Feb Repair Workshop - 2019
It seems that the permissions on the signup spreadsheet weren't set correctly. I kept getting requests to get access. The permissions should be fixed now. Please signup for the February 2019 VCF Repair Workshop which will be February 9 & 10. < https://docs.google.com/spreadsheets/d/11Iy1jqPJqVzY1gnGRrHfLfIcx5IQ82QkkaBk...
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
I'm thinking I'll be able to make this workshop. There are some bugs on my Lisa 2/5 I need to sort out. I'll have a few newer PCs with me like I brought to Festivus. Not sure on quantity / specs yet. I'm still thinking about what I want to do for VCF. I might try for a hard drive bearing replacement talk. Does anyone have a junk drive or two with extra noisy bearings they'd want to part with? Something like an old 5.25 506 drive. I need to get some practice in before making a presentation :) Thanks, On Sun, Jan 20, 2019 at 3:16 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
It seems that the permissions on the signup spreadsheet weren't set correctly. I kept getting requests to get access. The permissions should be fixed now. Please signup for the February 2019 VCF Repair Workshop which will be February 9 & 10. <
https://docs.google.com/spreadsheets/d/11Iy1jqPJqVzY1gnGRrHfLfIcx5IQ82QkkaBk...
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
-- Jason Perkins 313 355 0085
On Wed, Jan 30, 2019 at 1:39 PM Jason Perkins <perkins.jason@gmail.com> wrote:
I'm thinking I'll be able to make this workshop. There are some bugs on my Lisa 2/5 I need to sort out.
Great! I hope that you can make it this time. I'll have a few newer PCs with me like I brought to Festivus. Not sure on
quantity / specs yet.
Great! -- ========================================= Jeff Brace Vice President Vintage Computer Federation
I have a noisy 3.5" seagate i left with the SGI at VCF. -andy
On Jan 30, 2019, at 1:38 PM, Jason Perkins via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote:
I'm thinking I'll be able to make this workshop. There are some bugs on my Lisa 2/5 I need to sort out.
I'll have a few newer PCs with me like I brought to Festivus. Not sure on quantity / specs yet.
I'm still thinking about what I want to do for VCF. I might try for a hard drive bearing replacement talk. Does anyone have a junk drive or two with extra noisy bearings they'd want to part with? Something like an old 5.25 506 drive. I need to get some practice in before making a presentation :)
Thanks,
On Sun, Jan 20, 2019 at 3:16 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
It seems that the permissions on the signup spreadsheet weren't set correctly. I kept getting requests to get access. The permissions should be fixed now. Please signup for the February 2019 VCF Repair Workshop which will be February 9 & 10. <
https://docs.google.com/spreadsheets/d/11Iy1jqPJqVzY1gnGRrHfLfIcx5IQ82QkkaBk...
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
-- Jason Perkins 313 355 0085
Tony If you are coming to workshop, Would you have the hardware and software to test an apple II Board to see if it works I was told it is a Z80 board to run CP/m Thanks Mike R. Sent from: My extremely complicated, hand held electronic device.
On Jan 31, 2019, at 3:11 PM, andy diller via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote:
I have a noisy 3.5" seagate i left with the SGI at VCF.
-andy
On Jan 30, 2019, at 1:38 PM, Jason Perkins via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote:
I'm thinking I'll be able to make this workshop. There are some bugs on my Lisa 2/5 I need to sort out.
I'll have a few newer PCs with me like I brought to Festivus. Not sure on quantity / specs yet.
I'm still thinking about what I want to do for VCF. I might try for a hard drive bearing replacement talk. Does anyone have a junk drive or two with extra noisy bearings they'd want to part with? Something like an old 5.25 506 drive. I need to get some practice in before making a presentation :)
Thanks,
On Sun, Jan 20, 2019 at 3:16 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
It seems that the permissions on the signup spreadsheet weren't set correctly. I kept getting requests to get access. The permissions should be fixed now. Please signup for the February 2019 VCF Repair Workshop which will be February 9 & 10. <
https://docs.google.com/spreadsheets/d/11Iy1jqPJqVzY1gnGRrHfLfIcx5IQ82QkkaBk...
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
-- Jason Perkins 313 355 0085
What is the full timeline for this event. Do the on-site overnight accommodations start on Friday evening, or is it strictly a Saturday night only thing? On Sun, Jan 20, 2019 at 3:16 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
It seems that the permissions on the signup spreadsheet weren't set correctly. I kept getting requests to get access. The permissions should be fixed now. Please signup for the February 2019 VCF Repair Workshop which will be February 9 & 10. <
https://docs.google.com/spreadsheets/d/11Iy1jqPJqVzY1gnGRrHfLfIcx5IQ82QkkaBk...
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
What is the full timeline for this event. Do the on-site overnight accommodations start on Friday evening, or is it strictly a Saturday night only thing?
Saturday night only. Starts around 10am Saturday or when me/Brace arrive, whichever comes first. On Mon, Feb 4, 2019, 7:13 AM Jeff Salzman via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org wrote:
What is the full timeline for this event. Do the on-site overnight accommodations start on Friday evening, or is it strictly a Saturday night only thing?
On Sun, Jan 20, 2019 at 3:16 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
It seems that the permissions on the signup spreadsheet weren't set correctly. I kept getting requests to get access. The permissions should be fixed now. Please signup for the February 2019 VCF Repair Workshop which will be February 9 & 10. <
https://docs.google.com/spreadsheets/d/11Iy1jqPJqVzY1gnGRrHfLfIcx5IQ82QkkaBk...
-- ========================================= Jeff Brace Vice President Vintage Computer Federation
participants (6)
-
dillera@gmail.com -
Evan Koblentz -
Jason Perkins -
Jeffrey Brace -
jsalzman@gmail.com -
Sentrytv