[vcf-midatlantic] OT: Help at InfoAge 7/31 for drilling holes, cutting blocking, mounting equipment
Jonathan Chapman
lists at glitchwrks.com
Sun Jul 25 20:31:41 UTC 2021
Not sure what your equipment is like, but I've got a Hilti SDS rotary hammer if you guys have only a standard hammer drill. That concrete is going to be old and very tough!
Thanks,
Jonathan
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Sunday, July 25th, 2021 at 16:09, Jeffrey Brace via vcf-midatlantic <vcf-midatlantic at lists.vcfed.org> wrote:
> Martin will be at InfoAge on July 31 from 9AM to 5PM and needs help with
>
> the following:
>
> - Set the cable anchors in the hotel basement for the fiber optic cables
>
> (about a dozen 1/4" holes in the concrete beam between the front wall of
>
> the hotel and the column by the rack)
> - Open up the holes for the equipment rack in the hotel basement floor.
>
> (four 1/2" holes with a hammer drill)
> - Mount the network equipment rack in the furnace room at the read of
>
> 9032A.
> - Assemble and rack the second UPS in 9059, and move red power cables to
>
> it.
> - Drill the hole from the media recover office on the second floor of
>
> the hotel into the attic. (one 1/2" hole with a hammer drill)
> - Cut the blocking for the underside of the engineers desk in 9059 with
>
> the little table saw.
>
> Anyone willing to help anywhere in that time frame?
>
> =========================================
>
> Jeff Brace
>
> Vice President & Board Member
>
> Vintage Computer Festival East Show-runner
>
> Vintage Computer Federation is a 501c3 charity
>
> http://www.vcfed.org/
>
> jeffrey at vcfed.org
More information about the vcf-midatlantic
mailing list