- vcf-midatlantic - lists.vcfed.org

Re: [vcf-midatlantic] Bellmac 32 processor
by Jeffrey Jonas 02 Feb '26

02 Feb '26

I forgot if I posted this before. I found it under email "drafts". The Bellmac32 processor was probably the last processor by AT&T/Western Electric/Bell Labs, following the adventures of the Bellmac-8, Hobbit, Crisp and other processors. It was used in the 3b2 series of minicomputers, a single-board computer, VME card and the AT&T/Teletype 5620 graphics terminal. I chronicled some of it here: http://ferretronix.com/tech/3b2/index.html Wikipedia seems correct with: https://en.wikipedia.org/wiki/Blit_(computer_terminal) The Blit programmable bitmap graphics terminal was designed by Rob Pike and Bart Locanthi Jr. of Bell Labs in 1982. The Blit technology was commercialized by AT&T and Teletype. In 1984, the DMD (dot-mapped display) 5620 was released, followed by models 630 MTG (multi-tasking graphics) in 1987 and 730 MTG in 1989. The 5620 used a Western Electric 32100 processor (aka Bellmac 32) and had a 15" green phosphor display with 800 x 1024 x 1 resolution (66 x 88 characters in the initial text mode) interlaced at 30 Hz. The 630 and 730 had Motorola 68000 processors and a 1024 x 1024 x 1 monochrome display at 60 Hz (most had amber displays, but some had white or green displays).

3 2

MARCH Workshop Cancellation Notice
by Jeff Salzman 02 Feb '26

02 Feb '26

We’re sorry to inform you that the MARCH Repair Workshop planned for February 7–8, 2026 at the InfoAge campus is being canceled. Even though the big snowfall that hit the area was more than a week ago, the persistent freezing temperatures have kept a surprising amount of snow and ice in place... especially in the areas needed for safe public access to the Workshop space. Since InfoAge relies on volunteer staff, and this particular accumulation has been unusually tough to clear, there’s still too much snow and ice covering the areas and paths needed for parking and pedestrian access to the Workshop room. As a result, we’re making the call to cancel the Workshop as a safety precaution. The good news is that we fully expect everything to be cleared or naturally melted well before the next scheduled Workshop on March 21–22, 2026. Thanks for your understanding, and apologies to those who had already signed up. We look forward to seeing you in March. Jeff Salzman VCF/MARCH Workshop Manager VCF Steering Committee

2 1

SATAIM.BAS
by Bart Hirst 01 Feb '26

01 Feb '26

Found this on an 8" floppy tonight. BASIC Rev. 5.1 [CP/M Version] -------------------------------------------------------------------------------- 10 ' THIS PROGRAM A:SATAIM.BAS WAS WRITTEN BY D.C. HARRIS 1/30/82 20 ' 30 ' THIS PROGRAM WILL CALCULATE THE AZIMUTH AND ELEVATION NEEDED TO 40 ' AIM A TVRO ANTENNA TO ENABLE IT TO RECEIVE ANY SATELLITE LISTED 50 ' IN THE TABLES PRINTED BY THIS PROGRAM. YOU MAY ADD OTHER SATELLITE 60 ' OR CITIES IF YOU DESIRE BY ANSWERING THE PROGRAM QUESTIONS. 70 ' 80 ' DATA FOR THE SATELLITIES 90 ' 100 DATA 15 110 DATA COMSTAR 3,-87,WESTAR 3,-91,COMSTAR 2,-95,WESTAR 1,-99,ANIK 1,-104 120 DATA ANIK 2,-109,ANIK 3,-114,SATCOM 2,-119,WESTAR 2,-123,COMSTAR 1,-128 130 DATA SATCOM 3,-132,SATCOM 1,-135,SPARE,0,SPARE,0,SPARE,0 140 ' 150 ' DATA FOR THE CITIES 160 ' 170 DATA 13 180 DATA WASHINGTON D.C.,39,-77,LOS ANGELES,34,-118,NEW YORK,40.5,-74 190 DATA ATLANTA,33.5,-84.5,MIAMI,25.75,-80.25,JACKSONVILLE,30.5,-81.5 200 DATA TAMPA,28,-82.75,ANCHORAGE,60.8,-147,NOME,65,-165 210 DATA LITTLE ROCK,34.75,-92.25,WAYNESBORO,38.1,-78.8,SPARE,0,0,SPARE,0,0 220 ' 230 ' READ THE DATA ABOVE INTO CITY AND SATELLITE ARRAYS 240 ' 250 ' N = NUMBER OF SATELLITIES, SN$( ) ARRAY CONTAINS CITY NAMES 260 ' SN( ) ARRAY CONTAINS LONGITUDES FOR THE CITIES 270 ' M=NUMBER OF CITIES,CN$( ) ARRAY IS CITY NAMES, CL( ) ARRAY IS LATITUDES 280 ' CM( ) ARRAY IS CITY LONGITUDES 290 ' 300 ' FIRST READ SATELLITE DATA 310 ' 320 READ N 330 DIM SN$(15),SN(15),E(15),A(15) 340 FOR I = 1 TO N :READ SN$(I) :READ SN(I) :NEXT I 350 ' 360 ' NEXT READ CITY DATA 370 ' 380 READ M 390 DIM CN$(13),CL(13),CM(13) 400 FOR I = 1 TO M :READ CN$(I) :READ CL(I) :READ CM(I) :NEXT I 410 GOTO 520 420 ' 430 ' THIS IS CURSOR POSITIONING SUBROUTINE FOR BOTTOM LINE ON DISPLAY 440 ' 450 PRINT CHR$(27);CHR$(61);CHR$(52);CHR$(32) 460 PRINT " " 470 PRINT CHR$(27);CHR$(61);CHR$(52);CHR$(32) 480 RETURN 490 ' 500 ' TITLE AND HEADER SECTION 510 ' 520 PRINT CHR$(26) 'CLEAR SCREEN 530 PRINT TAB(10);"THIS IS THE GEOSYNCHRONOUS SATELLITE LOCATION PROGRAM 540 PRINT :PRINT 550 PRINT TAB(10);"WRITTEN 1/30/82 BY D. C. HARRIS. IT WILL LOCATE ANY" 560 PRINT TAB(10);"SATELLITE BY GIVING THE ELEVATION AND AZIMUTH TO AIM" 570 PRINT TAB(10);"AN ANTENNA FROM ANY CITY. SOME CITIES AND SATELLITIES" 580 PRINT TAB(10);"ARE LISTED WITHIN THE PROGRAM AND YOU WILL HAVE THE OPTION" 590 PRINT TAB(10);"OF ADDING ADDITIONAL CITIES AND/OR SATELLITIES" 600 PRINT :PRINT 610 INPUT " PRESS ANY KEY AND <RET> TO CONTINUE ";KB$ 620 ' 630 ' PRINT TABLE OF SATELLITES AND CITIES 640 ' 650 PRINT CHR$(26) 'CLEAR SCREEN 660 PRINT TAB(10);"LIST OF SATELLITES AND CITIES INCLUDED IN PROGRAM" 670 PRINT 680 ' 690 ' FIRST THE LIST OF SATELLITIES AND THEIR POSITIONS 700 ' 710 PRINT TAB(5);"SATELLITIE";TAB(20);"LONGITUDE";TAB(40);"SATELLITE";TAB(55); 720 PRINT "LONGITUDE" 730 FOR I = 1 TO N STEP 2 740 IF SN(I) = 0 THEN 780 750 PRINT TAB(5);SN$(I);TAB(20);SN(I); 760 IF SN(I+1)=0 THEN PRINT " " ELSE PRINT TAB(40);SN$(I+1);TAB(55);SN(I+1) 770 IF SN(I+2) = 0 OR I + 2 > N GOTO 790 780 NEXT I 790 PRINT 800 ' 810 ' NEXT LIST THE CITIES AND THEIR LOCATONS 820 ' 830 PRINT "CITY";TAB(20);"LATITUDE";TAB(30);"LONGITUDE";TAB(40); 840 PRINT "CITY";TAB(60);"LATITUDE";TAB(70);"LONGITUDE" 850 FOR I = 1 TO M STEP 2 860 IF CL(I) = 0 THEN 950 'NO MORE DATA AVAILABLE 870 PRINT CN$(I);TAB(20);CL(I);TAB(30);CM(I);TAB(40); 880 IF I + 1 > M THEN PRINT " " 890 IF I + 1 > M THEN 910 900 IF CL(I+1) = 0 THEN PRINT " " ELSE PRINT CN$(I+1);TAB(60);CL(I+1);TAB(70);CM(I+1) 910 NEXT I 920 ' 930 ' ASK QUESTION TO DETERMINE IF CITIES OR SATELLITIES SHOULD BE ADDED 940 ' 950 GOSUB 450 960 INPUT "WOULD YOU LIKE TO ADD A CITY OR A SATELLITE <YES OR NO> ";KB$ 970 IF LEFT$(KB$,1) <> "Y" AND LEFT$(KB$,1) <> "N" THEN 950 ELSE PRINT 980 IF LEFT$(KB$,1) = "N" THEN 1450 'GO TO CALCULATION AND PRINT 990 GOSUB 450 1000 INPUT "ENTER <BIRD> FOR ADDING SATELLITE OR <CITY> FOR ADDING CITY ";KB$ 1010 IF LEFT$(KB$,1) <> "B" AND LEFT$(KB$,1) <> "C" THEN 990 1020 IF LEFT$(KB$,1) = "C" THEN 1190 'GO GET CITY INPUT 1030 ' 1040 ' GET NEW SATELLITE DATA 1050 ' 1060 PRINT CHR$(26) 1070 FOR I = 1 TO N 'INSERT NEW DATA IN OPEN SPOT IF ANY 1080 IF SN(I) <> 0 THEN 1140 ELSE PRINT 'LOOK FOR NEXT OPEN SPOT 1090 PRINT "ENTER SATELLITE, LONGITUDE (DEGREES AND MINUTES), AND LONGITUDE DIRECTION " 1100 INPUT "USE THE FORM OF <NAME,DEGREES,MINUTES,WEST> ";SN$(I),DG,MN,KB$ 1110 IF (DG < 0 OR DG > 180) OR (MN < 0 OR MN > 60) OR (LEFT$(KB$,1) <> "E" AND LEFT$(KB$,1) <> "W") THEN 1090 1120 SN(I) = DG + (MN/60) :IF LEFT$(KB$,1) = "W" THEN SN(I) = -SN(I) 1130 GOTO 650 'GO AND PRINT NEW SATELLITE AND CITY TABLE 1140 NEXT I 1150 GOTO 1360 1160 ' 1170 ' THIS IS CITY INPUT SECTION 1180 ' 1190 PRINT CHR$(26) 'CLEAR SCREEN 1200 FOR I = 1 TO M 1210 IF CL(I) <> 0 THEN 1320 ' GO FIND EMPTY SLOT FOR NEW DATA 1220 INPUT "ENTER THE NAME OF THE CITY ";CN$(I) :PRINT :PRINT 1230 PRINT "ENTER THE LATITUDE IN DEGREES AND MINUTES FOR ";CN$(I) 1240 INPUT "IN THE FORM OF <DEGREES,MINUTES> ";DG,MN :PRINT :PRINT 1250 IF (DG < 0 OR DG > 180) OR (MN < 0 OR MN > 60) THEN 1220 1260 CL(I) = DG + (MN/60) 1270 PRINT "ENTER LONGITUDE IN DEGREES AND MIN AND DIRECTION FOR ";CN$(I) 1280 INPUT "IN THE FORM OF <DEGREES,MINUTES,WEST> ";DG,MN,KB$ :PRINT :PRINT 1290 IF (DG < 0 OR DG > 180) OR (MN < 0 OR MN > 60) OR (LEFT$(KB$,1) <> "W" AND LEFT$(KB$,1) <> "E") THEN 1270 1300 CM(I) = DG + (MN/60) :IF LEFT$(KB$,1) = "W" THEN CM(I) = -CM(I) 1310 GOTO 650 'GO AND PRINT NEW SATELLITE AND CITY TABLES 1320 NEXT I 1330 ' 1340 ' ARRAYS ARE FULL IF MORE ARE DESIRED YOU MUST CHANGE THE ARRAY SIZES 1350 ' 1360 PRINT CHR$(26) 1370 INPUT "NO MORE DATA ALLOWED DO YOU WANT TO CONTINUE <YES OR NO> ";KB$ 1380 IF LEFT$(KB$,1) <> "Y" THEN END ELSE GOTO 650 1390 ' 1400 ' THIS IS SECTION THAT WILL DO THE CALCULATIONS OF LOOK ANGLES 1410 ' 1420 ' THE FOLLOWING PRINT STATEMENT POSITIONS THE CURSOR TO BOTTOM OF DISPLAY 1430 ' IT IS USED REPEATEDLY TO STAY ON BOTTOM LINE TO KEEP TABLES IN SIGHT 1440 ' 1450 GOSUB 450 1460 INPUT "WHAT CITY ABOVE ARE YOU INTERESTED IN ";KB$ 1470 ' 1480 ' LOOK FOR THE CITY NAME THAT WAS ENTERED 1490 ' 1500 FOR I = 1 TO N 1510 IF KB$ = CN$(I) THEN 1560 1520 NEXT I 1530 GOSUB 450 1540 INPUT "NO MATCH IN TABLE TRY AGAIN TO NAME CITY ";KB$ 1550 GOTO 1500 1560 PRINT CHR$(26) 'CLEAR SCREEN 1570 ' 1580 ' THIS SECTION DETERMINES IF YOU WOULD LIKE A HARD COPY 1590 ' 1600 IFLAG = 0 1610 PRINT CHR$(26) :FOR K = 1 TO 10 :PRINT :NEXT K 1620 INPUT "WOULD YOU LIKE A HARD COPY OF THIS DATA ";KB$ 1630 IF LEFT$(KB$,1) = "Y" THEN IFLAG = 1 1640 PRINT CHR$(26) :FOR K = 1 TO 10 :PRINT :NEXT K 1650 PRINT TAB(20);"!!!!!!!!!! THINKING !!!!!!!!!!" 1660 ' 1670 ' NOW LET'S DO THE CALCULATIONS TO GET ELEVATIONS AND AZMIUTHS OF EACH 1680 ' SATELLITE LISTED IN THE DATA STATEMENTS PLUS THE ONES YOU ADDED 1690 ' 1700 FOR K = 1 TO N 'INCLUDE ALL SATELLITES 1710 IF SN(K) = 0 OR CM(0) THEN 2070 1720 T = SN(K) - CM(I) 'GET DIFFERENCE IN LONGITUDES 1730 TA = ABS(T) 'GET ABSOLUTE VALUE OF DIFFERENCE 1740 IF TA < 180 THEN 1770 1750 TS = SGN(T) 'SAVE SIGN (NEGATIVE OR POSITIVE) OF LONGITUDE DIFF 1760 T = -1 * ((TS * 360) - T) 1770 EP = T 1780 PI=3.14159 :RD=360/(2 * PI) :T=T/RD :CL(I) = CL(I)/RD :EP = EP/RD 1790 H = 35500! :R = 6378 1800 ' 1810 ' COMPUTE MODIFIED RECEIVER LATITUDE 1820 ' 1830 X = SQR(1 - .5 * (COS(CL(I)) + COS(EP))) 1840 ML = 2 * (ATN(X/SQR(-X*X+1))) 1850 ' 1860 ' NOW COMPUTE THE ELEVATION LOOK ANGLE 1870 ' 1880 E(K) = (PI / 2) - (ML + ATN(R * SIN(ML)/(R * (1 - COS(ML) * H)))) 1890 ' 1900 ' NOW COMPUTE THE LOOK AZIMUTH 1910 ' 1920 IF EP = 0 THEN YA = PI 1930 IF EP = 0 THEN 1980 1940 ZA = 1 / TAN(EP/2) :ZB = TAN(CL(I)/2) :YA = ATN(ZA*ZB) + ATN(ZA * (1/ZB)) 1950 ' 1960 ' NOW CONVERT ANGLES BACK TO DEGREES 1970 ' 1980 YA = YA * RD :E(K) = INT(E(K)*RD) :CL(I) = CL(I) * RD 1990 ' 2000 ' CORRECT LOOK AZIMUTH FOR NORTH / SOUTH HEMISPHERE 2010 ' 2020 IF CL(I) < 0 THEN 2060 2030 YA = 360 + YA 2040 A(K) = YA MOD 360 2050 GOTO 2070 2060 A(K) = INT(180 + YA) 2070 NEXT K 2080 ' 2090 ' NOW PRINT THE DATA CALCULATED ABOVE 2100 ' 2110 IF IFLAG <> 1 THEN 2220 2120 ' 2130 ' PRINT HARD COPY HEADER IF SO REQUESTED 2140 ' 2150 LPRINT TAB(20);"LOOK ANGLES FROM ";CN$(I) 2160 LPRINT TAB(15);"LATITUDE = ";CL(I);" LONGITUDE = ";CM(I) 2170 LPRINT :LPRINT :LPRINT "SATELLITE";TAB(15);"AZIMUTH";TAB(25);"ELEVATION"; 2180 LPRINT TAB(40);"SATELLITE";TAB(55);"AZIMUTH";TAB(65);"ELEVATION" 2190 ' 2200 ' PRINT THE CRT HEADER 2210 ' 2220 PRINT CHR$(26) 'CLEAR THE SCREEN 2230 PRINT TAB(20);"LOOK ANGLES FROM ";CN$(I) 2240 PRINT TAB(15);"LATITUDE = ";CL(I);" LONGITUDE = ";CM(I) 2250 PRINT :PRINT :PRINT "SATELLITE";TAB(15);"AZIMUTH";TAB(25);"ELEVATION"; 2260 PRINT TAB(40);"SATELLITE";TAB(55);"AZIMUTH";TAB(65);"ELEVATION" 2270 PRINT 2280 FOR J = 1 TO N STEP 2 2290 IF IFLAG <> 1 THEN 2390 2300 ' 2310 ' PRINT DATA ON HARD COPY TERMINAL 2320 ' 2330 LPRINT SN$(J);TAB(15);A(J);TAB(25);E(J); 2340 IF J+1 > N THEN 2390 2350 IF E(J+1) <> 0 THEN LPRINT TAB(40);SN$(J+1);TAB(55);A(J+1);TAB(65);E(J+1) 2360 ' 2370 ' PRINT DATA ON CRT 2380 ' 2390 PRINT SN$(J);TAB(15);A(J);TAB(25);E(J); 2400 IF J+1 > N THEN 2440 2410 IF E(J+1) <> 0 THEN PRINT TAB(40);SN$(J+1);TAB(55);A(J+1);TAB(65);E(J+1) 2420 IF J+2 > N THEN 2440 2430 IF E(J+2) = 0 THEN 2450 2440 NEXT J 2450 IF IFLAG = 1 THEN LPRINT CHR$(12) 'FORM FEED TO GET PAPER OUT 2460 GOSUB 450 2470 END

3 2

Re: [vcf-midatlantic] Apple-1 Computer Prototype Board #0 sells for 2.7M
by Neil Cherry 31 Jan '26

31 Jan '26

On 1/31/26 7:32 PM, Steve Lagotte via vcf-midatlantic wrote: > All the Apple 1 guys eating up the supply of metal can 2504's, whatever > shall we poor Eventide 1745 caretakers do in the coming shift register > apocalypse ?? Nope we went with the 8DIP. But those are near unobtainium so we're working on different ways to create the same idea. I found some different 16 pin chips but have yet to build a circuit to try it out. I don't think any of the reproduction boards have been using the tin cans unless that's all they could get. I've not seen any (which doesn't mean much). The OP posted prototype from when Woz was fist building the Apple I. That would be a unique computer to have. -- Linux Home Automation Neil Cherry ncherry(a)linuxha.com http://www.linuxha.com/ Main site http://linuxha.blogspot.com/ My HA Blog Author of: Linux Smart Homes For Dummies KD2ZRQ

1 0

Re: Apple-1 Computer Prototype Board #0 sells for 2.7M
by Steve Lagotte 31 Jan '26

31 Jan '26

All the Apple 1 guys eating up the supply of metal can 2504's, whatever shall we poor Eventide 1745 caretakers do in the coming shift register apocalypse ?? > ---------- Forwarded message ---------- > From: Neil Cherry <ncherry(a)linuxha.com> > To: vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org> > Cc: > Bcc: > Date: Fri, 30 Jan 2026 10:40:26 -0500 > Subject: Re: [vcf-midatlantic] Apple-1 Computer Prototype Board #0 sells > for 2.7M > On 1/30/26 10:09 AM, Christian Liendo via vcf-midatlantic wrote: > > Apologies to Corey for spelling his name incorrectly. My mistake. > > > > On Fri, Jan 30, 2026 at 8:14 AM Christian Liendo <cliendo(a)gmail.com> > wrote: > >> > >> Shout out to Cory for the video. > >> > >> > >> > https://www.rrauction.com/auctions/lot-detail/350902407346003-apple-1-compu… > > Vintage Hardware pron! :-) > > Isn't that the prettiest thing! :-) It even has the tin can version of the > 2504. > > I own a 'modern' reproduction. Building one (I have 2 more blanks) is a > pain and expensive. > > -- > Linux Home Automation Neil Cherry ncherry(a)linuxha.com > http://www.linuxha.com/ Main site > http://linuxha.blogspot.com/ My HA Blog > Author of: Linux Smart Homes For Dummies KD2ZRQ >

1 0

REMINDER: MARCH Workshop - FEB 7-8, 2026
by Jeff Salzman 31 Jan '26

31 Jan '26

One more week to go... the next MARCH Workshop on February 7-8, 2026. Signup sheet is here: 2026-2-7 February 7-8, 2026 - Google Sheets <https://docs.google.com/spreadsheets/d/1KhB_4ITqYSqWl_pBR8f8JQF9qah7AyOhUbJ…> General Workshop details can be found here: Repair Workshops @ InfoAge – Vintage Computer Federation <https://vcfed.org/repair-workshops-at-infoage/> Note that the new location on the InfoAge campus for the Workshops is in Building 9010D, and details on that building location are on the Workshop details page above. See you there! Jeff Salzman VCF-MidAtlantic Steering Committee MARCH Workshop Manager

1 0

Re: [vcf-midatlantic] InfoAge Museums closed Wednesday, January 27, 2026
by Steve Lagotte 30 Jan '26

30 Jan '26

I know, right? But it's so hard to get used to, I keep writing January 27th on all my checks ;/ THANK YOU, HERE ALL WEEK, FOLKS On Wed, Jan 28, 2026 at 7:01 AM <vcf-midatlantic-request(a)lists.vcfed.org> wrote: > ---------- Forwarded message ---------- > From: Neil Cherry <ncherry(a)linuxha.com> > To: vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org> > Date: Tue, 27 Jan 2026 22:42:38 -0500 > Subject: Re: [vcf-midatlantic] InfoAge Museums closed Wednesday, January > 27, 2026 > On 1/27/26 10:33 PM, David Gesswein via vcf-midatlantic wrote: > > Subject line had incorrect date. Body was correct. I suspect everybody > understood > > what it was saying. > > Closed Wednesday, oh it's 2026 already ... ;-) > >

1 0

Apple-1 Computer Prototype Board #0 sells for 2.7M
by Christian Liendo 30 Jan '26

30 Jan '26

Shout out to Cory for the video. https://www.rrauction.com/auctions/lot-detail/350902407346003-apple-1-compu…

2 2

InfoAge Museums closed Wednesday, January 27, 2026
by Jeffrey Brace 27 Jan '26

27 Jan '26

Due to the extreme cold and icy conditions on campus the InfoAge Museums (including VCF) will be closed Wednesday January 28, 2026. Take care! Jeff Brace VCF National Board Member Chairman & Vice President VCF East Showrunner VCF Fundraising Manager VCF Evangelist Vintage Computer Federation is a 501c3 charity https://vcfed.org/ <http://www.vcfed.org/> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free.www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

5 4

Re: [vcf-midatlantic] OT: Post on the forums about "Looking for Table Share"
by Bill Degnan 26 Jan '26

26 Jan '26

Dumb question.. tables already all taken? On Sat, Jan 24, 2026 at 2:14 PM RETRO Innovations via vcf-midatlantic < vcf-midatlantic(a)lists.vcfed.org> wrote: > On 1/24/2026 11:08 AM, Sentrytv via vcf-midatlantic wrote: > > > > Subject: > > Re: [vcf-midatlantic] OT: Post on the forums about "Looking for Table > > Share" > > From: > > Sentrytv <sentrytv(a)yahoo.com> > > Date: > > 1/24/2026, 11:08 AM > > > > To: > > vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org> > > CC: > > vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org>, Bart Hirst > > <bart.hirst(a)vcfed.org> > > > > > > > > This sounds like a really interesting exhibit. It would be a shame that > he would not be able to set up his exhibit because of space or table > availability! > > > > Jeff, are there any spaces available for him? > > I know there’s a waiting list. > > I don’t know this person personally, but it seems very interesting. > Maybe somebody can help. > > I am not an ex exhibitor so I do not have any spaces or tables. > > > > Mike > > > > Sent from: > > My extremely complicated, hand held electronic device. > > > >> On Jan 24, 2026, at 11:49 AM, Bart Hirst via vcf-midatlantic< > vcf-midatlantic(a)lists.vcfed.org> wrote: > >> > >> I saw this on the forums, passing it along (no affiliation) > >> > >> > https://forum.vcfed.org/index.php?threads/looking-for-table-share-at-vcf-ea… > > I replied and PMed. I have 2 tables and can share. I agree it sounds > like a neat exhibit and even if not, international exhibits are no doubt > coveted. > > Jim > > -- > RETRO Innovations, Contemporary Gear for Classic Systems > www.go4retro.com > store.go4retro.com >

2 1