February 2023 - vcf-midatlantic

Dinner reservations for tomorrow (Repair Workshop)
by Jeffrey Brace 10 Feb '23

10 Feb '23

This message is for those going out to dinner to Patrick's Grill tomorrow at the repair workshop I only have 9 people signed up so far. I made the reservations just now. It was a choice between 6PM and 8PM so I chose 8PM. Please let me know if there are any questions or problems. If you want to go and are not on the dinner signup list. <https://docs.google.com/spreadsheets/d/1uPXhGjZlyJJ7xuD7sBoplteTDLXAa34svEz…>, then let me know quickly tonight and I will add to the reservation. Don't know if I can add any more tomorrow. ========================================= Jeff Brace VCF National Board Member Chairman & Vice President Vintage Computer Festival East Showrunner Vintage Computer Federation is a 501c3 charity https://vcfed.org/ <http://www.vcfed.org/> jeffrey(a)vcfed.org

1 0

Re: [vcf-midatlantic] 2/11-2/12 Repair Workshop Weekend -- I could use help with some SCSI disk data recovery
by Dan FitzGerald 10 Feb '23

10 Feb '23

Jonathan, I tried using ddrescue last night, and was able to get a disk image. But both Linux and System 7.5.5 (under Basilisk II) say that they can't find a filesystem on the image. I know that the drive is marginal, however I can actually boot the SE from it, so I am confused as to why Basilisk II and Linux are saying that there is no readable filesystem on it. Regards, Dan FitzGerald They/Them/Theirs http://www.vm.ibm.com/devpages/dfitzger -----Original Message----- From: Jonathan Sturges via vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org> Reply-To: vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org> To: vcf-midatlantic(a)lists.vcfed.org <vcf-midatlantic(a)lists.vcfed.org> Cc: Jonathan Sturges <jonathansturges(a)yahoo.com> Subject: Re: [vcf-midatlantic] 2/11-2/12 Repair Workshop Weekend -- I could use help with some SCSI disk data recovery Date: 02/10/2023 12:36:08 PM

1 0

Re: [vcf-midatlantic] 2/11-2/12 Repair Workshop Weekend -- I could use help with some SCSI disk data recovery
by Jonathan Sturges 10 Feb '23

10 Feb '23

> I will be coming to the Repair Workshop both days this weekend, and I > am bringing some Macintosh SCSI hard drives that need data recovery. > ?Are any of the folks who are coming able to bring their tools/knowhow > for imaging misbehaving SCSI disks? If the disks still spin, ddrescue is as good as anything for imaging marginal drives. If you also want to do data recovery from the saved images, I've personally had better luck with COTS tools than open source. I can recommend Disk Drill PRO. -Jonathan

1 0

Dinner on Saturday at the Repair Workshop this weekend.
by Jeffrey Brace 10 Feb '23

10 Feb '23

If you didn't already let me know, then let me know NOW!!! if you are going to dinner with us. HERE IS THE INFO: *Saturday Night Dinner at 7PM*: SIGNUP FOR DINNER RESERVATIONS HERE <https://docs.google.com/spreadsheets/d/1uPXhGjZlyJJ7xuD7sBoplteTDLXAa34svEz…> * Patrick's Grille : https://patricksgrillenc.com/ ADDRESS: 62 W Sylvania Ave, Neptune City, NJ 07753 Please let me know if you are coming, I'm making reservations tomorrow Friday and need a headcount. ========================================= Jeff Brace VCF National Board Member Chairman & Vice President Vintage Computer Festival East Showrunner Vintage Computer Federation is a 501c3 charity https://vcfed.org/ <http://www.vcfed.org/> jeffrey(a)vcfed.org

1 0

2/11-2/12 Repair Workshop Weekend -- I could use help with some SCSI disk data recovery
by Dan FitzGerald 09 Feb '23

09 Feb '23

Folks, I will be coming to the Repair Workshop both days this weekend, and I am bringing some Macintosh SCSI hard drives that need data recovery. Are any of the folks who are coming able to bring their tools/knowhow for imaging misbehaving SCSI disks? Regards, Dan FitzGerald They/Them/Theirs http://www.vm.ibm.com/devpages/dfitzger

1 0

Saturday 2/11 Dinner at Repair Workshop 7PM
by Jeffrey Brace 09 Feb '23

09 Feb '23

Let me know now if you want to be included in the group. I'm making reservations for Saturday night at Patrick's Grill. It is a great place that we tried out last month. The reservations have to be made the day before. I'm reserving for 16 people, so the first 16 that reserve on this list will be included. HERE IS THE INFO: *Saturday Night Dinner at 7PM*: SIGNUP FOR DINNER RESERVATIONS HERE <https://docs.google.com/spreadsheets/d/1uPXhGjZlyJJ7xuD7sBoplteTDLXAa34svEz…> * Patrick's Grille : https://patricksgrillenc.com/ ADDRESS: 62 W Sylvania Ave, Neptune City, NJ 07753 Please let me know if you are coming, I'm making reservations tomorrow Friday and need a headcount. ========================================= Jeff Brace VCF National Board Member Chairman & Vice President Vintage Computer Festival East Showrunner Vintage Computer Federation is a 501c3 charity https://vcfed.org/ <http://www.vcfed.org/> jeffrey(a)vcfed.org

2 1

Retro Directory
by Christian Liendo 08 Feb '23

08 Feb '23

Retro Directory - A website to find retro arcades, shops, museums, clubs and more VCF is in here https://retro.directory/

4 6

February Repair Workshop info (2/11 & 2/12)
by Jeffrey Brace 07 Feb '23

07 Feb '23

Signup for February 2023 Repair Workshop here: February 2023 Repair Workshop Signup Sheet <https://docs.google.com/spreadsheets/d/1TIBIkSTCDako3Cl6coDLsaT-H7_kX_jgKb2…> Spaces are first come first serve to the CDL space. Limited space available. Sign up to guarantee a space in your preferred area!!! *DATES*: February 11 & 12, 2023 *LOCATIONS:* InfoAge: 2201 Marconi Road, Wall Township, NJ Building 9059 (CDL Hackerspace - Formerly IXR) TIME: Saturday START time == 10 A.M. END time == 11PM. Sunday START time == 10 A.M. and END == 5 P.M. *COST:* - $15 per person, PER day. This money goes to InfoAge and CDL. - $25 per night for those wanting to stay overnight (Money goes to InfoAge). Please pay ME upon arrival. Cash or PayPal is acceptable as payment. Ask ahead of time if you need to use a credit card. *OVERNIGHT*: Bring your own pillow, blankets, soap etc. We provide a bed frame and an uncovered mattress. There are showers and a kitchen for your use. - You can pay via PayPal to paypal(a)vcfed.org. or to me via cash or credit card in person. *EQUIPMENT:* - VCF will provide a table and you can use any available electrical outlet. - Bring your own tools, power strips, power cords, and supplies etc. - If you need particular tools that you don't own or particular parts, please post to the list for those going. They may have what you need. Let them know ahead of time. - Let everyone know what project you are working on ahead of time to inspire collaboration. *DRINKS*: You should bring your own. We have a refrigerator in CDL to keep them cold. VCF will buy some water and soft drinks for member use. *FOOD*: *Saturday Night Dinner at 7PM*: SIGNUP FOR DINNER RESERVATIONS HERE <https://docs.google.com/spreadsheets/d/1uPXhGjZlyJJ7xuD7sBoplteTDLXAa34svEz…> * Patrick's Grille : https://patricksgrillenc.com/ ADDRESS: 62 W Sylvania Ave, Neptune City, NJ 07753 Please let me know if you are coming, I'm making reservations tomorrow (Thursday) and need a headcount. *Sunday Morning*: OB Diner at 9AM *PARKING:* Park in the main parking lot, unless you are unloading. Don't park on the lawn. QUESTIONS? PHONE: ( 7 3 2 ) 7 2 2 - 5 0 1 5 EMAIL: repairworkshops AT vcfed DOT org Have fun everyone! ========================================= Jeff Brace VCF National Board Member Chairman & Vice President Vintage Computer Festival East Show-runner VCF Mid-Atlantic Executive Director Vintage Computer Federation is a 501c3 charity http://www.vcfed.org/ jeffrey(a)vcfed.org

1 0

Recommendation for a hot air rework station?
by Neil Cherry 07 Feb '23

07 Feb '23

I'm looking to get a hot air rework station for the CDL. I don't need the best but I do want to get a decent station. Any recommendations? Is used a good idea or would it just be a good idea to get new? This was triggered by me having a Microbox II retro board order. Seems the parts are really fine like grains of ground pepper. I think I'm gonna need a bigger magnifier! ;-) -- Linux Home Automation Neil Cherry kd2zrq(a)linuxha.com http://www.linuxha.com/ Main site http://linuxha.blogspot.com/ My HA Blog Author of: Linux Smart Homes For Dummies KD2ZRQ

5 4

Re: [vcf-midatlantic] Recommendation for a hot air rework station?
by Dave McGuire 07 Feb '23

07 Feb '23

Well one doesn't generally use one's fingers when doing surface mount work. -Dave On February 7, 2023 12:59:18 PM Sentrytv via vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org> wrote: > ---------- > Re: [vcf-midatlantic] Recommendation for a hot air rework station? > From: Sentrytv sentrytv(a)yahoo.com > Date: Feb 7, 12:59 PM > To: vcf-midatlantic vcf-midatlantic(a)lists.vcfed.org > > And smaller fingers > > Sent from: > My extremely complicated, hand held electronic device. > >> On Feb 7, 2023, at 12:49 PM, Neil Cherry via vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org> wrote: >> >> ?I'm looking to get a hot air rework station for the CDL. I don't need the best but I >> do want to get a decent station. Any recommendations? Is used a good idea or would it >> just be a good idea to get new? >> >> This was triggered by me having a Microbox II retro board order. Seems the parts are >> really fine like grains of ground pepper. I think I'm gonna need a bigger magnifier! >> ;-) >> >> -- >> Linux Home Automation Neil Cherry kd2zrq(a)linuxha.com >> http://www.linuxha.com/ Main site >> http://linuxha.blogspot.com/ My HA Blog >> Author of: Linux Smart Homes For Dummies KD2ZRQ -- Dave McGuire, AK4HZ New Kensington, PA

2 2