Re: [vcf-midatlantic] Interest in a Workshop at System Source, in Hunt Valley, MD?
Bill Dromgoole, I think that you may be misunderstanding something. The workshop that Alex is talking about is in Hunt Valley, Maryland, NOT at the VCF museum, NOT at InfoAge. Jeff On Sun, Aug 26, 2018 at 4:56 PM Bill Dromgoole via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Yes, I am interested In both days at the museum. I want to survey Bob’s Univac 1218 and Univac 490 to see what is needed to get them lit off. I am pretty sure that Duane is also interested in powering up the Univacs.
Do we have any firm dates or a signup list yet? I have both suggested dates marked on my calendar.
Bill Dromgoole
From: Bill Degnan via vcf-midatlantic Sent: Monday, August 20, 2018 9:05 AM To: vcf-midatlantic Cc: Bill Degnan Subject: Re: [vcf-midatlantic] Interest in a Workshop at System Source,in Hunt Valley, MD?
certainly if possible to have one on both weekends so everyone interested can attend at least one. I can help more with the November workshop but I'd probably go to both at least one day each.
For those of you who don't know, Bob has a private museum with a ton of computer exhibits ranging the entire spectrum of machines. the official web site https://museum.syssrc.com/
I helped Bob organize a workshop in 2014: http://vintagecomputer.net/browse_thread.cfm?id=537 It has been too long since we had a workshop there, I am glad someone is taking the initiative.
Bill
On Mon, Aug 20, 2018 at 7:45 AM Jason Perkins via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
I'd definitely want to come. I'd think the September dates would be better for me, I'm checking to be sure.
On Sun, Aug 19, 2018 at 10:06 PM, J. Alexander Jacocks via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
All,
Since we can't have a workshop at InfoAge, this fall, I propose (along with Bob Roswell) that we have a workshop at Bob's System Source Computer Museum, in Hunt Valley, MD.
I talked to Bob, and he and I are both available on the following dates: September 29th/30th November 10th/11th
We're not yet sure if this will be a 1-day or a 2-day workshop. Please let me know if you are available on either of the dates, and I'll tally the results.
Thanks! - Alex
-- Jason Perkins 313 355 0085
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
Nope, Bill's not misunderstanding -- Bob R. (who owns the place in MD) has his own UNIVAC. Slightly different model than ours and I think he only has the CPU.
Bill Dromgoole,
I think that you may be misunderstanding something. The workshop that Alex is talking about is in Hunt Valley, Maryland, NOT at the VCF museum, NOT at InfoAge.
Jeff
On Sun, Aug 26, 2018 at 4:56 PM Bill Dromgoole via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Yes, I am interested In both days at the museum. I want to survey Bob’s Univac 1218 and Univac 490 to see what is needed to get them lit off. I am pretty sure that Duane is also interested in powering up the Univacs.
Do we have any firm dates or a signup list yet? I have both suggested dates marked on my calendar.
Bill Dromgoole
From: Bill Degnan via vcf-midatlantic Sent: Monday, August 20, 2018 9:05 AM To: vcf-midatlantic Cc: Bill Degnan Subject: Re: [vcf-midatlantic] Interest in a Workshop at System Source,in Hunt Valley, MD?
certainly if possible to have one on both weekends so everyone interested can attend at least one. I can help more with the November workshop but I'd probably go to both at least one day each.
For those of you who don't know, Bob has a private museum with a ton of computer exhibits ranging the entire spectrum of machines. the official web site https://museum.syssrc.com/
I helped Bob organize a workshop in 2014: http://vintagecomputer.net/browse_thread.cfm?id=537 It has been too long since we had a workshop there, I am glad someone is taking the initiative.
Bill
On Mon, Aug 20, 2018 at 7:45 AM Jason Perkins via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
I'd definitely want to come. I'd think the September dates would be better for me, I'm checking to be sure.
On Sun, Aug 19, 2018 at 10:06 PM, J. Alexander Jacocks via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
All,
Since we can't have a workshop at InfoAge, this fall, I propose (along with Bob Roswell) that we have a workshop at Bob's System Source Computer Museum, in Hunt Valley, MD.
I talked to Bob, and he and I are both available on the following dates: September 29th/30th November 10th/11th
We're not yet sure if this will be a 1-day or a 2-day workshop. Please let me know if you are available on either of the dates, and I'll tally the results.
Thanks! - Alex
-- Jason Perkins 313 355 0085
________________________________ Evan Koblentz, executive director Vintage Computer Federation a 501(c)(3) educational non-profit evan@vcfed.org (646) 546-9999 www.vcfed.org facebook.com/vcfederation twitter.com/vcfederation instagram.com/vcfederation
Bob's place is a museum too, at least a private one. He has UNIVACs there too. b On Mon, Aug 27, 2018 at 2:17 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Bill Dromgoole,
I think that you may be misunderstanding something. The workshop that Alex is talking about is in Hunt Valley, Maryland, NOT at the VCF museum, NOT at InfoAge.
Jeff
On Sun, Aug 26, 2018 at 4:56 PM Bill Dromgoole via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Yes, I am interested In both days at the museum. I want to survey Bob’s Univac 1218 and Univac 490 to see what is needed to get them lit off. I am pretty sure that Duane is also interested in powering up the Univacs.
Do we have any firm dates or a signup list yet? I have both suggested dates marked on my calendar.
Bill Dromgoole
From: Bill Degnan via vcf-midatlantic Sent: Monday, August 20, 2018 9:05 AM To: vcf-midatlantic Cc: Bill Degnan Subject: Re: [vcf-midatlantic] Interest in a Workshop at System Source,in Hunt Valley, MD?
certainly if possible to have one on both weekends so everyone interested can attend at least one. I can help more with the November workshop but I'd probably go to both at least one day each.
For those of you who don't know, Bob has a private museum with a ton of computer exhibits ranging the entire spectrum of machines. the official web site https://museum.syssrc.com/
I helped Bob organize a workshop in 2014: http://vintagecomputer.net/browse_thread.cfm?id=537 It has been too long since we had a workshop there, I am glad someone is taking the initiative.
Bill
On Mon, Aug 20, 2018 at 7:45 AM Jason Perkins via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
I'd definitely want to come. I'd think the September dates would be better for me, I'm checking to be sure.
On Sun, Aug 19, 2018 at 10:06 PM, J. Alexander Jacocks via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
All,
Since we can't have a workshop at InfoAge, this fall, I propose (along with Bob Roswell) that we have a workshop at Bob's System Source Computer Museum, in Hunt Valley, MD.
I talked to Bob, and he and I are both available on the following dates: September 29th/30th November 10th/11th
We're not yet sure if this will be a 1-day or a 2-day workshop. Please let me know if you are available on either of the dates, and I'll tally the results.
Thanks! - Alex
-- Jason Perkins 313 355 0085
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
The museum is really well done. Definitely worth a visit when near Baltimore, Maryland. - Alex On Mon, Aug 27, 2018 at 3:42 PM Bill Degnan via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Bob's place is a museum too, at least a private one. He has UNIVACs there too. b
On Mon, Aug 27, 2018 at 2:17 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Bill Dromgoole,
I think that you may be misunderstanding something. The workshop that Alex is talking about is in Hunt Valley, Maryland, NOT at the VCF museum, NOT at InfoAge.
Jeff
On Sun, Aug 26, 2018 at 4:56 PM Bill Dromgoole via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Yes, I am interested In both days at the museum. I want to survey Bob’s Univac 1218 and Univac 490 to see what is needed to get them lit off. I am pretty sure that Duane is also interested in powering up the Univacs.
Do we have any firm dates or a signup list yet? I have both suggested dates marked on my calendar.
Bill Dromgoole
From: Bill Degnan via vcf-midatlantic Sent: Monday, August 20, 2018 9:05 AM To: vcf-midatlantic Cc: Bill Degnan Subject: Re: [vcf-midatlantic] Interest in a Workshop at System Source,in Hunt Valley, MD?
certainly if possible to have one on both weekends so everyone interested can attend at least one. I can help more with the November workshop but I'd probably go to both at least one day each.
For those of you who don't know, Bob has a private museum with a ton of computer exhibits ranging the entire spectrum of machines. the official web site https://museum.syssrc.com/
I helped Bob organize a workshop in 2014: http://vintagecomputer.net/browse_thread.cfm?id=537 It has been too long since we had a workshop there, I am glad someone is taking the initiative.
Bill
On Mon, Aug 20, 2018 at 7:45 AM Jason Perkins via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
I'd definitely want to come. I'd think the September dates would be better for me, I'm checking to be sure.
On Sun, Aug 19, 2018 at 10:06 PM, J. Alexander Jacocks via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
All,
Since we can't have a workshop at InfoAge, this fall, I propose (along with Bob Roswell) that we have a workshop at Bob's System Source Computer Museum, in Hunt Valley, MD.
I talked to Bob, and he and I are both available on the following dates: September 29th/30th November 10th/11th
We're not yet sure if this will be a 1-day or a 2-day workshop. Please let me know if you are available on either of the dates, and I'll tally the results.
Thanks! - Alex
-- Jason Perkins 313 355 0085
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
OK. I'm sorry for the confusion. I was misinformed. I had no idea. Thank you for elucidating me! On Mon, Aug 27, 2018 at 3:28 PM Bill Degnan via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Bob's place is a museum too, at least a private one. He has UNIVACs there too. b
On Mon, Aug 27, 2018 at 2:17 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Bill Dromgoole,
I think that you may be misunderstanding something. The workshop that Alex is talking about is in Hunt Valley, Maryland, NOT at the VCF museum, NOT at InfoAge.
Jeff
On Sun, Aug 26, 2018 at 4:56 PM Bill Dromgoole via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Yes, I am interested In both days at the museum. I want to survey Bob’s Univac 1218 and Univac 490 to see what is needed to get them lit off. I am pretty sure that Duane is also interested in powering up the Univacs.
Do we have any firm dates or a signup list yet? I have both suggested dates marked on my calendar.
Bill Dromgoole
From: Bill Degnan via vcf-midatlantic Sent: Monday, August 20, 2018 9:05 AM To: vcf-midatlantic Cc: Bill Degnan Subject: Re: [vcf-midatlantic] Interest in a Workshop at System Source,in Hunt Valley, MD?
certainly if possible to have one on both weekends so everyone interested can attend at least one. I can help more with the November workshop but I'd probably go to both at least one day each.
For those of you who don't know, Bob has a private museum with a ton of computer exhibits ranging the entire spectrum of machines. the official web site https://museum.syssrc.com/
I helped Bob organize a workshop in 2014: http://vintagecomputer.net/browse_thread.cfm?id=537 It has been too long since we had a workshop there, I am glad someone is taking the initiative.
Bill
On Mon, Aug 20, 2018 at 7:45 AM Jason Perkins via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
I'd definitely want to come. I'd think the September dates would be better for me, I'm checking to be sure.
On Sun, Aug 19, 2018 at 10:06 PM, J. Alexander Jacocks via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
All,
Since we can't have a workshop at InfoAge, this fall, I propose (along with Bob Roswell) that we have a workshop at Bob's System Source Computer Museum, in Hunt Valley, MD.
I talked to Bob, and he and I are both available on the following dates: September 29th/30th November 10th/11th
We're not yet sure if this will be a 1-day or a 2-day workshop. Please let me know if you are available on either of the dates, and I'll tally the results.
Thanks! - Alex
-- Jason Perkins 313 355 0085
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
Any other interest? So far, I don't think that we have enough folks for either the 29th/30th or the 10th/11th. Here are the current numbers: *September 29th/30th:* 2-4 (Loewen, Hendrickson, Perkins, Jacocks) *November 10th/11th:* 4 (Degnan, Lou, Gesswein, Jacocks) Anyone else? We're getting pretty close to the end-of-September dates, so we're going to have to cancel that one, if nobody else is interested. Thanks! - Alex On Mon, Aug 27, 2018 at 5:21 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
OK. I'm sorry for the confusion. I was misinformed. I had no idea. Thank you for elucidating me!
On Mon, Aug 27, 2018 at 3:28 PM Bill Degnan via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Bob's place is a museum too, at least a private one. He has UNIVACs there too. b
On Mon, Aug 27, 2018 at 2:17 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Bill Dromgoole,
I think that you may be misunderstanding something. The workshop that Alex is talking about is in Hunt Valley, Maryland, NOT at the VCF museum, NOT at InfoAge.
Jeff
On Sun, Aug 26, 2018 at 4:56 PM Bill Dromgoole via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Yes, I am interested In both days at the museum. I want to survey Bob’s Univac 1218 and Univac 490 to see what is needed to get them lit off. I am pretty sure that Duane is also interested in powering up the Univacs.
Do we have any firm dates or a signup list yet? I have both suggested dates marked on my calendar.
Bill Dromgoole
From: Bill Degnan via vcf-midatlantic Sent: Monday, August 20, 2018 9:05 AM To: vcf-midatlantic Cc: Bill Degnan Subject: Re: [vcf-midatlantic] Interest in a Workshop at System Source,in Hunt Valley, MD?
certainly if possible to have one on both weekends so everyone interested can attend at least one. I can help more with the November workshop but I'd probably go to both at least one day each.
For those of you who don't know, Bob has a private museum with a ton of computer exhibits ranging the entire spectrum of machines. the official web site https://museum.syssrc.com/
I helped Bob organize a workshop in 2014: http://vintagecomputer.net/browse_thread.cfm?id=537 It has been too long since we had a workshop there, I am glad someone is taking the initiative.
Bill
On Mon, Aug 20, 2018 at 7:45 AM Jason Perkins via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
I'd definitely want to come. I'd think the September dates would be better for me, I'm checking to be sure.
On Sun, Aug 19, 2018 at 10:06 PM, J. Alexander Jacocks via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
All,
Since we can't have a workshop at InfoAge, this fall, I propose (along with Bob Roswell) that we have a workshop at Bob's System Source Computer Museum, in Hunt Valley, MD.
I talked to Bob, and he and I are both available on the following dates: September 29th/30th November 10th/11th
We're not yet sure if this will be a 1-day or a 2-day workshop. Please let me know if you are available on either of the dates, and I'll tally the results.
Thanks! - Alex
-- Jason Perkins 313 355 0085
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
Hello, I am interested as well but I have to call it closer to event. I think the FSPA Pinball League end of season party is on the 29th for me, and I'm not sure when the MAGFest planning weekend is at the Gaylord National Harbor. Those two things, and Anime USA are potential blockers for me. Note -- I'm not against coming partially, like if Pinball party is Sat eve then I'll head up Sunday morning. Same with MAGCon (I need to find the dates for that.)
Any other interest? So far, I don't think that we have enough folks for either the 29th/30th or the 10th/11th.
Here are the current numbers:
*September 29th/30th:* 2-4 (Loewen, Hendrickson, Perkins, Jacocks) *November 10th/11th:* 4 (Degnan, Lou, Gesswein, Jacocks)
Anyone else? We're getting pretty close to the end-of-September dates, so we're going to have to cancel that one, if nobody else is interested.
Thanks! - Alex
On Mon, Aug 27, 2018 at 5:21 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
OK. I'm sorry for the confusion. I was misinformed. I had no idea. Thank you for elucidating me!
On Mon, Aug 27, 2018 at 3:28 PM Bill Degnan via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Bob's place is a museum too, at least a private one. He has UNIVACs there too. b
On Mon, Aug 27, 2018 at 2:17 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Bill Dromgoole,
I think that you may be misunderstanding something. The workshop that Alex is talking about is in Hunt Valley, Maryland, NOT at the VCF museum, NOT at InfoAge.
Jeff
On Sun, Aug 26, 2018 at 4:56 PM Bill Dromgoole via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Yes, I am interested In both days at the museum. I want to survey Bob’s Univac 1218 and Univac 490 to see what is needed to get them lit off. I am pretty sure that Duane is also interested in powering up the Univacs.
Do we have any firm dates or a signup list yet? I have both suggested dates marked on my calendar.
Bill Dromgoole
From: Bill Degnan via vcf-midatlantic Sent: Monday, August 20, 2018 9:05 AM To: vcf-midatlantic Cc: Bill Degnan Subject: Re: [vcf-midatlantic] Interest in a Workshop at System Source,in Hunt Valley, MD?
certainly if possible to have one on both weekends so everyone interested can attend at least one. I can help more with the November workshop but I'd probably go to both at least one day each.
For those of you who don't know, Bob has a private museum with a ton of computer exhibits ranging the entire spectrum of machines. the official web site https://museum.syssrc.com/
I helped Bob organize a workshop in 2014: http://vintagecomputer.net/browse_thread.cfm?id=537 It has been too long since we had a workshop there, I am glad someone is taking the initiative.
Bill
On Mon, Aug 20, 2018 at 7:45 AM Jason Perkins via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
I'd definitely want to come. I'd think the September dates would be better for me, I'm checking to be sure.
On Sun, Aug 19, 2018 at 10:06 PM, J. Alexander Jacocks via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
> All, > > Since we can't have a workshop at InfoAge, this fall, I propose (along with > Bob Roswell) that we have a workshop at Bob's System Source Computer > Museum, in Hunt Valley, MD. > > I talked to Bob, and he and I are both available on the following dates: > September 29th/30th > November 10th/11th > > We're not yet sure if this will be a 1-day or a 2-day workshop. Please let > me know if you are available on either of the dates, and I'll tally the > results. > > Thanks! > - Alex >
-- Jason Perkins 313 355 0085
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
I am interested in either date . Maybe both. Bill Dromgoole From: J. Alexander Jacocks via vcf-midatlantic Sent: Wednesday, September 12, 2018 9:22 AM To: vcf-midatlantic Cc: J. Alexander Jacocks Subject: Re: [vcf-midatlantic] Interest in a Workshop at System Source,in Hunt Valley, MD? Any other interest? So far, I don't think that we have enough folks for either the 29th/30th or the 10th/11th. Here are the current numbers: *September 29th/30th:* 2-4 (Loewen, Hendrickson, Perkins, Jacocks) *November 10th/11th:* 4 (Degnan, Lou, Gesswein, Jacocks) Anyone else? We're getting pretty close to the end-of-September dates, so we're going to have to cancel that one, if nobody else is interested. Thanks! - Alex On Mon, Aug 27, 2018 at 5:21 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
OK. I'm sorry for the confusion. I was misinformed. I had no idea. Thank you for elucidating me!
On Mon, Aug 27, 2018 at 3:28 PM Bill Degnan via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Bob's place is a museum too, at least a private one. He has UNIVACs there too. b
On Mon, Aug 27, 2018 at 2:17 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Bill Dromgoole,
I think that you may be misunderstanding something. The workshop that Alex is talking about is in Hunt Valley, Maryland, NOT at the VCF museum, NOT at InfoAge.
Jeff
On Sun, Aug 26, 2018 at 4:56 PM Bill Dromgoole via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Yes, I am interested In both days at the museum. I want to survey Bob’s Univac 1218 and Univac 490 to see what is needed to get them lit off. I am pretty sure that Duane is also interested in powering up the Univacs.
Do we have any firm dates or a signup list yet? I have both suggested dates marked on my calendar.
Bill Dromgoole
From: Bill Degnan via vcf-midatlantic Sent: Monday, August 20, 2018 9:05 AM To: vcf-midatlantic Cc: Bill Degnan Subject: Re: [vcf-midatlantic] Interest in a Workshop at System Source,in Hunt Valley, MD?
certainly if possible to have one on both weekends so everyone interested can attend at least one. I can help more with the November workshop but I'd probably go to both at least one day each.
For those of you who don't know, Bob has a private museum with a ton of computer exhibits ranging the entire spectrum of machines. the official web site https://museum.syssrc.com/
I helped Bob organize a workshop in 2014: http://vintagecomputer.net/browse_thread.cfm?id=537 It has been too long since we had a workshop there, I am glad someone is taking the initiative.
Bill
On Mon, Aug 20, 2018 at 7:45 AM Jason Perkins via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
I'd definitely want to come. I'd think the September dates would be better for me, I'm checking to be sure.
On Sun, Aug 19, 2018 at 10:06 PM, J. Alexander Jacocks via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
All,
Since we can't have a workshop at InfoAge, this fall, I propose (along with Bob Roswell) that we have a workshop at Bob's System Source Computer Museum, in Hunt Valley, MD.
I talked to Bob, and he and I are both available on the following dates: September 29th/30th November 10th/11th
We're not yet sure if this will be a 1-day or a 2-day workshop. Please let me know if you are available on either of the dates, and I'll tally the results.
Thanks! - Alex
-- Jason Perkins 313 355 0085
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
participants (6)
-
Bill Degnan -
Bill Dromgoole -
Ethan O'Toole -
Evan Koblentz -
J. Alexander Jacocks -
Jeffrey Brace