- vcf-midatlantic - lists.vcfed.org

FS: Solid State Music VB1B S100 Video Interface Tested/Working
by Systems Glitch 17 Jan '16

17 Jan '16

Link: http://www.ebay.com/itm/272108256416 This one came in a project Altair, I've already got one and don't need a second. Fully tested in my IMSAI 8080 with an Apple Monitor II composite monochrome monitor. Works with the IMSAI front panel, too! Very low serial number -- B66. There might be a custom character generator ROM in this one, it doesn't have the standard Motorola part number. Could be a house number for all I know. It does generate ASCII properly, as shown. Includes a pigtail for the composite video connector. Thanks, Jonathan

1 0

CF, SD, or other modern media replacements used for vintage systems
by Joseph Oprysko 17 Jan '16

17 Jan '16

For my VCF East display this year I'm planning on presenting various modern media replacements used on vintage systems, I have access to a couple different methods for various systems, but would like to hear what you have and use, and for what systems. I'd like to have a variety of different types shown, so it doesn't look like I'm favoring one specific type (otherwise I would just have the ones for the Mac/Apple II systems) and a multicart for a video game system (Sega Genesis) I know on eBay I saw a device for the Commodore called the SDrive 1564. I'd like to have a variety of the different floppy drive "replacements" that people have come up with and marketed to be able to show people ease of use with traditional hardware, speed, compatibility, etc. If anyone has any such devices that I would be able to borrow for the festival, it would be greatly appreciated. Message me privately if you do, as it would likely lead to off topic conversations. Thank you, Joseph Oprysko -- Normal Person: Hey, it seems that you know a lot. Geek: To be honest, it's due to all the surfing I do. Normal Person: So you go surfing? Normal Person: But I don't think that has anything to do with knowing a lot... Geek: I think that's wrong on a fundamental level. Normal Person: Huh? Huh? What?

1 0

Infoage outside ramp doors
by Herb Johnson 17 Jan '16

17 Jan '16

> Guys, please be conscientious about closing BOTH sets of the outside > ramp doors while at the workshop next weekend. .... > Whatever happens, DO NOT prop open the doors (unless you want > InfoAge to send you the heating bill) ... thanks in advance. In my years of visiting InfoAge, "props" on doors seems to be the method of choice. It was mentioned recently, that an old bubble iMac has been used for years to prop open a door. (InfoAge is a large site with many connected buildings.) A simple response. Why not fix the doors, so they can be opened from the outside without prop-ing them? Either better locks, or fix the jamming, or better "props" which still seal the door, or add a doorbell to fetch help. And post a sign inside the doors to enforce your rule. Such rules are reasonable - fire code for instance - but it's also reasonable to accommodate your guests. If this is a serious enough issue to post a public request about it; it was worth my attention to respond thoughtfully, to suggest the problem be solved. Herb Johnson -- Herbert R. Johnson, New Jersey USA http://www.retrotechnology.com OR .net

2 1

Canon T1i
by Joseph Oprysko 16 Jan '16

16 Jan '16

Does anyone here know how to do camera repair? I have a Canon T1i, I need the SD module replaced, too many tiny parts and small screws for my shaky hands. LOL Plus I just don't have the skillset to do it. -- Normal Person: Hey, it seems that you know a lot. Geek: To be honest, it's due to all the surfing I do. Normal Person: So you go surfing? Normal Person: But I don't think that has anything to do with knowing a lot... Geek: I think that's wrong on a fundamental level. Normal Person: Huh? Huh? What?

4 5

Fundraiser accomplished :)
by Evan Koblentz 16 Jan '16

16 Jan '16

And just like that, the final $20 arrived. Thank you to everyone who contributed and who helped by sharing our announcement on social media. Corey C. will send formal thank-you notices. The IRS requires us to send acknowledges for all gifts of $75 and up; we'll try to send them for all gifts of any amount. The new display furniture is going to be very nice. Basically we're using wire shelving, as in the warehouse, but in a whole other design not intended by the manufacturers. Kind of how you'd get Legos as a kid, ignore the instructions, and build whatever you want. :) We ordered some individual components in order to make one demo unit. I will share a picture when the demo unit is built. Then we'll place the big order and have a build-a-thon in the new museum space.

3 4

Heating @ workshop next weekend
by Evan Koblentz 15 Jan '16

15 Jan '16

Guys, please be conscientious about closing BOTH sets of the outside ramp doors while at the workshop next weekend. We all have a bad habit of leaving one/both sets of those doors ajar, which is a bad idea in winter. Please close the doors even if you're just going to your car and back. Whatever happens, DO NOT prop open the doors (unless you want InfoAge to send you the heating bill) ... thanks in advance.

1 0

WTB: Altair Dress Panel, Any Version
by Systems Glitch 15 Jan '16

15 Jan '16

All, I'm looking for a dress panel for an Altair 8800B. Ideally, I'd like to put an 8800B dress panel on it. Turns out that the 8800 dress panel fits fine, though, so that would be acceptable too. Original, reproduction, a little beat up, doesn't matter. If it's an 8800 style dress panel, I'd like the metal strip that goes along the bottom, but it's not critical. I'm also looking for the metal strip for the 8800 -- I've got one that didn't come with the strip. Thanks, Jonathan

1 0

Re: [vcf-midatlantic] Nixie tubes
by VAXman＠tmesis.org 15 Jan '16

15 Jan '16

Joseph Oprysko via vcf-midatlantic writes: >Would anyone happen to have a supply of Nixie tubes? I'd like to build >either a clock or maybe an 8 digit calculator if I have enough tubes. >Although not sure if I would use a microcontroller like arduino or if >I'd build the logic from the ground up. I have a nice 1974 Panasonic >830 4 function calculator (add/subtract/multiply/divide) and that's it, >not a nixie based calc though. > >If you have some tubes, message me off list and we will chat. Are 74(1)41s still made or available?

3 2

Nixie tubes
by Joseph Oprysko 15 Jan '16

15 Jan '16

Would anyone happen to have a supply of Nixie tubes? I'd like to build either a clock or maybe an 8 digit calculator if I have enough tubes. Although not sure if I would use a microcontroller like arduino or if I'd build the logic from the ground up. I have a nice 1974 Panasonic 830 4 function calculator (add/subtract/multiply/divide) and that's it, not a nixie based calc though. If you have some tubes, message me off list and we will chat. Joe -- Normal Person: Hey, it seems that you know a lot. Geek: To be honest, it's due to all the surfing I do. Normal Person: So you go surfing? Normal Person: But I don't think that has anything to do with knowing a lot... Geek: I think that's wrong on a fundamental level. Normal Person: Huh? Huh? What?

2 1

I'm so ready to troubleshoot my vintage computers
by Joseph Oprysko 15 Jan '16

15 Jan '16

With my vintage Heathkit IM1212 Nixie Tube Multi-Meter. -- Normal Person: Hey, it seems that you know a lot. Geek: To be honest, it's due to all the surfing I do. Normal Person: So you go surfing? Normal Person: But I don't think that has anything to do with knowing a lot... Geek: I think that's wrong on a fundamental level. Normal Person: Huh? Huh? What?

1 0