VCF Mid-Atlantic Steering Committee Nominations
Members of the VCF MidAtlantic Mailing List, Another year has passed by, and it's time for the VCF-MA annual Steering Committee elections There are currently four seats becoming vacant. Jeff Salzman, Dave McGuire, Doug Crawford, and Ian Litchfield have either reached the end of their appointed terms or have resigned. Nominations to fill those positions are now open. The election will be held according to sections 4 and 5 of our published by-laws, listed at the end of this email and linked below. https://vcfed.org/wp-content/uploads/2022/07/VCFMA-Charter-Jul2022.pdf). Anyone who directly receives this message and has been a member of the VCF Mailing List for at least 30 days is eligible to vote. There is no 30-day restriction to mailing list membership to be nominated as a candidate. Current members of the mailing list in good standing are eligible to submit nominations for Committee member candidates. Nominations can be made by simply communicating the nomination via e-mail to a current Committee member: Thomas Gilinsky - thomas.gilinsky@vcfed.org, Dave McGuire - dave.mcguire@vcfed.org, Douglas Crawford - douglas.crawford@vcfed.org, Ian Litchfield - ian.litchfield@vcfed.org, or Jeff Salzman - jeff.salzman@vcf.org). Members of the mailing list may also self-nominate. To be eligible for the election, the prospective nominee must then accept the nomination by replying in the affirmative to the nomination email. One nomination per member can be made. Nominations will close on November 23nd at 11:59PM. An updated list of eligible nominees will be published regularly. Nominees are also encouraged to provide a position statement, which will be posted to the VCF-MA website for prospective voters to read. Voting will commence on November 30th, and will close at 11:59pm on December 13. Winners will be announced on December 14 during the Town hall event at our annual VCF Holiday celebration. Thank you, Jeff Salzman Chairman - VCF-MA Steering Committee ---------------------------------------- 4. COMMITTEE ELECTIONS Steering committee membership includes representation of VCF membership, as determined by the VCF governing board and VCF-MA sponsored elections. - The committee membership will be determined by elections to be held on a yearly basis (currently November). - Committee membership is ideally comprised of five people but may vary due to changing circumstances. Any committee vote to determine an increase in committee members shall be held within six months after a new election cycle. - A minimum of one seat will be up for election in every cycle, unless additional vacancies create the need for additional seats to be filled, in which case all vacant seats will be up for election in that cycle. - In the event of a tie, a two-week runoff election will be held. - If a tie still exists after the runoff, the non-running committee members will determine a winner. - In the event of a committee tie, the current chairperson or chair delegate will determine the winner. - Nominations for committee members can be made by current members in good standing simply by communicating the nomination to a committee member. One nomination per member can be made. Said members may also self-nominate. - In the case of off-cycle vacancies, the committee may move, without a public election, to appoint by simple majority vote new committee members to fill the seats until the next scheduled election. - A committee chairperson will be appointed by the committee members within 30 days of each completed election cycle. At that time a recording secretary will be selected. - Prospective committee members should be knowledgeable in some aspect of computing, preferably vintage computers, and show a demonstrated interest in vintage computing, computing history, and museum management and governance. - In order to be sufficiently aware and have proper perspective of museum and warehouse issues, prospective committee members should be able to physically attend VCF events at least quarterly and attend meetings regularly. 5. VCF MEMBERSHIP VCF general membership is open and granted to anyone who joins the mailing list. Voting rights will be granted to active list members who join no less than 30 days before an election.
Massachusetts chapter? Sent from Nine<http://www.9folders.com/> ________________________________ From: Jeff Salzman via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> Sent: Monday, November 11, 2024 6:41 PM To: vcf-midatlantic Cc: Jeff Salzman Subject: [vcf-midatlantic] VCF Mid-Atlantic Steering Committee Nominations Members of the VCF MidAtlantic Mailing List, Another year has passed by, and it's time for the VCF-MA annual Steering Committee elections There are currently four seats becoming vacant. Jeff Salzman, Dave McGuire, Doug Crawford, and Ian Litchfield have either reached the end of their appointed terms or have resigned. Nominations to fill those positions are now open. The election will be held according to sections 4 and 5 of our published by-laws, listed at the end of this email and linked below. https://vcfed.org/wp-content/uploads/2022/07/VCFMA-Charter-Jul2022.pdf). Anyone who directly receives this message and has been a member of the VCF Mailing List for at least 30 days is eligible to vote. There is no 30-day restriction to mailing list membership to be nominated as a candidate. Current members of the mailing list in good standing are eligible to submit nominations for Committee member candidates. Nominations can be made by simply communicating the nomination via e-mail to a current Committee member: Thomas Gilinsky - thomas.gilinsky@vcfed.org, Dave McGuire - dave.mcguire@vcfed.org, Douglas Crawford - douglas.crawford@vcfed.org, Ian Litchfield - ian.litchfield@vcfed.org, or Jeff Salzman - jeff.salzman@vcf.org). Members of the mailing list may also self-nominate. To be eligible for the election, the prospective nominee must then accept the nomination by replying in the affirmative to the nomination email. One nomination per member can be made. Nominations will close on November 23nd at 11:59PM. An updated list of eligible nominees will be published regularly. Nominees are also encouraged to provide a position statement, which will be posted to the VCF-MA website for prospective voters to read. Voting will commence on November 30th, and will close at 11:59pm on December 13. Winners will be announced on December 14 during the Town hall event at our annual VCF Holiday celebration. Thank you, Jeff Salzman Chairman - VCF-MA Steering Committee ---------------------------------------- 4. COMMITTEE ELECTIONS Steering committee membership includes representation of VCF membership, as determined by the VCF governing board and VCF-MA sponsored elections. - The committee membership will be determined by elections to be held on a yearly basis (currently November). - Committee membership is ideally comprised of five people but may vary due to changing circumstances. Any committee vote to determine an increase in committee members shall be held within six months after a new election cycle. - A minimum of one seat will be up for election in every cycle, unless additional vacancies create the need for additional seats to be filled, in which case all vacant seats will be up for election in that cycle. - In the event of a tie, a two-week runoff election will be held. - If a tie still exists after the runoff, the non-running committee members will determine a winner. - In the event of a committee tie, the current chairperson or chair delegate will determine the winner. - Nominations for committee members can be made by current members in good standing simply by communicating the nomination to a committee member. One nomination per member can be made. Said members may also self-nominate. - In the case of off-cycle vacancies, the committee may move, without a public election, to appoint by simple majority vote new committee members to fill the seats until the next scheduled election. - A committee chairperson will be appointed by the committee members within 30 days of each completed election cycle. At that time a recording secretary will be selected. - Prospective committee members should be knowledgeable in some aspect of computing, preferably vintage computers, and show a demonstrated interest in vintage computing, computing history, and museum management and governance. - In order to be sufficiently aware and have proper perspective of museum and warehouse issues, prospective committee members should be able to physically attend VCF events at least quarterly and attend meetings regularly. 5. VCF MEMBERSHIP VCF general membership is open and granted to anyone who joins the mailing list. Voting rights will be granted to active list members who join no less than 30 days before an election.
The Computer Museum @ System Source just received two! PDP-9s. Plan is to get one working. So far, we are removing the filth! Have a look! https://museum.syssrc.com/pdp-9-restoration/ Bob Roswell broswell@syssrc.com 410-771-5544 ext 4336
A worthy restoration to attempt, I hope to see it running someday. Bill On Tue, Sep 1, 2026 at 11:38 PM Bob Roswell via vcf-midatlantic < vcf-midatlantic@lists.vcfed.org> wrote:
The Computer Museum @ System Source just received two! PDP-9s. Plan is to get one working.
So far, we are removing the filth! Have a look! https://museum.syssrc.com/pdp-9-restoration/
Bob Roswell broswell@syssrc.com 410-771-5544 ext 4336 <(410)%20771-5544>
Much worse than the VCF straight 8 was. Its going to be a "fun" project. Did any of the transistors fall off? I exchanged emails with someone restoring a straight 8 where the can transistors were falling off the boards due to leads rusting throught. I think he replaced all of them. Did get it working. On Wed, Sep 02, 2026 at 03:38:39AM +0000, Bob Roswell via vcf-midatlantic wrote:
The Computer Museum @ System Source just received two! PDP-9s. Plan is to get one working.
So far, we are removing the filth! Have a look! https://museum.syssrc.com/pdp-9-restoration/
Bob Roswell broswell@syssrc.com 410-771-5544 ext 4336
David Curious to know what transistors were originally on that board and what you were using for replacements? Simply because I came across a whole bunch of 60’s and 70’s transistors. I have already sold off many of them, but would like to know if maybe I have the ones that are needed? Mike Rosen Sent from: My extremely complicated, hand held electronic device.
On Sep 3, 2026, at 9:49 AM, David Gesswein via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> wrote:
Much worse than the VCF straight 8 was. Its going to be a "fun" project. Did any of the transistors fall off? I exchanged emails with someone restoring a straight 8 where the can transistors were falling off the boards due to leads rusting throught. I think he replaced all of them. Did get it working.
On Wed, Sep 02, 2026 at 03:38:39AM +0000, Bob Roswell via vcf-midatlantic wrote: The Computer Museum @ System Source just received two! PDP-9s. Plan is to get one working.
So far, we are removing the filth! Have a look! https://museum.syssrc.com/pdp-9-restoration/
Bob Roswell broswell@syssrc.com 410-771-5544 ext 4336
So far, so good. Nothing but rodent detritus and crud came off. Most importantly, the ammonia smell is gone after cleaning. The PDP-9s were purchased by Evans and Sutherland in Salt Lake City. They were used to design one of their graphics machines. An E&S employee took them home and used them until the mid-90s for his post E&S business. They were in a rodent invested shed when we got them. We have been cleaning one up. The process so far has been to vacuum the board, then put in the ultrasonic cleaner in a solution of water, simple green and trisodium phosphate. The boards are then rinsed and air dried. We have NOT tested that this does not damage these particular boards, but we have used this process extensively in other restoration projects without ill effects. Bob Roswell broswell@syssrc.com 410-771-5544 ext 4336 -----Original Message----- From: David Gesswein via vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> Sent: Thursday, September 3, 2026 9:49 AM To: vcf-midatlantic <vcf-midatlantic@lists.vcfed.org> Cc: David Gesswein <djg@pdp8online.com> Subject: [vcf-midatlantic] Re: Before and after pictures of a sample PDP-9 card (cleaning) Much worse than the VCF straight 8 was. Its going to be a "fun" project. Did any of the transistors fall off? I exchanged emails with someone restoring a straight 8 where the can transistors were falling off the boards due to leads rusting throught. I think he replaced all of them. Did get it working. On Wed, Sep 02, 2026 at 03:38:39AM +0000, Bob Roswell via vcf-midatlantic wrote:
The Computer Museum @ System Source just received two! PDP-9s. Plan is to get one working.
So far, we are removing the filth! Have a look! https://museum.syssrc.com/pdp-9-restoration/
Bob Roswell broswell@syssrc.com 410-771-5544 ext 4336
participants (6)
-
Bill Degnan -
Bob Roswell -
David Gesswein -
Jeff Salzman -
Sentrytv -
W2HX