days and times, but apparently I was not.
== Jeff Brace
On Fri, Jul 15, 2016 at 6:06 PM, Jonathan Gevaryahu via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Switching entirely to Saturday, meaning there will no longer be any meetup on Sunday, July 17th whatsoever? That doesn't work for me, unfortunately.
On 7/15/2016 5:42 PM, Dean Notarnicola via vcf-midatlantic wrote:
> On that note, I think we will be switching to Saturday. Dies that work? > > On Friday, July 15, 2016, Jeffrey Brace via vcf-midatlantic < > vcf-midatlantic@lists.vintagecomputerfederation.org> wrote: > > Yes, but you have to help move the table over that you will use. ;) >> >> On Fri, Jul 15, 2016 at 11:56 AM, Jonathan Gevaryahu via vcf-midatlantic >> < >> vcf-midatlantic@lists.vintagecomputerfederation.org <javascript:;>> >> wrote: >> >> On 7/13/2016 10:05 PM, Jeffrey Brace via vcf-midatlantic wrote: >>> >>> I know that there will be less attendees for this workshop, but still >>>> wanted to send this out. >>>> >>>> >>>> The room for the workshop is cleared. There are enough outlets for the >>>> people coming. I'm told there are eight separate circuits. There are >>>> tables >>>> from 9010-B that we can use for the workshop. Looks like we are in good >>>> shape and ready to go. I just ask that everyone make sure that they >>>> take >>>> care not to mess up the carpet and to clean up afterwards as much as >>>> possible. >>>> >>>> >>>> LOCATION: >>>> InfoAge Building 9010A - (2201 Marconi Road, Wall Township, NJ) >>>> >>>> TIME: >>>> Start about 10 A.M. on Saturday and ends whenever we go to sleep. >>>> End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning) >>>> >>>> COST: >>>> $10 for all members attending the workshop, which VCF donates to >>>> InfoAge >>>> as >>>> thanks for providing the space for us. >>>> >>>> EQUIPMENT: >>>> VCF will provide a table and you can use any available electrical >>>> >>> outlet. >> >>> Bring your own tools, power strips, power cords and supplies etc. >>>> >>>> DRINKS: >>>> You should bring your own. I would recommend bringing a cooler of some >>>> type. Upon request there is a refrigerator available down the hall. >>>> >>>> FOOD: >>>> You provide your own. We may order pizza or go out to a dinner. Usually >>>> >>> we >> >>> make a decision when everyone gets hungry. >>>> >>>> GATE: >>>> >>>> Please close the front gate behind you. We want museum visitors to go >>>> to >>>> the front lobby and not wander through the middle of the campus. >>>> >>>> PARKING: >>>> Park across from 9010A on the grass area. >>>> >>>> >>>> QUESTIONS? >>>> >>>> Please ask me (Jeff Brace) or Evan. My cell is 732-759-1783 and Evan’s >>>> >>> is >> >>> 646-546-9999 in case you need to contact us. >>>> >>>> >>>> See everyone there! And have fun! >>>> >>>> Is there still enough room for one more at the workshop on sunday only? >>>> >>> I have a dectalk-III PSU I need to re-cap and test... >>> >>> >>> -- >>> Jonathan Gevaryahu >>> jgevaryahu@gmail.com <javascript:;> >>> jgevaryahu@hotmail.com <javascript:;> >>> >>> >>>
-- Jonathan Gevaryahu jgevaryahu@gmail.com jgevaryahu@hotmail.com
Switching entirely to Saturday, meaning there will no longer be any meetup on Sunday, July 17th whatsoever?
Dean meant he and his son are switching their attendance to Saturday. The workshop is both days, although it sounds like this one will be small-ish. Sometimes we get 20 people.
On Fri, Jul 15, 2016 at 7:29 PM, Evan Koblentz via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Switching entirely to Saturday, meaning there will no longer be any meetup on Sunday, July 17th whatsoever?
Dean meant he and his son are switching their attendance to Saturday. The workshop is both days, although it sounds like this one will be small-ish. Sometimes we get 20 people.
I am confused, how many days are there this weekend? I heard there was a negative leap day this weekend, but I am unsure if whatever you fix on Saturday will undo itself Sunday morning. -- @ BillDeg: Web: vintagecomputer.net Twitter: @billdeg <https://twitter.com/billdeg> Youtube: @billdeg <https://www.youtube.com/user/billdeg> Unauthorized Bio <http://www.vintagecomputer.net/readme.cfm>
Yes you are correct there are three days this weekend, 0, 1 and 2. 0 being Saturday and 2 being Sunday. 0 comes in between Saturday and Sunday and is only a split second to us mere mortals who measure time the old fashioned way. It is actually 24 hours long and is at midnight Saturday night. We shall call this day Interday. If you blink you will miss it. So don't blink. == Jeff Brace On Fri, Jul 15, 2016 at 7:44 PM, william degnan via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
On Fri, Jul 15, 2016 at 7:29 PM, Evan Koblentz via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Switching entirely to Saturday, meaning there will no longer be any meetup on Sunday, July 17th whatsoever?
Dean meant he and his son are switching their attendance to Saturday. The workshop is both days, although it sounds like this one will be small-ish. Sometimes we get 20 people.
I am confused, how many days are there this weekend? I heard there was a negative leap day this weekend, but I am unsure if whatever you fix on Saturday will undo itself Sunday morning. -- @ BillDeg: Web: vintagecomputer.net Twitter: @billdeg <https://twitter.com/billdeg> Youtube: @billdeg <https://www.youtube.com/user/billdeg> Unauthorized Bio <http://www.vintagecomputer.net/readme.cfm>
participants (6)
-
Alexander Pierson -
Dean Notarnicola -
Evan Koblentz -
Jeffrey Brace -
Jonathan Gevaryahu -
william degnan