[vcf-midatlantic] OT: Help at InfoAge 7/31 for drilling holes, cutting blocking, mounting equipment

Jonathan Chapman lists at glitchwrks.com
Sun Jul 25 20:49:27 UTC 2021


SDS bits from small Tapcon to 1" I believe! I'll see if I can either make it up or send it with someone.

Thanks,
Jonathan

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Sunday, July 25th, 2021 at 16:44, Martin Flynn via vcf-midatlantic <vcf-midatlantic at lists.vcfed.org> wrote:

> Bring your implements of destruction!!
>
> Likely better than our hammer drill.
>
> Got a 1/4" bit for it??
>
> Martin
>
> On 7/25/2021 4:31 PM, Jonathan Chapman via vcf-midatlantic wrote:
>
> > Not sure what your equipment is like, but I've got a Hilti SDS rotary hammer if you guys have only a standard hammer drill. That concrete is going to be old and very tough!
> >
> > Thanks,
> >
> > Jonathan
> >
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> >
> > On Sunday, July 25th, 2021 at 16:09, Jeffrey Brace via vcf-midatlantic vcf-midatlantic at lists.vcfed.org wrote:
> >
> > > Martin will be at InfoAge on July 31 from 9AM to 5PM and needs help with
> > >
> > > the following:
> > >
> > > -   Set the cable anchors in the hotel basement for the fiber optic cables
> > >
> > >     (about a dozen 1/4" holes in the concrete beam between the front wall of
> > >
> > >     the hotel and the column by the rack)
> > >
> > > -   Open up the holes for the equipment rack in the hotel basement floor.
> > >
> > >     (four 1/2" holes with a hammer drill)
> > >
> > > -   Mount the network equipment rack in the furnace room at the read of
> > >
> > >     9032A.
> > >
> > > -   Assemble and rack the second UPS in 9059, and move red power cables to
> > >
> > >     it.
> > >
> > > -   Drill the hole from the media recover office on the second floor of
> > >
> > >     the hotel into the attic. (one 1/2" hole with a hammer drill)
> > >
> > > -   Cut the blocking for the underside of the engineers desk in 9059 with
> > >
> > >     the little table saw.
> > >
> > >     Anyone willing to help anywhere in that time frame?
> > >
> > >     =========================================
> > >
> > >     Jeff Brace
> > >
> > >     Vice President & Board Member
> > >
> > >     Vintage Computer Festival East Show-runner
> > >
> > >     Vintage Computer Federation is a 501c3 charity
> > >
> > >     http://www.vcfed.org/
> > >
> > >     jeffrey at vcfed.org
> > >


More information about the vcf-midatlantic mailing list