- vcf-midatlantic - lists.vcfed.org

Re: [vcf-midatlantic] Commodore 1702 door
by RETRO Innovations 03 Sep '20

03 Sep '20

And, given the ubiquity of the lack of door on the 1702 in today's collections, I've even considered selling the doors off some of the units I have since I always leave the door open on units in use anyway :-) Jim -- RETRO Innovations, Contemporary Gear for Classic Systems www.go4retro.com store.go4retro.com

5 7

Re: [vcf-midatlantic] Commodore 1702 door
by Jeffrey Brace 02 Sep '20

02 Sep '20

Sounds like an Outer Limits episode where the world was taken apart and remade every moment and sometimes they made mistakes which is why when you lose your keys you find time in a place that you already searched. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> On Wed, Sep 2, 2020 at 1:28 PM Jeff G via vcf-midatlantic < vcf-midatlantic(a)lists.vcfed.org> wrote: > Funny story about the 1702 and door. I have a 1702, that at some point gave > away to a buddy of mine. When I gave it to him, the door was missing. Also > to note, I had a box truck I was using for storage at the time, and its > likely the monitor did time in the truck. > > Years later, he eventually decided he didn't want it anymore and asked if I > wanted it back, with "h-- yeah" as the answer. > > Not too long after that, I cleaned out the box truck to get rid of it, and > lo and behold, I'm not sure where it came from, but I found the missing > door from that monitor. > > So YEARS and even owners apart, yet somehow managed to reunite monitor and > door! The door has the typical broken hinge but I used masking tape to keep > it on for now. > > The end! > > -- JeffG (aka Bags) > -- ========================================= Jeff Brace Vice President & Board Member Vintage Computer Festival East Show-runner Vintage Computer Federation is a 501c3 charity http://www.vcfed.org/ jeffrey(a)vcfed.org cell: 732-759-1783

1 0

Re: Commodore 1702 door
by Jeff G 02 Sep '20

02 Sep '20

Funny story about the 1702 and door. I have a 1702, that at some point gave away to a buddy of mine. When I gave it to him, the door was missing. Also to note, I had a box truck I was using for storage at the time, and its likely the monitor did time in the truck. Years later, he eventually decided he didn't want it anymore and asked if I wanted it back, with "h-- yeah" as the answer. Not too long after that, I cleaned out the box truck to get rid of it, and lo and behold, I'm not sure where it came from, but I found the missing door from that monitor. So YEARS and even owners apart, yet somehow managed to reunite monitor and door! The door has the typical broken hinge but I used masking tape to keep it on for now. The end! -- JeffG (aka Bags)

1 0

RIP Jack Richard
by John Heritage 02 Sep '20

02 Sep '20

Founder of Boardwatch magazine among many other things.. https://www.semissourian.com/story/2831878.html

2 1

Modem banks
by Richard Cini 02 Sep '20

02 Sep '20

All — Long ago I had a MultiTech POTS rack modem bank that I got when I cleaned out part of Temple University’s “elephant graveyard”. Of course, I don’t have it any longer, but I have a project I’m working on that could use one. If anyone has one of these, or the Hayes equivalent, and wants to get rid of it, keep me in mind. It would just have to have at least 8 modem cards. Thanks! Rich http://www.classiccmp.org/cini Long Island S100 User’s Group Get Outlook<https://aka.ms/qtex0l> for iOS

4 7

RIP Curt Vendel
by Jonathan Gevaryahu 02 Sep '20

02 Sep '20

Curt Vendel passed away unexpectedly yesterday, according to Marty Goldberg: https://www.facebook.com/groups/105586892805903/permalink/3497579150273310/ Also see Jason Scott's twitter thread at https://twitter.com/textfiles/status/1300515595788713989 I know many people from VCF East have seen him at prior events or were in communication with him. -- Jonathan Gevaryahu jgevaryahu(a)gmail.com jgevaryahu(a)hotmail.com

7 6

CRX Commodore Expo - This Weekend
by Alexander Jacocks 02 Sep '20

02 Sep '20

All, There’s a virtual Commdore expo going on, this weekend, and it’s free: https://crxevent.com Come join me! - Alex

7 14

Dysan PAT-2+ floppy disk tester/exerciser schematic needed
by Jeff Galinat 01 Sep '20

01 Sep '20

Hi all, I am trying to repair a non-functional Dysan PAT-2+ tester/exerciser thay I got off off eBay and a schematic would go a long way in helping me repair the device. The user manual is online on bitsavers but I have been unable to find a schematic yet. Can anyone help?? Please contact me if you have a lead on the schematic for the PAT-2+.. The schematic for the PAT 1 units are online but the units are very different. Thanks! Jeff Galinat

1 0

Putting the Federation in Vintage Computer Federation
by Adam Michlin 31 Aug '20

31 Aug '20

Hi Everyone, So much has happened in the last 6+ months, all of which has been eclipsed by the pandemic. To start, you can email all of the Steering Committee (SC) Members at: <steering_vcfma(a)vcfed.org> A while I spoke about what a Federation does and I wanted to share with everyone what has been going to make the Federation even more of a Federation. Some of this will be formally documented in the upcoming by-laws and some is just cool news of all the collaborations going on between various vintage computer groups and our progress towards opening up VCF resources to the membership at large. Artifact Sale and Checkout: We are very aware that much of the equipment in the warehouse needs a significant amount of TLC. To that end, we have set up a system where anyone can request an artifact for checkout. Checkout can be for repair, restoration, or just because you need to borrow it for some reason. In all cases, checking out an artifact will require a reasoning, approval of a majority of the 5 member SC and you will have to sign something. The SC will consider the nature of the request, the purpose of the request, and the person requesting. For obvious reasons, we cannot guarantee a yes to every request. We are also doing everything in our power to protect any repaired/restored artifacts from the elements in the warehouse when they are returned as the most commonly asked question we get is "why clean it if it is just going back to the dirty warehouse?". This makes official an unofficial policy we've been experimenting with over the last few months. Ian Primus and Bill Lange, in particular, are doing some great work restoring terminals (ADM-2 and Teletype (CRT) Model 40) and Atari equipment (most notably Atari Mega STe now on display in the museum with keyboard provided by Dean Notarnicola) respectively. And if you want to come to a workshop and work on something bigger, make a proposal. Bill Inderrieden, for example, has been doing meticulous and awe inspiring work in documenting the Wang Minicomputer in the museum and hopefully getting it up and running. A whole host of people who will be named later in this post have been getting one of our Xerox Stars working. Feel free to think big! We felt sale of artifacts deserves a higher burden, so sale of artifacts requires a SC supermajority vote (4/5). Note, this is to purchase something that has not already been designated as surplus since surplus is already approved for sale. It will be a lot... and we mean a lot... more difficult to get non-surplus items to purchase from the warehouse since we are working very hard to proactively identify surplus equipment for sale. For obvious reasons, it should be expected the answer will most commonly be no for these requests, but everyone is allowed to make a request. You'll also see a lot more stuff naturally coming up for sale as surplus, though. If you are interested in buying, repairing, restoring , or just borrowing something, email one or all of the Steering Committee members and we will take it from there. The Warehouse: As some people have heard, we are directing all funds generated by surplus sale to an account dedicated to climate controlling and otherwise updating the warehouse. This project has been a dream for so many of us for years and it is starting to become a reality. Donations to this end are most graciously appreciated, too. Other Groups: So many great things. I stopped by System Source in Maryland (you must go!) on the way down to South Carolina and we now have someone (Ryan Schiff) who is interested in restoring the Cray in the museum (owned by LSSM and Dave McGuire - on loan to us - he has approved the initial investigation). How cool will it be to even possibly have a working Cray in the museum? Power, you say? First world problems we will deal with! And to have people from three museums involved!? We're working on a deal to swap an extra Apple II+ and Mac 512K with the Homecomputermusuem in the Netherlands for an Exidy Sorcerer and a ZX Spectrum. Two machines common in the US that we are swapping for two machines common in the UK that we don't have. Hopefully the first of many trades as one of the things we lack are non US computers (most of the international machines in the museum are on loan from members). A Xerox Star mouse has been found through a private party connected to us via the Computer History Museum in Mountain View. The person donating wishes to remain anonymous. I personally am most excited by this (and the work done by David Gesswein, Ian Primus and countless others to get the thing to work in the first place!). A working Xerox Star in a museum where museum goers can put hands on. Mind blowing. And, finally, which I think I've posted on already, this all started with the loan of working Canon Cat (sitting in a plastic bin in the warehouse - boo!) to Kennett Classic (on display for people to use - yay!). Our general philosophy going forward is that we can't display everything, so it makes much more sense to loan out artifacts for the world to see (and repair!) than to have artifacts sit in the warehouse (climate controlled or not). Everything is now backed by a formal process, though, so we have checks and balances and really want to encourage people and organizations who have never asked before to consider asking. Is there something we haven't thought of? Let us know! Best wishes, -Adam

4 3

VCF East 2020 Classroom Instructors Needed
by Jeffrey Brace 31 Aug '20

31 Aug '20

We still have room for classroom instructors. Signup now to reserve your spot. They are filling up fast: < https://docs.google.com/forms/d/e/1FAIpQLSfaLdF8TOlIicNw9Qwi7Bkfz8OjCZm4YWl… > The class will be a maximum of 30 minutes. We are going to be doing a virtual hybrid show on October 10 & 11. *CLASSES* Classroom instructors will teach something like "How to repair a CRT", or "Commodore 64 assembly programming". Here is an example class for "Advanced 6502 Assembly Programming for the Apple II" by Stephen Edwards: https://www.youtube.com/watch?v=lXElw_3t-rM&t=21s If you are interested in being a classroom instructor, then please fill out this form: Availability is limited. You have the choice of: 1) A prerecorded video with a maximum 30 minutes. Submitted video of your class by September 21. This will be shown via YouTube live and then there will be live Q & A for 10 minutes. 2) An in-person presentation of 30 minutes on site at InfoAge with 10 minutes live Q & A. I will send more details if you are interested. -- ========================================= Jeff Brace Vice President & Board Member Vintage Computer Festival East Show-runner Vintage Computer Federation is a 501c3 charity http://www.vcfed.org/ jeffrey(a)vcfed.org cell: 732-759-1783

1 0