PDP 11/35 in Mahwah NJ on EBay
Not what I collect, but some may be interested. I can probably arrange pickup and short term storage if needed. http://www.ebay.com/itm/191737673720 Kelly
On Fri, Nov 13, 2015 at 1:43 PM, Kelly Leavitt via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Not what I collect, but some may be interested.
I can probably arrange pickup and short term storage if needed.
http://www.ebay.com/itm/191737673720
Kelly
Looks complete! 32K Core Parity RAM The system has 4 8K Core sets: G235 (xy drive module) H217D (memory stack) G114 (sense / inhibit) M8293 (memory control module) My Industrial 11 has 96K, but same kind of RAM. -- Bill
I will NOT bid… my wife would kill me.
On Nov 13, 2015, at 2:26 PM, william degnan via vcf-midatlantic <vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
On Fri, Nov 13, 2015 at 1:43 PM, Kelly Leavitt via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Not what I collect, but some may be interested.
I can probably arrange pickup and short term storage if needed.
http://www.ebay.com/itm/191737673720
Kelly
Looks complete! 32K Core Parity RAM
The system has 4 8K Core sets: G235 (xy drive module) H217D (memory stack) G114 (sense / inhibit) M8293 (memory control module)
My Industrial 11 has 96K, but same kind of RAM. --
Bill
Sounds like you are trying to convince yourself. :-) On Fri, Nov 13, 2015 at 2:32 PM, David Hoelzer via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
I will NOT bid… my wife would kill me.
On Nov 13, 2015, at 2:26 PM, william degnan via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
On Fri, Nov 13, 2015 at 1:43 PM, Kelly Leavitt via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Not what I collect, but some may be interested.
I can probably arrange pickup and short term storage if needed.
http://www.ebay.com/itm/191737673720
Kelly
Looks complete! 32K Core Parity RAM
The system has 4 8K Core sets: G235 (xy drive module) H217D (memory stack) G114 (sense / inhibit) M8293 (memory control module)
My Industrial 11 has 96K, but same kind of RAM. --
Bill
Uhgg I realllyyy shouldn't, but I can't stop myself from putting in at-least one bid. My parents may kill me if they see another rack enter this basement though hah. But we all know how these auctions usually go... -Connor K On 11/13/2015 1:43 PM, Kelly Leavitt via vcf-midatlantic wrote:
Not what I collect, but some may be interested.
I can probably arrange pickup and short term storage if needed.
http://www.ebay.com/itm/191737673720
Kelly
Go for it Connor! (Don't tell your parents I said anything.) I hope it goes to a good home. On Fri, Nov 13, 2015 at 2:40 PM, Connor Krukosky via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
Uhgg I realllyyy shouldn't, but I can't stop myself from putting in at-least one bid. My parents may kill me if they see another rack enter this basement though hah. But we all know how these auctions usually go...
-Connor K
On 11/13/2015 1:43 PM, Kelly Leavitt via vcf-midatlantic wrote:
Not what I collect, but some may be interested.
I can probably arrange pickup and short term storage if needed.
http://www.ebay.com/itm/191737673720
Kelly
I was about to bid, but I won't if you're chasing it. But who are we kidding; one of the oldest PDP-11 models, in near-showroom condition..it'll likely go for thousands. (and DAMMIT it's one of the few models I don't have!) -Dave On 11/13/2015 02:40 PM, Connor Krukosky via vcf-midatlantic wrote:
Uhgg I realllyyy shouldn't, but I can't stop myself from putting in at-least one bid. My parents may kill me if they see another rack enter this basement though hah. But we all know how these auctions usually go...
-Connor K
On 11/13/2015 1:43 PM, Kelly Leavitt via vcf-midatlantic wrote:
Not what I collect, but some may be interested.
I can probably arrange pickup and short term storage if needed.
http://www.ebay.com/itm/191737673720
Kelly
-- Dave McGuire, AK4HZ New Kensington, PA
Maybe one of you guys can contact the seller and make a deal so as to avoid the aggravation of bidding. The other possibility is that there will be few people who are interested who can also arrange to pick it up locally. Good luck to you all. On Fri, Nov 13, 2015 at 3:02 PM, Dave McGuire via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
I was about to bid, but I won't if you're chasing it. But who are we kidding; one of the oldest PDP-11 models, in near-showroom condition..it'll likely go for thousands.
(and DAMMIT it's one of the few models I don't have!)
-Dave
On 11/13/2015 02:40 PM, Connor Krukosky via vcf-midatlantic wrote:
Uhgg I realllyyy shouldn't, but I can't stop myself from putting in at-least one bid. My parents may kill me if they see another rack enter this basement though hah. But we all know how these auctions usually go...
-Connor K
On 11/13/2015 1:43 PM, Kelly Leavitt via vcf-midatlantic wrote:
Not what I collect, but some may be interested.
I can probably arrange pickup and short term storage if needed.
http://www.ebay.com/itm/191737673720
Kelly
-- Dave McGuire, AK4HZ New Kensington, PA
The seller clearly knows what it is, and the aggravation of bidding will get him/her quite a bit of cash, so I really don't see that working out. Unfortunately I lack the financial wherewithal (especially after corporate tax day a few weeks ago) to "make him an offer he cannot refuse", so to speak. -Dave On 11/13/2015 03:07 PM, Chris Fala via vcf-midatlantic wrote:
Maybe one of you guys can contact the seller and make a deal so as to avoid the aggravation of bidding. The other possibility is that there will be few people who are interested who can also arrange to pick it up locally. Good luck to you all.
On Fri, Nov 13, 2015 at 3:02 PM, Dave McGuire via vcf-midatlantic < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
I was about to bid, but I won't if you're chasing it. But who are we kidding; one of the oldest PDP-11 models, in near-showroom condition..it'll likely go for thousands.
(and DAMMIT it's one of the few models I don't have!)
-Dave
On 11/13/2015 02:40 PM, Connor Krukosky via vcf-midatlantic wrote:
Uhgg I realllyyy shouldn't, but I can't stop myself from putting in at-least one bid. My parents may kill me if they see another rack enter this basement though hah. But we all know how these auctions usually go...
-Connor K
On 11/13/2015 1:43 PM, Kelly Leavitt via vcf-midatlantic wrote:
Not what I collect, but some may be interested.
I can probably arrange pickup and short term storage if needed.
http://www.ebay.com/itm/191737673720
Kelly
-- Dave McGuire, AK4HZ New Kensington, PA
-- Dave McGuire, AK4HZ New Kensington, PA
I *really* want this, as a /35, /40, /45 or /70 has been my "holy grail" for computers for about two decades. I'm going to keep a close eye on this, and see what money I can scrape together, but, something tells me I won't be able to afford what it goes for. I wonder if I could get the bank to give me a loan. Or... anyone wanna buy a really rusty gold van? -Ian On Fri, Nov 13, 2015 at 3:02 PM, Dave McGuire via vcf-midatlantic <vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
I was about to bid, but I won't if you're chasing it. But who are we kidding; one of the oldest PDP-11 models, in near-showroom condition..it'll likely go for thousands.
(and DAMMIT it's one of the few models I don't have!)
-Dave
On 11/13/2015 02:40 PM, Connor Krukosky via vcf-midatlantic wrote:
Uhgg I realllyyy shouldn't, but I can't stop myself from putting in at-least one bid. My parents may kill me if they see another rack enter this basement though hah. But we all know how these auctions usually go...
-Connor K
On 11/13/2015 1:43 PM, Kelly Leavitt via vcf-midatlantic wrote:
Not what I collect, but some may be interested.
I can probably arrange pickup and short term storage if needed.
http://www.ebay.com/itm/191737673720
Kelly
-- Dave McGuire, AK4HZ New Kensington, PA
On Nov 13, 2015 8:03 PM, "Ian Primus via vcf-midatlantic" < vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
I *really* want this, as a /35, /40, /45 or /70 has been my "holy grail" for computers for about two decades. I'm going to keep a close eye on this, and see what money I can scrape together, but, something tells me I won't be able to afford what it goes for. I wonder if I could get the bank to give me a loan. Or... anyone wanna buy a really rusty gold van?
-Ian
On Fri, Nov 13, 2015 at 3:02 PM, Dave McGuire via vcf-midatlantic <vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
I was about to bid, but I won't if you're chasing it. But who are we kidding; one of the oldest PDP-11 models, in near-showroom condition..it'll likely go for thousands.
(and DAMMIT it's one of the few models I don't have!)
-Dave
On 11/13/2015 02:40 PM, Connor Krukosky via vcf-midatlantic wrote:
Uhgg I realllyyy shouldn't, but I can't stop myself from putting in at-least one bid. My parents may kill me if they see another rack enter this basement though hah. But we all know how these auctions usually go...
-Connor K
On 11/13/2015 1:43 PM, Kelly Leavitt via vcf-midatlantic wrote:
Not what I collect, but some may be interested.
I can probably arrange pickup and short term storage if needed.
http://www.ebay.com/itm/191737673720
Kelly
-- Dave McGuire, AK4HZ New Kensington, PA
If anyone from MARCH gets it, let's work together to restore
On Nov 13, 2015 8:18 PM, "william degnan" <billdegnan@gmail.com> wrote:
On Nov 13, 2015 8:03 PM, "Ian Primus via vcf-midatlantic" <
vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
I *really* want this, as a /35, /40, /45 or /70 has been my "holy grail" for computers for about two decades. I'm going to keep a close eye on this, and see what money I can scrape together, but, something tells me I won't be able to afford what it goes for. I wonder if I could get the bank to give me a loan. Or... anyone wanna buy a really rusty gold van?
-Ian
On Fri, Nov 13, 2015 at 3:02 PM, Dave McGuire via vcf-midatlantic <vcf-midatlantic@lists.vintagecomputerfederation.org> wrote:
I was about to bid, but I won't if you're chasing it. But who are
we
kidding; one of the oldest PDP-11 models, in near-showroom condition..it'll likely go for thousands.
(and DAMMIT it's one of the few models I don't have!)
-Dave
On 11/13/2015 02:40 PM, Connor Krukosky via vcf-midatlantic wrote:
Uhgg I realllyyy shouldn't, but I can't stop myself from putting in at-least one bid. My parents may kill me if they see another rack enter this basement though hah. But we all know how these auctions usually go...
-Connor K
On 11/13/2015 1:43 PM, Kelly Leavitt via vcf-midatlantic wrote:
Not what I collect, but some may be interested.
I can probably arrange pickup and short term storage if needed.
http://www.ebay.com/itm/191737673720
Kelly
-- Dave McGuire, AK4HZ New Kensington, PA
If anyone from MARCH gets it, let's work together to restore
Here is the present status of my project http://vintagecomputer.net/pictures/2015/Moving/
participants (7)
-
Chris Fala -
Connor Krukosky -
Dave McGuire -
David Hoelzer -
Ian Primus -
Kelly Leavitt -
william degnan