[vcf-midatlantic] OT: Help at InfoAge 7/31 for drilling holes, cutting blocking, mounting equipment

[Jeffrey Brace]

Martin will be at InfoAge on July 31 from 9AM to 5PM and needs help with
the following:


   - Set the cable anchors in the hotel basement for the fiber optic cables
   (about a dozen 1/4" holes in the concrete beam between the front wall of
   the hotel and the column by the rack)
   - Open up the holes for the equipment rack in the hotel basement floor.
   (four 1/2"  holes with a hammer drill)
   - Mount the network equipment rack in the furnace room at the read of
   9032A.
   - Assemble and rack the second UPS in 9059, and move red power cables to
   it.
   - Drill the hole from the media recover office on the second floor of
   the hotel into the attic. (one  1/2"  hole with a hammer drill)
   - Cut the blocking for the underside of the engineers desk in 9059 with
   the little table saw.

Anyone willing to help anywhere in that time frame?

=========================================
Jeff Brace
Vice President & Board Member
Vintage Computer Festival East Show-runner
Vintage Computer Federation is a 501c3 charity
http://www.vcfed.org/
jeffrey at vcfed.org