9000/300 available (fwd)
This was forwarded from a Vintage HP list. If anyone wants a mid-'80s HP/UX system, please contact the original poster (adam.raub@simco.com). The systems appears to be in Allentown, PA. Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/Oldtech/ ---------- Forwarded message ---------- Date: Wed, 22 Nov 2017 06:43:12 -0800 Reply-To: VintHPcom@groups.io To: VintHPcom@groups.io Subject: [VintHPcom] 9000/300 available I received his email today. If anyone is interested please contact Adam directly. David Collins _____________________________ Hello, We currently have a HP 9000/300 series computer that we are going to scrap. Would you be interested or know someone who may want it? We have a monitor, a few keyboards, cables & a few boxes of disks for it along with extra hard drives. Adam Raub Technician Simco Electronics Allentown, PA 18103 ( x-apple-data-detectors://1/0 ) Phone: (610)798-0100 Ext. 4248 adam.raub@simco.com ( tel:(610)798-0100;4248 )
All, I contacted Adam, and he’s looking for an offer on a ton of gear. If folks are interested, I’d be happy to pick this stuff up, and bring it to Festivus. I’ll attach the picture, here, but there are at least 4 system units, along with a bunch of external drives. Does the museum have a complete 9000/300 system? Thanks! - Alex [image: JPEG image] 3.JPG <https://drive.google.com/open?id=0B-2zX59EiBR0SmY3enF5T1BrUm1DRGpQdjdaVkFGd2JQbkZB> On Wed, Nov 22, 2017 at 09:58 Mike Loewen via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
This was forwarded from a Vintage HP list. If anyone wants a mid-'80s HP/UX system, please contact the original poster (adam.raub@simco.com). The systems appears to be in Allentown, PA.
Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/Oldtech/
---------- Forwarded message ---------- Date: Wed, 22 Nov 2017 06:43:12 -0800 Reply-To: VintHPcom@groups.io To: VintHPcom@groups.io Subject: [VintHPcom] 9000/300 available
I received his email today. If anyone is interested please contact Adam directly.
David Collins
_____________________________
Hello,
We currently have a HP 9000/300 series computer that we are going to scrap. Would you be interested or know someone who may want it? We have a monitor, a few keyboards, cables & a few boxes of disks for it along with extra hard drives.
Adam Raub
Technician
Simco Electronics
Allentown, PA 18103 ( x-apple-data-detectors://1/0 )
Phone: (610)798-0100 Ext. 4248 adam.raub@simco.com ( tel:(610)798-0100;4248 )
Did he mention what software came with it/do you know. Is there a GUI called "New Wave" included on disk or CD? Bill Degnan twitter: billdeg vintagecomputer.net On Nov 25, 2017 9:04 AM, "J. Alexander Jacocks via vcf-midatlantic" < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
All,
I contacted Adam, and he’s looking for an offer on a ton of gear. If folks are interested, I’d be happy to pick this stuff up, and bring it to Festivus. I’ll attach the picture, here, but there are at least 4 system units, along with a bunch of external drives.
Does the museum have a complete 9000/300 system?
Thanks! - Alex
[image: JPEG image] 3.JPG <https://drive.google.com/open?id=0B-2zX59EiBR0SmY3enF5T1BrUm1DRGpQ djdaVkFGd2JQbkZB>
On Wed, Nov 22, 2017 at 09:58 Mike Loewen via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
This was forwarded from a Vintage HP list. If anyone wants a
mid-'80s
HP/UX system, please contact the original poster (adam.raub@simco.com). The systems appears to be in Allentown, PA.
Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/Oldtech/
---------- Forwarded message ---------- Date: Wed, 22 Nov 2017 06:43:12 -0800 Reply-To: VintHPcom@groups.io To: VintHPcom@groups.io Subject: [VintHPcom] 9000/300 available
I received his email today. If anyone is interested please contact Adam directly.
David Collins
_____________________________
Hello,
We currently have a HP 9000/300 series computer that we are going to scrap. Would you be interested or know someone who may want it? We have a monitor, a few keyboards, cables & a few boxes of disks for it along with extra hard drives.
Adam Raub
Technician
Simco Electronics
Allentown, PA 18103 ( x-apple-data-detectors://1/0 )
Phone: (610)798-0100 Ext. 4248 adam.raub@simco.com ( tel:(610)798-0100;4248 )
Does the museum have a complete 9000/300 system?
Nope On Nov 25, 2017 9:04 AM, "J. Alexander Jacocks via vcf-midatlantic" < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
All,
I contacted Adam, and he’s looking for an offer on a ton of gear. If folks are interested, I’d be happy to pick this stuff up, and bring it to Festivus. I’ll attach the picture, here, but there are at least 4 system units, along with a bunch of external drives.
Does the museum have a complete 9000/300 system?
Thanks! - Alex
[image: JPEG image] 3.JPG <https://drive.google.com/open?id=0B-2zX59EiBR0SmY3enF5T1BrUm1DRGpQ djdaVkFGd2JQbkZB>
On Wed, Nov 22, 2017 at 09:58 Mike Loewen via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
This was forwarded from a Vintage HP list. If anyone wants a
mid-'80s
HP/UX system, please contact the original poster (adam.raub@simco.com). The systems appears to be in Allentown, PA.
Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/Oldtech/
---------- Forwarded message ---------- Date: Wed, 22 Nov 2017 06:43:12 -0800 Reply-To: VintHPcom@groups.io To: VintHPcom@groups.io Subject: [VintHPcom] 9000/300 available
I received his email today. If anyone is interested please contact Adam directly.
David Collins
_____________________________
Hello,
We currently have a HP 9000/300 series computer that we are going to scrap. Would you be interested or know someone who may want it? We have a monitor, a few keyboards, cables & a few boxes of disks for it along with extra hard drives.
Adam Raub
Technician
Simco Electronics
Allentown, PA 18103 ( x-apple-data-detectors://1/0 )
Phone: (610)798-0100 Ext. 4248 adam.raub@simco.com ( tel:(610)798-0100;4248 )
If you move on this, please do me a favor. Simco is (primarily) an instrument calibration company, and they had these because many high-end HP instruments use HP9000-300 series systems to run their calibration/verification software. These instruments are still dominant in the industry, but some of the companies like Simco who calibrate them are starting to discontinue their services because they're afraid to wrangle these non-Windows machines that are needed to run that software. Most of the software I'm talking about is pretty readily available, but some is not. If you should happen to get ahold of any floppies with this pile of stuff, and if they look test-equipment-related, would you please let me know? Also, I could really use one or more of those floppy disk subsystems if any are going spare. Thanks, -Dave On 11/25/2017 09:03 AM, J. Alexander Jacocks via vcf-midatlantic wrote:
I contacted Adam, and he’s looking for an offer on a ton of gear. If folks are interested, I’d be happy to pick this stuff up, and bring it to Festivus. I’ll attach the picture, here, but there are at least 4 system units, along with a bunch of external drives.
Does the museum have a complete 9000/300 system?
Thanks! - Alex
[image: JPEG image] 3.JPG <https://drive.google.com/open?id=0B-2zX59EiBR0SmY3enF5T1BrUm1DRGpQdjdaVkFGd2JQbkZB>
On Wed, Nov 22, 2017 at 09:58 Mike Loewen via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
This was forwarded from a Vintage HP list. If anyone wants a mid-'80s HP/UX system, please contact the original poster (adam.raub@simco.com). The systems appears to be in Allentown, PA.
Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/Oldtech/
---------- Forwarded message ---------- Date: Wed, 22 Nov 2017 06:43:12 -0800 Reply-To: VintHPcom@groups.io To: VintHPcom@groups.io Subject: [VintHPcom] 9000/300 available
I received his email today. If anyone is interested please contact Adam directly.
David Collins
_____________________________
Hello,
We currently have a HP 9000/300 series computer that we are going to scrap. Would you be interested or know someone who may want it? We have a monitor, a few keyboards, cables & a few boxes of disks for it along with extra hard drives.
Adam Raub
Technician
Simco Electronics
Allentown, PA 18103 ( x-apple-data-detectors://1/0 )
Phone: (610)798-0100 Ext. 4248 adam.raub@simco.com ( tel:(610)798-0100;4248 )
-- Dave McGuire, AK4HZ New Kensington, PA
Dave, Will do. I'm trying to work out a reasonable price for the lot, but assuming I do, I'll try to get all the software possible. - Alex On Sat, Nov 25, 2017 at 10:46 AM, Dave McGuire via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
If you move on this, please do me a favor. Simco is (primarily) an instrument calibration company, and they had these because many high-end HP instruments use HP9000-300 series systems to run their calibration/verification software. These instruments are still dominant in the industry, but some of the companies like Simco who calibrate them are starting to discontinue their services because they're afraid to wrangle these non-Windows machines that are needed to run that software.
Most of the software I'm talking about is pretty readily available, but some is not. If you should happen to get ahold of any floppies with this pile of stuff, and if they look test-equipment-related, would you please let me know?
Also, I could really use one or more of those floppy disk subsystems if any are going spare.
Thanks, -Dave
On 11/25/2017 09:03 AM, J. Alexander Jacocks via vcf-midatlantic wrote:
I contacted Adam, and he’s looking for an offer on a ton of gear. If folks are interested, I’d be happy to pick this stuff up, and bring it to Festivus. I’ll attach the picture, here, but there are at least 4 system units, along with a bunch of external drives.
Does the museum have a complete 9000/300 system?
Thanks! - Alex
[image: JPEG image] 3.JPG <https://drive.google.com/open?id=0B-2zX59EiBR0SmY3enF5T1BrUm1DRGpQ djdaVkFGd2JQbkZB>
On Wed, Nov 22, 2017 at 09:58 Mike Loewen via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
This was forwarded from a Vintage HP list. If anyone wants a
mid-'80s
HP/UX system, please contact the original poster (adam.raub@simco.com). The systems appears to be in Allentown, PA.
Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/ Oldtech/
---------- Forwarded message ---------- Date: Wed, 22 Nov 2017 06:43:12 -0800 Reply-To: VintHPcom@groups.io To: VintHPcom@groups.io Subject: [VintHPcom] 9000/300 available
I received his email today. If anyone is interested please contact Adam directly.
David Collins
_____________________________
Hello,
We currently have a HP 9000/300 series computer that we are going to scrap. Would you be interested or know someone who may want it? We have a monitor, a few keyboards, cables & a few boxes of disks for it along with extra hard drives.
Adam Raub
Technician
Simco Electronics
Allentown, PA 18103 ( x-apple-data-detectors://1/0 )
Phone: (610)798-0100 Ext. 4248 adam.raub@simco.com ( tel:(610)798-0100;4248 )
-- Dave McGuire, AK4HZ New Kensington, PA
Ok. If you do end up grabbing the whole lot, I'd definitely help you pay for it for some of that mass storage. It might be worth mentioning that you do in fact have an interest in the calibration/verification software that they were running on this. Their management may not understand that (for example) the HP 8566 spectrum analyzer, introduced in the 1970s and discontinued around 2000, is still the cornerstone of laboratory microwave spectrum analysis and high-end EMC work because nothing else can touch its capabilities. They just know "IT'S OLD!!", hence the discontinuance of their calibration services for that instrument. -Dave On 11/27/2017 01:55 PM, J. Alexander Jacocks via vcf-midatlantic wrote:
Dave,
Will do. I'm trying to work out a reasonable price for the lot, but assuming I do, I'll try to get all the software possible.
- Alex
On Sat, Nov 25, 2017 at 10:46 AM, Dave McGuire via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
If you move on this, please do me a favor. Simco is (primarily) an instrument calibration company, and they had these because many high-end HP instruments use HP9000-300 series systems to run their calibration/verification software. These instruments are still dominant in the industry, but some of the companies like Simco who calibrate them are starting to discontinue their services because they're afraid to wrangle these non-Windows machines that are needed to run that software.
Most of the software I'm talking about is pretty readily available, but some is not. If you should happen to get ahold of any floppies with this pile of stuff, and if they look test-equipment-related, would you please let me know?
Also, I could really use one or more of those floppy disk subsystems if any are going spare.
Thanks, -Dave
On 11/25/2017 09:03 AM, J. Alexander Jacocks via vcf-midatlantic wrote:
I contacted Adam, and he’s looking for an offer on a ton of gear. If folks are interested, I’d be happy to pick this stuff up, and bring it to Festivus. I’ll attach the picture, here, but there are at least 4 system units, along with a bunch of external drives.
Does the museum have a complete 9000/300 system?
Thanks! - Alex
[image: JPEG image] 3.JPG <https://drive.google.com/open?id=0B-2zX59EiBR0SmY3enF5T1BrUm1DRGpQ djdaVkFGd2JQbkZB>
On Wed, Nov 22, 2017 at 09:58 Mike Loewen via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
This was forwarded from a Vintage HP list. If anyone wants a
mid-'80s
HP/UX system, please contact the original poster (adam.raub@simco.com). The systems appears to be in Allentown, PA.
Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/ Oldtech/
---------- Forwarded message ---------- Date: Wed, 22 Nov 2017 06:43:12 -0800 Reply-To: VintHPcom@groups.io To: VintHPcom@groups.io Subject: [VintHPcom] 9000/300 available
I received his email today. If anyone is interested please contact Adam directly.
David Collins
_____________________________
Hello,
We currently have a HP 9000/300 series computer that we are going to scrap. Would you be interested or know someone who may want it? We have a monitor, a few keyboards, cables & a few boxes of disks for it along with extra hard drives.
Adam Raub
Technician
Simco Electronics
Allentown, PA 18103 ( x-apple-data-detectors://1/0 )
Phone: (610)798-0100 Ext. 4248 adam.raub@simco.com ( tel:(610)798-0100;4248 )
-- Dave McGuire, AK4HZ New Kensington, PA
-- Dave McGuire, AK4HZ New Kensington, PA
I’d love any extra 9000/300 PSUs, mine does not have one. Sent from my iPhone
On Nov 27, 2017, at 11:01, Dave McGuire via vcf-midatlantic <vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Ok. If you do end up grabbing the whole lot, I'd definitely help you pay for it for some of that mass storage.
It might be worth mentioning that you do in fact have an interest in the calibration/verification software that they were running on this.
Their management may not understand that (for example) the HP 8566 spectrum analyzer, introduced in the 1970s and discontinued around 2000, is still the cornerstone of laboratory microwave spectrum analysis and high-end EMC work because nothing else can touch its capabilities. They just know "IT'S OLD!!", hence the discontinuance of their calibration services for that instrument.
-Dave
On 11/27/2017 01:55 PM, J. Alexander Jacocks via vcf-midatlantic wrote: Dave,
Will do. I'm trying to work out a reasonable price for the lot, but assuming I do, I'll try to get all the software possible.
- Alex
On Sat, Nov 25, 2017 at 10:46 AM, Dave McGuire via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
If you move on this, please do me a favor. Simco is (primarily) an instrument calibration company, and they had these because many high-end HP instruments use HP9000-300 series systems to run their calibration/verification software. These instruments are still dominant in the industry, but some of the companies like Simco who calibrate them are starting to discontinue their services because they're afraid to wrangle these non-Windows machines that are needed to run that software.
Most of the software I'm talking about is pretty readily available, but some is not. If you should happen to get ahold of any floppies with this pile of stuff, and if they look test-equipment-related, would you please let me know?
Also, I could really use one or more of those floppy disk subsystems if any are going spare.
Thanks, -Dave
On 11/25/2017 09:03 AM, J. Alexander Jacocks via vcf-midatlantic wrote: I contacted Adam, and he’s looking for an offer on a ton of gear. If folks are interested, I’d be happy to pick this stuff up, and bring it to Festivus. I’ll attach the picture, here, but there are at least 4 system units, along with a bunch of external drives.
Does the museum have a complete 9000/300 system?
Thanks! - Alex
[image: JPEG image] 3.JPG <https://drive.google.com/open?id=0B-2zX59EiBR0SmY3enF5T1BrUm1DRGpQ djdaVkFGd2JQbkZB>
On Wed, Nov 22, 2017 at 09:58 Mike Loewen via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
This was forwarded from a Vintage HP list. If anyone wants a
mid-'80s
HP/UX system, please contact the original poster (adam.raub@simco.com). The systems appears to be in Allentown, PA.
Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/ Oldtech/
---------- Forwarded message ---------- Date: Wed, 22 Nov 2017 06:43:12 -0800 Reply-To: VintHPcom@groups.io To: VintHPcom@groups.io Subject: [VintHPcom] 9000/300 available
I received his email today. If anyone is interested please contact Adam directly.
David Collins
_____________________________
Hello,
We currently have a HP 9000/300 series computer that we are going to scrap. Would you be interested or know someone who may want it? We have a monitor, a few keyboards, cables & a few boxes of disks for it along with extra hard drives.
Adam Raub
Technician
Simco Electronics
Allentown, PA 18103 ( x-apple-data-detectors://1/0 )
Phone: (610)798-0100 Ext. 4248 adam.raub@simco.com ( tel:(610)798-0100;4248 )
-- Dave McGuire, AK4HZ New Kensington, PA
-- Dave McGuire, AK4HZ New Kensington, PA
Dave, If you have time, give me a call. I got a bunch of software. Like calibration-related. - Alex 240-447-5974 On Mon, Nov 27, 2017 at 2:01 PM Dave McGuire via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Ok. If you do end up grabbing the whole lot, I'd definitely help you pay for it for some of that mass storage.
It might be worth mentioning that you do in fact have an interest in the calibration/verification software that they were running on this.
Their management may not understand that (for example) the HP 8566 spectrum analyzer, introduced in the 1970s and discontinued around 2000, is still the cornerstone of laboratory microwave spectrum analysis and high-end EMC work because nothing else can touch its capabilities. They just know "IT'S OLD!!", hence the discontinuance of their calibration services for that instrument.
-Dave
On 11/27/2017 01:55 PM, J. Alexander Jacocks via vcf-midatlantic wrote:
Dave,
Will do. I'm trying to work out a reasonable price for the lot, but assuming I do, I'll try to get all the software possible.
- Alex
On Sat, Nov 25, 2017 at 10:46 AM, Dave McGuire via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
If you move on this, please do me a favor. Simco is (primarily) an instrument calibration company, and they had these because many high-end HP instruments use HP9000-300 series systems to run their calibration/verification software. These instruments are still dominant in the industry, but some of the companies like Simco who calibrate them are starting to discontinue their services because they're afraid to wrangle these non-Windows machines that are needed to run that software.
Most of the software I'm talking about is pretty readily available, but some is not. If you should happen to get ahold of any floppies with this pile of stuff, and if they look test-equipment-related, would you please let me know?
Also, I could really use one or more of those floppy disk subsystems if any are going spare.
Thanks, -Dave
On 11/25/2017 09:03 AM, J. Alexander Jacocks via vcf-midatlantic wrote:
I contacted Adam, and he’s looking for an offer on a ton of gear. If folks are interested, I’d be happy to pick this stuff up, and bring it to Festivus. I’ll attach the picture, here, but there are at least 4
system
units, along with a bunch of external drives.
Does the museum have a complete 9000/300 system?
Thanks! - Alex
[image: JPEG image] 3.JPG <https://drive.google.com/open?id=0B-2zX59EiBR0SmY3enF5T1BrUm1DRGpQ djdaVkFGd2JQbkZB>
On Wed, Nov 22, 2017 at 09:58 Mike Loewen via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
This was forwarded from a Vintage HP list. If anyone wants a
mid-'80s
HP/UX system, please contact the original poster (adam.raub@simco.com ). The systems appears to be in Allentown, PA.
Mike Loewen mloewen@cpumagic.scol.pa.us Old Technology http://q7.neurotica.com/ Oldtech/
---------- Forwarded message ---------- Date: Wed, 22 Nov 2017 06:43:12 -0800 Reply-To: VintHPcom@groups.io To: VintHPcom@groups.io Subject: [VintHPcom] 9000/300 available
I received his email today. If anyone is interested please contact Adam directly.
David Collins
_____________________________
Hello,
We currently have a HP 9000/300 series computer that we are going to scrap. Would you be interested or know someone who may want it? We have a monitor, a few keyboards, cables & a few boxes of disks for it along with extra hard drives.
Adam Raub
Technician
Simco Electronics
Allentown, PA 18103 ( x-apple-data-detectors://1/0 )
Phone: (610)798-0100 Ext. 4248 adam.raub@simco.com ( tel:(610)798-0100;4248 )
-- Dave McGuire, AK4HZ New Kensington, PA
-- Dave McGuire, AK4HZ New Kensington, PA
participants (6)
-
Cory Smelosky -
Dave McGuire -
Evan Koblentz -
J. Alexander Jacocks -
Mike Loewen -
william degnan