[vcf-midatlantic] Recapping a Mac IIci

[Richard Cini]

Ok, looks like it works...sort of. The soft power switch seems to keep turning the machine on, and the Radius 8-bit video card isn’t working with this board (not sure why). But, at least it’s running. I suspect there is an issue with the power switch itself on this board, and the positioning of it (the twist, horizontal or vertical) doesn’t seem to matter. I did swap power supplies and that has no effect.

I’d still like to get the other board recapped and working again. If there is no real “service” for this any longer, I could do it again. It was just a little nerve wracking for me. I found that the solder Apple used doesn’t melt well with a regular iron and I would up lifting a pad getting a cap off.

Rich

http://www.classiccmp.org/cini
Long Island S100 User’s Group

Get Outlook<https://aka.ms/qtex0l> for iOS

________________________________
From: Richard Cini <rich.cini at gmail.com>
Sent: Saturday, September 19, 2020 2:56:08 PM
To: vcf-midatlantic <vcf-midatlantic at lists.vcfed.org>
Subject: Recapping a Mac IIci

All —

I have an Apple IIci main board that need recapping. Does anyone know of someone that does this? I bought a recapping kit and tried it on my spare machine and it doesn’t seem to work (I get the bing but no video; no explosion at least) but I’d rather not try it on the main machine.

Thanks!
Rich


http://www.classiccmp.org/cini
Long Island S100 User’s Group

Get Outlook<https://aka.ms/qtex0l> for iOS