Important January Workshop Info
LOCATION: InfoAge Building 9032A - (2201 Marconi Road, Wall Township, NJ) TIME: Start about 10 A.M. on Saturday end whenever. End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning) COST: $10 for all members attending the workshop, which VCF donates to InfoAge as thanks for providing the space for us. EQUIPMENT: VCF will provide a table and you can use any available electrical outlet. Bring your own tools, power strips, power cords and supplies etc. DRINKS: You should bring your own. If anyone has a need to refrigerate their own drinks let me know and we can store it for the weekend in the InfoAge fridge. FOOD: You provide your own. We may order pizza or something where everyone chips in. Usually there is no exact time. We make a decision when everyone gets hungry. PARKING: Park behind the back ramp of 9032A (which is around the building), or in the main parking lot, NOT in the courtyard. Hope to see lots of you there! :-D Jeff Brace
On 1/12/2016 7:09 PM, Jeffrey Brace via vcf-midatlantic wrote:
LOCATION: InfoAge Building 9032A - (2201 Marconi Road, Wall Township, NJ)
TIME: Start about 10 A.M. on Saturday end whenever. End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning)
Hope to see lots of you there! :-D
Jeff Brace
Hi Jeff, I just wanted to double check. The workshop is still the 23rd & 24th, correct? The early instructions had me concerned. Regards, Jeff Galinat
Yes! It is indeed January 23rd and 24th. I just forgot to put the exact date in that message. Sorry about that. On Tue, Jan 12, 2016 at 8:53 PM, Jeff Galinat via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
On 1/12/2016 7:09 PM, Jeffrey Brace via vcf-midatlantic wrote:
LOCATION: InfoAge Building 9032A - (2201 Marconi Road, Wall Township, NJ)
TIME: Start about 10 A.M. on Saturday end whenever. End about 5 P.M. on Sunday. (Starts around 10 A.M. Sunday morning)
Hope to see lots of you there! :-D
Jeff Brace
Hi Jeff, I just wanted to double check. The workshop is still the 23rd & 24th, correct? The early instructions had me concerned. Regards, Jeff Galinat
I apologize if this shows up as a duplicate post. My first post on the subject didn't seem to get posted Hi, I have the following vintage computing items, test equipment and tools available for sale or trade which I can bring to the workshop over the weekend. I have listed my asking prices which I feel are pretty reasonable but you can be the judge. I would also entertain trades for S-100 boards and 8" DS floppy drives. Please contact me if you would like additional info or to make an offer on any item. I wont bring this stuff unless someone wants it. I would prefer not to ship these items if I can avoid it so the workshop attendees are going to get the 1st shot. Anyhow, here is the list: Vector S-100 Protoboards w tinned edge connector $12 S-100 Cromemco ZPU Z-80 CPU - tested with my IMSAI - $90 S-100 Cromemco TU-ART 2 port serial TMS 5501 based -$60 KSR33 Teletype (complete, case has cracks) $200 ASR33 Print Mechanism with paper tape punch $100 $250 for the above pair Franklin ACE 1000 (needs KB rebuild) $50 Franklin ACE 1200 (needs KB rebuild) with ACE-80 Z-80 card & 1 operational drive $80 Atari 400 with 15 cartridges, power supply & joystick tested working $50 Atari 1050 Floppy Disk Drive w/power supply tested - working $30 $70 for the above pair Okidata 120 Printer for Commodore systems (VIC-20,C-64,etc) with power cord, manual & interface cable $5 Apple Color StyleWriter Printer with power supply $5 Apple CD300 external SCSI CD-ROM Drive with 25 to 50 pin cable, terminator & 3 caddies $ 30 CD-Rom caddies 3 for $5 HP ScanJet 6100Cse 8.5 x 14 flatbed SCSI Scanner - New in box $50 HP LaserJet 4Plus tested working $30 HP 54201D 300mhz Digitizing Oscilloscope w/ manual on CD & 3 10271A state probes/triggering pods $100 Tenma Model 21-7935 Temp. Controlled Solder Station - New in Box! $40 Regards, Jeff Galinat
Could you send me pictures of the Franklin Aces? What cartridges do you have with the 400? And I may be interested in the Apple CD ROM drive and extra caddies as well. On Tuesday, January 19, 2016, Jeff Galinat via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
I apologize if this shows up as a duplicate post. My first post on the subject didn't seem to get posted
Hi, I have the following vintage computing items, test equipment and tools available for sale or trade which I can bring to the workshop over the weekend. I have listed my asking prices which I feel are pretty reasonable but you can be the judge. I would also entertain trades for S-100 boards and 8" DS floppy drives.
Please contact me if you would like additional info or to make an offer on any item. I wont bring this stuff unless someone wants it. I would prefer not to ship these items if I can avoid it so the workshop attendees are going to get the 1st shot.
Anyhow, here is the list:
Vector S-100 Protoboards w tinned edge connector $12 S-100 Cromemco ZPU Z-80 CPU - tested with my IMSAI - $90 S-100 Cromemco TU-ART 2 port serial TMS 5501 based -$60
KSR33 Teletype (complete, case has cracks) $200 ASR33 Print Mechanism with paper tape punch $100 $250 for the above pair
Franklin ACE 1000 (needs KB rebuild) $50 Franklin ACE 1200 (needs KB rebuild) with ACE-80 Z-80 card & 1 operational drive $80
Atari 400 with 15 cartridges, power supply & joystick tested working $50 Atari 1050 Floppy Disk Drive w/power supply tested - working $30 $70 for the above pair
Okidata 120 Printer for Commodore systems (VIC-20,C-64,etc) with power cord, manual & interface cable $5
Apple Color StyleWriter Printer with power supply $5
Apple CD300 external SCSI CD-ROM Drive with 25 to 50 pin cable, terminator & 3 caddies $ 30
CD-Rom caddies 3 for $5
HP ScanJet 6100Cse 8.5 x 14 flatbed SCSI Scanner - New in box $50
HP LaserJet 4Plus tested working $30
HP 54201D 300mhz Digitizing Oscilloscope w/ manual on CD & 3 10271A state probes/triggering pods $100
Tenma Model 21-7935 Temp. Controlled Solder Station - New in Box! $40
Regards, Jeff Galinat
-- Normal Person: Hey, it seems that you know a lot. Geek: To be honest, it's due to all the surfing I do. Normal Person: So you go surfing? Normal Person: But I don't think that has anything to do with knowing a lot... Geek: I think that's wrong on a fundamental level. Normal Person: Huh? Huh? What?
Hi, What are you looking for in reference for atrade? S-100 Cromemco ZPU Z-80 CPU - tested with myIMSAI - $90 S-100 Cromemco TU-ART 2 port serial TMS 5501based -$60 Atari 400 with 15 cartridges, power supply &joystick tested working $50 Bobby On Tuesday, January 19, 2016 5:42 PM, Jeff Galinat via vcf-midatlantic <vcf-midatlantic@lists.vintagecomputerfederation.org> wrote: I apologize if this shows up as a duplicate post. My first post on the subject didn't seem to get posted Hi, I have the following vintage computing items, test equipment and tools available for sale or trade which I can bring to the workshop over the weekend. I have listed my asking prices which I feel are pretty reasonable but you can be the judge. I would also entertain trades for S-100 boards and 8" DS floppy drives. Please contact me if you would like additional info or to make an offer on any item. I wont bring this stuff unless someone wants it. I would prefer not to ship these items if I can avoid it so the workshop attendees are going to get the 1st shot. Anyhow, here is the list: Vector S-100 Protoboards w tinned edge connector $12 S-100 Cromemco ZPU Z-80 CPU - tested with my IMSAI - $90 S-100 Cromemco TU-ART 2 port serial TMS 5501 based -$60 KSR33 Teletype (complete, case has cracks) $200 ASR33 Print Mechanism with paper tape punch $100 $250 for the above pair Franklin ACE 1000 (needs KB rebuild) $50 Franklin ACE 1200 (needs KB rebuild) with ACE-80 Z-80 card & 1 operational drive $80 Atari 400 with 15 cartridges, power supply & joystick tested working $50 Atari 1050 Floppy Disk Drive w/power supply tested - working $30 $70 for the above pair Okidata 120 Printer for Commodore systems (VIC-20,C-64,etc) with power cord, manual & interface cable $5 Apple Color StyleWriter Printer with power supply $5 Apple CD300 external SCSI CD-ROM Drive with 25 to 50 pin cable, terminator & 3 caddies $ 30 CD-Rom caddies 3 for $5 HP ScanJet 6100Cse 8.5 x 14 flatbed SCSI Scanner - New in box $50 HP LaserJet 4Plus tested working $30 HP 54201D 300mhz Digitizing Oscilloscope w/ manual on CD & 3 10271A state probes/triggering pods $100 Tenma Model 21-7935 Temp. Controlled Solder Station - New in Box! $40 Regards, Jeff Galinat
Hi, I have the following vintage computing items, test equipment and tools available for sale or trade which I can bring to the workshop over the weekend. I have listed my asking prices which I feel are pretty reasonable but you can be the judge. I would also entertain trades for S-100 boards and 8" DS floppy drives.
Please contact me if you would like additional info or to make an offer on any item. I wont bring this stuff unless someone wants it. I would prefer not to ship these items if I can avoid it so the workshop attendees are going to get the 1st shot.
Anyhow, here is the list:
Franklin ACE 1000 (needs KB rebuild) $50 Franklin ACE 1200 (needs KB rebuild) with ACE-80 Z-80 card & 1 operational drive $80 ................ Tenma Model 21-7935 Temp. Controlled Solder Station - New in Box! $40
Regards, Jeff Galinat
I'd be interested in at least one of the franklins and perhaps the soldering station. Pics would be cool. Thanks, Tony
participants (5)
-
Bob Aviles -
Jeff Galinat -
Jeffrey Brace -
Joseph Oprysko -
Tony Bogan