Ken & myself were on site today for a few hours, the fiber to 9011 and 9036 is active, equipment installation in 9011 pending (no access) , unsure if VCF installed the 9036 equipment, or if it's still needed. Had to use a fiber pair from 9010 to support 9011 as it was not part of the original project scope. Happy New Year... Martin
Had to use a fiber pair from 9010 to support 9011 as it was not part of the original project scope.
Takeaway: we share bandwidth? On 12/30/2023 4:36 PM, Martin A. Flynn via vcf-midatlantic wrote:
Ken & myself were on site today for a few hours, the fiber to 9011 and 9036 is active, equipment installation in 9011 pending (no access) , unsure if VCF installed the 9036 equipment, or if it's still needed.
Had to use a fiber pair from 9010 to support 9011 as it was not part of the original project scope.
Happy New Year...
Martin
-- Douglas Crawford VCF Mid-Atlantic Museum Mgr InfoAge Science & History Museums 2201 Marconi Road Wall, NJ 07719
Nope - each "H" building is a 10GB direct connection to the Cisco 4900M that acts as the core switch. On 12/30/2023 4:47 PM, Douglas Crawford via vcf-midatlantic wrote:
Had to use a fiber pair from 9010 to support 9011 as it was not part of the original project scope.
Takeaway: we share bandwidth?
On 12/30/2023 4:36 PM, Martin A. Flynn via vcf-midatlantic wrote:
Ken & myself were on site today for a few hours, the fiber to 9011 and 9036 is active, equipment installation in 9011 pending (no access) , unsure if VCF installed the 9036 equipment, or if it's still needed.
Had to use a fiber pair from 9010 to support 9011 as it was not part of the original project scope.
Happy New Year...
Martin
OK then what is the significance of using a fiber pair from 9010 to support 9011. On 12/30/2023 4:59 PM, Martin A. Flynn via vcf-midatlantic wrote:
Nope - each "H" building is a 10GB direct connection to the Cisco 4900M that acts as the core switch.
On 12/30/2023 4:47 PM, Douglas Crawford via vcf-midatlantic wrote:
Had to use a fiber pair from 9010 to support 9011 as it was not part of the original project scope.
Takeaway: we share bandwidth?
On 12/30/2023 4:36 PM, Martin A. Flynn via vcf-midatlantic wrote:
Ken & myself were on site today for a few hours, the fiber to 9011 and 9036 is active, equipment installation in 9011 pending (no access) , unsure if VCF installed the 9036 equipment, or if it's still needed.
Had to use a fiber pair from 9010 to support 9011 as it was not part of the original project scope.
Happy New Year...
Martin
-- Douglas Crawford VCF Mid-Atlantic Museum Mgr InfoAge Science & History Museums 2201 Marconi Road Wall, NJ 07719
Doug, There no longer is a spare pair available in the group allocated to 9010. Martin On 12/31/2023 10:18 AM, Douglas Crawford via vcf-transatlantic wrote:
OK then what is the significance of using a fiber pair from 9010 to support 9011.
On 12/30/2023 4:59 PM, Martin A. Flynn via vcf-midatlantic wrote:
Nope - each "H" building is a 10GB direct connection to the Cisco 4900M that acts as the core switch.
On 12/30/2023 4:47 PM, Douglas Crawford via vcf-midatlantic wrote:
Had to use a fiber pair from 9010 to support 9011 as it was not part of the original project scope.
Takeaway: we share bandwidth?
On 12/30/2023 4:36 PM, Martin A. Flynn via vcf-midatlantic wrote:
Ken & myself were on site today for a few hours, the fiber to 9011 and 9036 is active, equipment installation in 9011 pending (no access) , unsure if VCF installed the 9036 equipment, or if it's still needed.
Had to use a fiber pair from 9010 to support 9011 as it was not part of the original project scope.
Happy New Year...
Martin
participants (2)
-
Douglas Crawford -
Martin A. Flynn