Re: [vcf-midatlantic] Museum report - 12/16/18
Again? This isn't getting through. On 12/17/2018 12:28 PM, Douglas Crawford wrote:
Great day at the museum. Visitor flow was non stop in the afternoon. I am grateful for the assistance of Chris and Tony, with their help we cycled through the visitors and gave everyone good attention. Its fun to docent in teams!
The museum looked sharp and with Tony's help we had most everything running that is demo-able.
Yes it did, saw the first email from this morning and then this one, just not the original you sent after Sunday at the museum. Tony Sent from my iPhone
On Dec 19, 2018, at 1:59 PM, Douglas Crawford via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote:
Again? This isn't getting through.
On 12/17/2018 12:28 PM, Douglas Crawford wrote: Great day at the museum. Visitor flow was non stop in the afternoon. I am grateful for the assistance of Chris and Tony, with their help we cycled through the visitors and gave everyone good attention. Its fun to docent in teams!
The museum looked sharp and with Tony's help we had most everything running that is demo-able.
CDL is the custodian of an Daniels DMC WA22P Indent Pneumatic Crimp Tool with the dies for D connector pins (we are looking for dies for thick and thin net if you know of any) <https://rover.ebay.com/rover/0/e11401.m1842.l5919/7?euid=e7e07c7e8ade42578c489ecac6edd6e3&bu=43151336304&segname=11401&crd=20200626084448&osub=-1~1&ch=osgood&loc=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fvod%3Fitemid%3D193342236948%26transid%3D1748192042009%26qu%3D1&sojTags=bu=bu,ch=ch,segname=segname,crd=crd,url=loc,osub=osub> So if you need to make up serial or AUI cables, this the real deal! <https://rover.ebay.com/rover/0/e11401.m1842.l5919/7?euid=e7e07c7e8ade42578c489ecac6edd6e3&bu=43151336304&segname=11401&crd=20200626084448&osub=-1~1&ch=osgood&loc=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fvod%3Fitemid%3D193342236948%26transid%3D1748192042009%26qu%3D1&sojTags=bu=bu,ch=ch,segname=segname,crd=crd,url=loc,osub=osub>
Awesome Martin! A very useful tool! On Fri, Jun 26, 2020 at 6:53 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
CDL is the custodian of an Daniels DMC WA22P Indent Pneumatic Crimp Tool with the dies for D connector pins (we are looking for dies for thick and thin net if you know of any) < https://rover.ebay.com/rover/0/e11401.m1842.l5919/7?euid=e7e07c7e8ade42578c4...
So if you need to make up serial or AUI cables, this the real deal!
-- ========================================= Jeff Brace Vice President & Board Member, VCF East Showrunner Vintage Computer Federation http://www.vcfed.org/ jeffrey@vcfed.org
If it weren't for the slight difference in pin spacing, that would be useful for making Commodore SX-64 keyboard cables. On Fri, Jun 26, 2020, 10:33 PM Jeffrey Brace via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Awesome Martin! A very useful tool!
On Fri, Jun 26, 2020 at 6:53 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
CDL is the custodian of an Daniels DMC WA22P Indent Pneumatic Crimp Tool with the dies for D connector pins (we are looking for dies for thick and thin net if you know of any) <
https://rover.ebay.com/rover/0/e11401.m1842.l5919/7?euid=e7e07c7e8ade42578c4...
So if you need to make up serial or AUI cables, this the real deal!
<
https://rover.ebay.com/rover/0/e11401.m1842.l5919/7?euid=e7e07c7e8ade42578c4...
-- ========================================= Jeff Brace Vice President & Board Member, VCF East Showrunner Vintage Computer Federation http://www.vcfed.org/ jeffrey@vcfed.org
My thoughts exactly Jeffrey. It's a superb tool ! Keith
Awesome Martin! A very useful tool!
On Fri, Jun 26, 2020 at 6:53 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
CDL is the custodian of an Daniels DMC WA22P Indent Pneumatic Crimp Tool with the dies for D connector pins (we are looking for dies for thick and thin net if you know of any) < https://rover.ebay.com/rover/0/e11401.m1842.l5919/7?euid=e7e07c7e8ade42578c4...
So if you need to make up serial or AUI cables, this the real deal!
Was point out privately that the link would not work, so here's a link to an image on the CDL server: http://compdecon.org/wp-content/uploads/2020/06/wa22p.jpg As close to production quality gear as we can afford for making repro cables. On 6/27/2020 2:51 PM, Keith Anderson via vcf-midatlantic wrote:
My thoughts exactly Jeffrey. It's a superb tool ! Keith
Awesome Martin! A very useful tool! On Fri, Jun 26, 2020 at 6:53 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
CDL is the custodian of an Daniels DMC WA22P Indent Pneumatic Crimp Tool with the dies for D connector pins (we are looking for dies for thick and thin net if you know of any)
I would love to learn how to use this! Chris On Sat, Jun 27, 2020 at 5:44 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Was point out privately that the link would not work, so here's a link to an image on the CDL server: http://compdecon.org/wp-content/uploads/2020/06/wa22p.jpg
As close to production quality gear as we can afford for making repro cables.
On 6/27/2020 2:51 PM, Keith Anderson via vcf-midatlantic wrote:
My thoughts exactly Jeffrey. It's a superb tool ! Keith
Awesome Martin! A very useful tool! On Fri, Jun 26, 2020 at 6:53 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
CDL is the custodian of an Daniels DMC WA22P Indent Pneumatic Crimp Tool with the dies for D connector pins (we are looking for dies for thick and thin net if you know of any)
Yeah I'm seriously drooling here. Do you have any idea of how much those little buggers cost new?! -Dave On June 27, 2020 5:58:48 PM Chris Fala via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote:
I would love to learn how to use this!
Chris
On Sat, Jun 27, 2020 at 5:44 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Was point out privately that the link would not work, so here's a link to an image on the CDL server: http://compdecon.org/wp-content/uploads/2020/06/wa22p.jpg
As close to production quality gear as we can afford for making repro cables.
On 6/27/2020 2:51 PM, Keith Anderson via vcf-midatlantic wrote:
My thoughts exactly Jeffrey. It's a superb tool ! Keith
Awesome Martin! A very useful tool! On Fri, Jun 26, 2020 at 6:53 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
CDL is the custodian of an Daniels DMC WA22P Indent Pneumatic Crimp Tool with the dies for D connector pins (we are looking for dies for thick and thin net if you know of any)
-- Dave McGuire, AK4HZ New Kensington, PA
David, Way more then I could afford, so we are happy to have used! Will work out the details with Jeff Brace to make it available at VCF workshops if requested. Martin On 6/27/2020 6:26 PM, Dave McGuire via vcf-midatlantic wrote:
Yeah I'm seriously drooling here. Do you have any idea of how much those little buggers cost new?!
-Dave
On June 27, 2020 5:58:48 PM Chris Fala via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote:
I would love to learn how to use this!
Chris
On Sat, Jun 27, 2020 at 5:44 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Was pointed out privately that the link would not work, so here's a link to an image on the CDL server: http://compdecon.org/wp-content/uploads/2020/06/wa22p.jpg
As close to production quality gear as we can afford for making repro cables.
On 6/27/2020 2:51 PM, Keith Anderson via vcf-midatlantic wrote:
My thoughts exactly Jeffrey. It's a superb tool ! Keith
Awesome Martin! A very useful tool! On Fri, Jun 26, 2020 at 6:53 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
CDL is the custodian of an Daniels DMC WA22P Indent Pneumatic Crimp Tool
Chris, I will be using the CNC to make a tabletop bracket to hold the WA22P, we already have the air solenoid, knee switch, and timer relay. Once that's out of the way, we can coordinate to set up a session at one of the VCF workshops for user training. Martin On 6/27/2020 5:58 PM, Chris Fala wrote:
I would love to learn how to use this!
Chris
On Sat, Jun 27, 2020 at 5:44 PM Martin Flynn via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org <mailto:vcf-midatlantic@lists.vcfed.org>> wrote:
Was point out privately that the link would not work, so here's a link to an image on the CDL server: http://compdecon.org/wp-content/uploads/2020/06/wa22p.jpg
As close to production quality gear as we can afford for making repro cables.
On 6/27/2020 2:51 PM, Keith Anderson via vcf-midatlantic wrote: > My thoughts exactly Jeffrey. It's a superb tool ! > Keith > >> Awesome Martin! A very useful tool! >> On Fri, Jun 26, 2020 at 6:53 PM Martin Flynn via vcf-midatlantic < >> vcf-midatlantic@lists.vcfed.org <mailto:vcf-midatlantic@lists.vcfed.org>> wrote: >>> CDL is the custodian of an Daniels DMC WA22P Indent Pneumatic Crimp Tool >>> with the dies for D connector pins (we are looking for dies for thick >>> and thin net if you know of any)
Sounds great! On Sun, Jun 28, 2020 at 9:45 AM Martin Flynn <maflynn@theflynn.org> wrote:
Chris,
I will be using the CNC to make a tabletop bracket to hold the WA22P, we already have the air solenoid, knee switch, and timer relay. Once that's out of the way, we can coordinate to set up a session at one of the VCF workshops for user training.
Martin On 6/27/2020 5:58 PM, Chris Fala wrote:
I would love to learn how to use this!
Chris
On Sat, Jun 27, 2020 at 5:44 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Was point out privately that the link would not work, so here's a link to an image on the CDL server: http://compdecon.org/wp-content/uploads/2020/06/wa22p.jpg
As close to production quality gear as we can afford for making repro cables.
On 6/27/2020 2:51 PM, Keith Anderson via vcf-midatlantic wrote:
My thoughts exactly Jeffrey. It's a superb tool ! Keith
Awesome Martin! A very useful tool! On Fri, Jun 26, 2020 at 6:53 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
CDL is the custodian of an Daniels DMC WA22P Indent Pneumatic Crimp Tool with the dies for D connector pins (we are looking for dies for thick and thin net if you know of any)
Update: The factory tool holder is cheaper then I can make one! https://www.dmctools.com/oscar/catalogue/bm-2a_315/ On 6/28/2020 9:45 AM, Martin Flynn wrote:
Chris,
I will be using the CNC to make a tabletop bracket to hold the WA22P, we already have the air solenoid, knee switch, and timer relay. Once that's out of the way, we can coordinate to set up a session at one of the VCF workshops for user training.
Martin
On 6/27/2020 5:58 PM, Chris Fala wrote:
I would love to learn how to use this!
Chris
On Sat, Jun 27, 2020 at 5:44 PM Martin Flynn via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org <mailto:vcf-midatlantic@lists.vcfed.org>> wrote:
Was point out privately that the link would not work, so here's a link to an image on the CDL server: http://compdecon.org/wp-content/uploads/2020/06/wa22p.jpg
As close to production quality gear as we can afford for making repro cables.
On 6/27/2020 2:51 PM, Keith Anderson via vcf-midatlantic wrote: > My thoughts exactly Jeffrey. It's a superb tool ! > Keith > >> Awesome Martin! A very useful tool! >> On Fri, Jun 26, 2020 at 6:53 PM Martin Flynn via vcf-midatlantic < >> vcf-midatlantic@lists.vcfed.org <mailto:vcf-midatlantic@lists.vcfed.org>> wrote: >>> CDL is the custodian of an Daniels DMC WA22P Indent Pneumatic Crimp Tool >>> with the dies for D connector pins (we are looking for dies for thick >>> and thin net if you know of any)
participants (8)
-
Chris Fala -
Dave McGuire -
Douglas Crawford -
Jeffrey Brace -
jsalzman＠gmail.com -
Keith Anderson -
Martin Flynn -
Tony Bogan