- vcf-midatlantic - lists.vcfed.org

Re: [vcf-midatlantic] Tandy 6000
by Dean Notarnicola 11 Jan '19

11 Jan '19

Of course, you are correct. I have a Gotek handy. Do you happen to know if the flashfloppy firmware makes it compatible with the 6000? - Dean On Fri, Jan 11, 2019 at 1:39 PM Peter Cetinski via vcf-midatlantic < vcf-midatlantic(a)lists.vcfed.org> wrote: > It’s 19 disks for Xenix 3.2 with the 3.0 dev system, Dean! :) You really > want that because without it Tandy Xenix is mostly just a runtime system. > A few of the install disks are double sided as well. > > I highly recommend getting an HxC floppy emulator for the 6000. The full > Xenix install will push your TM-848 drive to the max. > > Also a good idea to image the diagnostics disk first so you can run the > full test suite of 68k diags before attempting the Xenix install. > > Pete > > > On Jan 11, 2019, at 1:29 PM, Ian Primus via vcf-midatlantic < > vcf-midatlantic(a)lists.vcfed.org> wrote: > > > > I can bring my disk imaging setup, which can write those disks. > > > > -Ian > > > > On Friday, January 11, 2019, Dean Notarnicola via vcf-midatlantic < > > vcf-midatlantic(a)lists.vcfed.org> wrote: > > > >> I'll be bringing a Tandy 6000 to the workshop in addition to the Mac > Color > >> Classic II that I'll be attempting to restore. Would anyone have a set > of > >> TRSDOS II 4.2/4.3 or TRS-Xenix 3 (preferably) disks? I have some blank > 8" I > >> can use to copy them, or I'd be very happy to compensate someone for a > set > >> of one or both. > >> > >> - Dean > >> >

2 1

Re: [vcf-midatlantic] Working PATA IDE drive needed 250-500 gig
by Tony Bogan 11 Jan '19

11 Jan '19

I have a couple western digital 250GB drives still sealed, I’ll bring them with me. Tony Sent from my iPhone > On Jan 11, 2019, at 1:39 PM, Sentrytv via vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org> wrote: > > <mime-attachment>

1 0

Tandy 6000
by Dean Notarnicola 11 Jan '19

11 Jan '19

I'll be bringing a Tandy 6000 to the workshop in addition to the Mac Color Classic II that I'll be attempting to restore. Would anyone have a set of TRSDOS II 4.2/4.3 or TRS-Xenix 3 (preferably) disks? I have some blank 8" I can use to copy them, or I'd be very happy to compensate someone for a set of one or both. - Dean

3 3

Working PATA IDE drive needed 250-500 gig
by Sentrytv 11 Jan '19

11 Jan '19

Looking for a couple of working drives to expand XBOX storage Seagate, WD, Maxtor should all work If anyone has spares I'll be at workshop tomorrow 10-5 Mike Rosen Sent from: My extremely complicated, hand held electronic device.

1 0

Re: [vcf-midatlantic] vcf-midatlantic Digest, Vol 8, Issue 11
by David Hoelzer 11 Jan '19

11 Jan '19

If you aren't able to get things going at the workshop, reach out to me directly. I have an Indigo (green 10k), Octane, and O2 happily running. I can also help you out with Irix installs and other misc. software, especially with Nekochan gone. On 1/11/19 12:00 PM, vcf-midatlantic-request(a)lists.vcfed.org wrote: > Message: 10 > Date: Fri, 11 Jan 2019 09:20:44 -0500 > From: Adam Michlin<amichlin(a)swerlin.com> > To:vcf-midatlantic@lists.vcfed.org > Subject: [vcf-midatlantic] SGI Indigo help at tomorrow's workshop > (Saturday) > Message-ID:<91327c9a-5ded-f18e-6a97-f9ac383852fc(a)swerlin.com> > Content-Type: text/plain; charset=utf-8; format=flowed > > Hi Everyone, > > I'm bringing my SGI Indigo to the workshop. Known working CPU, keyboard, > RAM and hard drives. Possibly working mouse (likely). Two appropriate > CD-ROM drives that don't seem to work (with caddies). > > I'm just trying to get IRIX installed so I can do some MIPS programming > on real hardware. If any one can bring appropriate installation CDs and > a known working external CD-ROM, it would be greatly appreciated. > > Thanks, > > ???? -Adam

1 0

Looking for Tandy 1000 EX HX computer / parts
by Blake Patterson 11 Jan '19

11 Jan '19

I have a 1000HX I recently picked up on Craigs and have a few upgrades waiting for parts to expand. Sadly, the case is cracked pretty notably and I'm looking to replace the case. But, what I am most looking for is the proprietary Tandy "PLUS" RAM expansion board for the EX or HX. Does anyone have anything along these lines? Thanks. bp -- Heisenberg may have slept here.

1 0

Interesting auction, upstate NY
by Jameel Akari 11 Jan '19

11 Jan '19

Paging Ian Primus... There are a few interesting things in this auction that's near me. Starting around lot # 151 https://www.collarcityauctionsonline.com/servlet/List.do?auctionId=465&page… What happened to that Apple II looking machine? Today somebody pointed this beast out to me, further down: https://www.collarcityauctionsonline.com/servlet/List.do?auctionId=465&page… IBM 3420 tape unit. I feel like it was NYS DMV surplus. I'm not sure what I'd do with it, or even that I can move it, but... More seriously, I'm thinking about the Mac Portables and maybe the IBM portable lot; my wife has bid on some non-computer items already. So we're probably going to go pick *something* up. Let me know if you see something interesting and maybe we can make this happen. Anything more than a couple wagon-sized-car-loads will be challenging but not impossible. -- Jameel Akari

4 4

Repair Day Next Sat 12th - What to expect?
by dillera＠gmail.com 11 Jan '19

11 Jan '19

Just a notice that I'll be bringing a bunch more stuff to give away or sell for $10 max at the repair day. Some Atari 8bit stuff, odds and Ends, Monitors (Commodore) and extra junk that is useful but that I will never use. Trades are accepted first before I give any away or sell - so if you have something interested and Unixy, bring it and lets see what we have. Anyone that can help me with fixes will also get first dibs on the give-away stuff. I'll also be bringing a SunU10 to try and get it to boot, An Apple IIFX to try and re-cap, and some PS to try and recap, assuming I get the caps. And a Tandy 600 that won't turn on. Looks like i'll be bringing my A2000 and try to copy some floppies for another member. I'm not that awesome w/ soldering, mostly due to lack of experience. I'm bringing my own soldering iron. This will be my first one- just want to check and make sure what is going to happen will happen - is the main room used like at Festivus? Assuming that ppl that come must bring everything they need for work, or are there things there from VCF to use? (Irons, monitors, network etc) ? Thanks! -andy

7 6

Re: [vcf-midatlantic] Repair Day Next Sat 12th - What to expect?
by Blatboy 11 Jan '19

11 Jan '19

I have a simple little logic probe I can bring. :) - Walter ++++++++++++++++++++++ https://jwalterhawkes.com like to know where/when I'm playing? Click here <https://jwalterhawkes.com/contact> to sign up for my list, and let the babble begin. Date: Thu, 10 Jan 2019 09:59:50 -0500 From: Joseph Oprysko <joprysko1(a)gmail.com> To: vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org> Subject: Re: [vcf-midatlantic] Repair Day Next Sat 12th - What to expect? Message-ID: <CAPXecpDwun06RDZbJoPOu3cvO3ofC-OgRCSqsBYMbPi6T0xFEw(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Okay. Well the scope is an overkill replacement when just trying to do some quick probing. But the scope should be able to tell me what I need. Thanks On Thu, Jan 10, 2019, 9:53 AM Evan Koblentz via vcf-midatlantic < vcf-midatlantic(a)lists.vcfed.org wrote: > >> Is there an oscilloscope and a logic probe available for use? > > VCF has a scope. We don't have a logic probe.

1 0

Looking for Tandy 2000 floppy bezel
by Richard Cini 11 Jan '19

11 Jan '19

All – I’m adding a second floppy drive (a non-vintage 3.5” drive) to my recently-restored T2K and in the process, I realize that it needs a different floppy bezel for two drives. Would anyone have a spare/extra that they could bring with them on Saturday to the workshop? If so, let me know. Thanks! Rich -- Rich Cini http://www.classiccmp.org/cini http://www.classiccmp.org/altair32

1 0