- vcf-midatlantic - lists.vcfed.org

Trying to remember a name.
by Jeff S 02 May '22

02 May '22

I am HORRIBLE at remembering names until I use them on a regular basis. That being said, I'm trying to remember the name of someone I was talking to at the last VCF-East event, and perhaps some contact information. That person is probably on this list. If so, I apologize for forgetting your name. All I can provide is a description. He's about 5'5"-5'-7" or so, thin build. Has dark hair and a trimmed beard and mustache.I think he was carrying a shoulder bag with him when he was attending the event. I've seen him plenty of times at various VCF public events, so I know others have seen him around and most likely know him. I was talking with him about the older computing systems like Univac, Eniac and such. I can remember the dialog, but can't even remember his name (did I mention I was HORRIBLE at remembering names). Thanks for any insight, Jeff Salzman

5 5

Re: [vcf-midatlantic] Trying to remember a name.
by Jeff S 02 May '22

02 May '22

That's the guy, I believe. His name stated with an A. On Sun, May 1, 2022, 4:14 PM drummy via vcf-midatlantic < vcf-midatlantic(a)lists.vcfed.org> wrote: > I think I know who you mean.I spoke to him remember his name either. His > first name is short. Something like Ayn or Ain. Maybe

3 4

VCF East 2022 Post Event Survey
by Jeffrey Brace 02 May '22

02 May '22

Hello everyone, For those that attended the show, please fill out this survey so that we may improve the show: https://bit.ly/vcfe2022post. Thanks! ========================================= Jeff Brace VCF National Board Member Chairman & Vice President Vintage Computer Festival East Showrunner Vintage Computer Federation is a 501c3 charity https://vcfed.org/ <http://www.vcfed.org/> jeffrey(a)vcfed.org

1 1

9-track tape deck
by Stephen A Edwards 02 May '22

02 May '22

Someone on Facebook has a reel-to-reel tape for a set of diagnostic programs for a Honeywell mainframe that they'd like to have digitized. Anybody have a working drive?

4 3

ZAPPLE 8080 monitor
by Bill Degnan 02 May '22

02 May '22

Does anyone have a copy of the 8080 version of the ZAPPLE monitor, presumably still called the APPLE monitor program? Bill

2 3

VCF East Clinic kudos
by Crawford Griffith 02 May '22

02 May '22

Folks, I have to give a public Shout Out / Thank You to Jonathan Chapman and Glitch Works for the VCF East 2022 workshop / S-100 Clinic. Jonathan worked tirelessly to get kits built, and S-100 systems fixed, while being incredibly patient even with newbies, tough customers, and some idiot who clogged his desolder station. Highlights were: * Simply seeing 3 IMSAI’s (mine included) in a row on the CDL workbench with one early Altair was a treat. Ryan, Dmitry, and I got to see what other configurations the IMSAI’s had, and swapped known-good parts between us for testing. * Seeing a young woman come in, never having soldered before and seeing her first do a learners kit, then a full-on Glitch project. There was also another young woman there later (Connor’s friend) also doing a kit. * Just seeing people walk in, and say “so, what is all this”? and talk a bit about the CDL, and what we were working on. (Tip for introverts, the end of the front workbench nearest the door make you spokesperson pro tem) Jonathan’s expertise is hard to overstate, and he got my IMSAI operational. Jonathan did all the troubleshooting, and brought up the IMSAI power supply slowly so the electrolytic caps didn’t get all explodey I swapped out some known-bad front-panel switches, then the fun began. I recall there being at least a few badly tarnished TTL chips, and a bad one-shot chip. At least two bad IC sockets, one of which was under front-panel switches - Jonathan showed how the socket could be removed without major surgery. Dmitry loaned a 3 voltage / current limited power supply so boards could be tested *before* plugging into the IMSAI bus. In the end, I had a basic operational system, which is fantastic. Jonathan identified some of my mystery s-100 boards, procured at Trenton ages ago. In fact Ryan had one of them also to test, a video terminal board. Ryan also loaned me his front panel as a swap test, and the extra pair of hands needed for lucite cover re-installation. So, thanks Jon/Glitch! I promise to never clog up your Hakko desolder station ever again! -Crawford

12 18

S-100 linear power supplies
by Martin Flynn 02 May '22

02 May '22

CDL is planning to stock capacitors for linear S-100 power supplies. Looking for suggestions on the values for the 8 volt and +/- 16V rails Martin

3 3

Re: [vcf-midatlantic] VCF East Clinic kudos
by David Gesswein 02 May '22

02 May '22

On Sun, May 01, 2022 at 10:57:16AM +0000, Alexander Pierson via vcf-midatlantic wrote: > While the Nova wasn't 100% after that, it wasn't trying to self-destruct > any more. > Did you find out later what the problem was?

2 1

About that previous message concerning NJ Transit
by Gregg Levine 29 Apr '22

29 Apr '22

Hello! I believe group I was a little rude regarding the bollixed NJ Transit schedule. According to them, the reason why my train for last weekend was deleted was for their work on a bridge. And of course they completely forgot that they were still showing only last year's schedules everywhere. Anyway based, on what I normally work on, I've decided that unless circumstances change, I won't be at the next scheduled repair weekend for NJ. ----- Gregg C Levine gregg.drwho8(a)gmail.com "This signature fought the Time Wars, time and again."

3 2

NJ Transit schedules mixup
by Gregg Levine 29 Apr '22

29 Apr '22

Hello! I am now aware that NJ Transit has gone ahead and created schedules that still do not make sense. For example they show a PDF for 3/26/2020 schedule that contains information I would have used to work out how to get to Belmar and then to Infoage for VCF East last week that would have gotten me there on time. And if that schedule was available in hardcopy last week. Then they still had the ones up from the last part of last year. So as of today Thursday, unless circumstances change that confirm I should be where InfoAge and the CDL location is on the weekend, I am still off for the coming one in July there. ----- Gregg C Levine gregg.drwho8(a)gmail.com "This signature fought the Time Wars, time and again."

1 0