Anyone have the dims for the following DIP packages? DIP-14N PDIP package DIP-40 CDIP package DIP-32 CDIP package DIP-28 CDIP package DIP-24 CDIP package Martin Flynn
https://ww1.microchip.com/downloads/en/PackagingSpec/00049w.pdf This PDF lists them all. On Sat, Mar 25, 2023 at 10:09 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Anyone have the dims for the following DIP packages?
DIP-14N PDIP package DIP-40 CDIP package DIP-32 CDIP package DIP-28 CDIP package DIP-24 CDIP package
Martin Flynn
Mark, Many thanks! CDL is sourcing additional nozzles for the Hakko FR-802 Hot Air rework station, starting with the common vintage DIP packages. The system will be available for VCF workshops and repair clinics. Martin Flynn On 3/28/2023 5:05 AM, Mark Whittington via vcf-midatlantic wrote:
https://ww1.microchip.com/downloads/en/PackagingSpec/00049w.pdf
This PDF lists them all.
On Sat, Mar 25, 2023 at 10:09 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Anyone have the dims for the following DIP packages?
DIP-14N PDIP package DIP-40 CDIP package DIP-32 CDIP package DIP-28 CDIP package DIP-24 CDIP package
Martin, My pleasure! Happy to help out. If you know anyone hiring a professional Google question answerer, or perhaps a lead-level software developer in Python or Go that doesn't mind remote workers in VA, I'd appreciate the lead :) Best, Mark On Tue, Mar 28, 2023 at 7:24 AM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Mark,
Many thanks!
CDL is sourcing additional nozzles for the Hakko FR-802 Hot Air rework station, starting with the common vintage DIP packages.
The system will be available for VCF workshops and repair clinics.
Martin Flynn
On 3/28/2023 5:05 AM, Mark Whittington via vcf-midatlantic wrote:
https://ww1.microchip.com/downloads/en/PackagingSpec/00049w.pdf
This PDF lists them all.
On Sat, Mar 25, 2023 at 10:09 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Anyone have the dims for the following DIP packages?
DIP-14N PDIP package DIP-40 CDIP package DIP-32 CDIP package DIP-28 CDIP package DIP-24 CDIP package
Well that wasn't supposed to go to the list. And here I am thinking I'm a professional Google application user, and I can't even properly use gmail. Apologies for the spam everyone. Mark On Tue, Mar 28, 2023 at 7:47 AM Mark Whittington <markwhi@gmail.com> wrote:
Martin,
My pleasure! Happy to help out.
If you know anyone hiring a professional Google question answerer, or perhaps a lead-level software developer in Python or Go that doesn't mind remote workers in VA, I'd appreciate the lead :)
Best,
Mark
On Tue, Mar 28, 2023 at 7:24 AM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Mark,
Many thanks!
CDL is sourcing additional nozzles for the Hakko FR-802 Hot Air rework station, starting with the common vintage DIP packages.
The system will be available for VCF workshops and repair clinics.
Martin Flynn
On 3/28/2023 5:05 AM, Mark Whittington via vcf-midatlantic wrote:
https://ww1.microchip.com/downloads/en/PackagingSpec/00049w.pdf
This PDF lists them all.
On Sat, Mar 25, 2023 at 10:09 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Anyone have the dims for the following DIP packages?
DIP-14N PDIP package DIP-40 CDIP package DIP-32 CDIP package DIP-28 CDIP package DIP-24 CDIP package
Umm, what is CDL? I’ve never heard of them. Thanks, Marc Howard On Tue, Mar 28, 2023 at 7:24 AM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Mark,
Many thanks!
CDL is sourcing additional nozzles for the Hakko FR-802 Hot Air rework station, starting with the common vintage DIP packages.
The system will be available for VCF workshops and repair clinics.
Martin Flynn
On 3/28/2023 5:05 AM, Mark Whittington via vcf-midatlantic wrote:
https://ww1.microchip.com/downloads/en/PackagingSpec/00049w.pdf
This PDF lists them all.
On Sat, Mar 25, 2023 at 10:09 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Anyone have the dims for the following DIP packages?
DIP-14N PDIP package DIP-40 CDIP package DIP-32 CDIP package DIP-28 CDIP package DIP-24 CDIP package
CDL is the makerspace adjacent (next building) to the VCF physical museum at Camp Evans in Wall, NJ. Sent from my iPhone
On Mar 28, 2023, at 8:15 AM, Marc Howard <cramcram@gmail.com> wrote:
Umm, what is CDL? I’ve never heard of them.
Thanks,
Marc Howard
On Tue, Mar 28, 2023 at 7:24 AM Martin Flynn via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote: Mark,
Many thanks!
CDL is sourcing additional nozzles for the Hakko FR-802 Hot Air rework station, starting with the common vintage DIP packages.
The system will be available for VCF workshops and repair clinics.
Martin Flynn
On 3/28/2023 5:05 AM, Mark Whittington via vcf-midatlantic wrote:
https://ww1.microchip.com/downloads/en/PackagingSpec/00049w.pdf
This PDF lists them all.
On Sat, Mar 25, 2023 at 10:09 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Anyone have the dims for the following DIP packages?
DIP-14N PDIP package DIP-40 CDIP package DIP-32 CDIP package DIP-28 CDIP package DIP-24 CDIP package
I think it makes sense to have a reasonable assortment of standard round nozzles as well. Those are generally less expensive than the package specific ones and are pretty useful as they can be used for heating a region of the PCB. The other item that might be useful, if you don’t have one yet, is an IR preheater. These warm up a region of the board so that much less heat is required from the hot air reflow station. David
On Mar 28, 2023, at 9:00 AM, Martin Flynn via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote:
CDL is the makerspace adjacent (next building) to the VCF physical museum at Camp Evans in Wall, NJ.
Sent from my iPhone
On Mar 28, 2023, at 8:15 AM, Marc Howard <cramcram@gmail.com> wrote:
Umm, what is CDL? I’ve never heard of them.
Thanks,
Marc Howard
On Tue, Mar 28, 2023 at 7:24 AM Martin Flynn via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote: Mark,
Many thanks!
CDL is sourcing additional nozzles for the Hakko FR-802 Hot Air rework station, starting with the common vintage DIP packages.
The system will be available for VCF workshops and repair clinics.
Martin Flynn
On 3/28/2023 5:05 AM, Mark Whittington via vcf-midatlantic wrote:
https://ww1.microchip.com/downloads/en/PackagingSpec/00049w.pdf
This PDF lists them all.
On Sat, Mar 25, 2023 at 10:09 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Anyone have the dims for the following DIP packages?
DIP-14N PDIP package DIP-40 CDIP package DIP-32 CDIP package DIP-28 CDIP package DIP-24 CDIP package
David, Only have two round nozzles at the moment: A1130 (4.4 mm Hot Air Nozzle) and A1124B (2.5 mm Hot Air Nozzle) Looking at IR pre-heaters, downside is the cost. Considering the Hakko FR830-02 as a stop gap. Martin On 3/28/2023 9:07 AM, David Ryskalczyk wrote:
I think it makes sense to have a reasonable assortment of standard round nozzles as well. Those are generally less expensive than the package specific ones and are pretty useful as they can be used for heating a region of the PCB.
The other item that might be useful, if you don’t have one yet, is an IR preheater. These warm up a region of the board so that much less heat is required from the hot air reflow station.
David
On Mar 28, 2023, at 9:00 AM, Martin Flynn via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote:
CDL is the makerspace adjacent (next building) to the VCF physical museum at Camp Evans in Wall, NJ.
Sent from my iPhone
On Mar 28, 2023, at 8:15 AM, Marc Howard <cramcram@gmail.com> wrote:
Umm, what is CDL? I’ve never heard of them.
Thanks,
Marc Howard
On Tue, Mar 28, 2023 at 7:24 AM Martin Flynn via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote: Mark,
Many thanks!
CDL is sourcing additional nozzles for the Hakko FR-802 Hot Air rework station, starting with the common vintage DIP packages.
The system will be available for VCF workshops and repair clinics.
Martin Flynn
On 3/28/2023 5:05 AM, Mark Whittington via vcf-midatlantic wrote:
https://ww1.microchip.com/downloads/en/PackagingSpec/00049w.pdf
This PDF lists them all.
On Sat, Mar 25, 2023 at 10:09 PM Martin Flynn via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
Anyone have the dims for the following DIP packages?
DIP-14N PDIP package DIP-40 CDIP package DIP-32 CDIP package DIP-28 CDIP package DIP-24 CDIP package
participants (4)
-
David Ryskalczyk -
Marc Howard -
Mark Whittington -
Martin Flynn