Steve A. and I worked for several more hours in the museum today. Big accomplishments: finally hung our banner outside the building (Steve is fearless on an extension ladder!) and got the stanchions/chains set up inside. Steve being immune to gravity: http://vcfed.org/evan/ladder.jpg. Our sign next to the surfer group's sign: http://vcfed.org/evan/vcf_surfers.jpg. We only used the grommets on the corners. I thought we'd need the ones along the middle/edges, but today was very windy and the sign barely billowed at all, so it's probably all set. Perhaps we will install the middle bolts on a warm sunny day. For now the sign is mounted tight, it looks good, and it's definitely not going anywhere. Our homemade stanchions tend to get bumped into and moved off-course by visitors. Easy way to deal with that: we took a fine-tip black Sharpie and traced the bottom of each stanchion base. That way, it's obvious where they go back. We also cleaned more, moved lots of stuff back to the warehouse (including our outdoor-style trash can), and purchased a nice indoor-style can for the museum. Picked up a couple of rolls of blue duct tape, which we'll use to create a walking aisle around museum exhibits. We're not worried about the tape ripping up the gray paint on the floor because we are a developing a creative and fun re-painting plan for the floor this summer anyhow. I stayed up extremely late last night and found a nice (and simple) way to format all the microcomputer signs. Going to print and hang them on Tuesday. The frames we ordered (24 pack for the larger 13x19 frames) arrived; we'll use those for the larger systems and in various other places around the museum. The only major thing that won't be done in time for VCF East is setting up the Android kiosks. That will have to be a summer project.