November 2020 - vcf-midatlantic

Commodore 1702 door
by svcatitc＠aol.com 21 Apr '23

21 Apr '23

Jeffrey Brace jeffrey at vcfed.org Writes:Wed Sep 2 13:48:24 EDT 2020 Sounds like an Outer Limits episode where the world was taken apart and remade every moment and sometimes they made mistakes which is why when you lose your keys you find time in a place that you already searched. I thought this was a Spielberg "Amazing Stories" episode, obviously not. The episode is: "A Matter of Minutes" is the third segment of the fifteenth episode from the first season (1985–86) of the television series The Twilight Zone. See: https://en.wikipedia.org/wiki/A_Matter_of_Minutes I remember that scene where the couple is in the "Void of White Space" and the "Supervisor of the Maintenance of Time" says: (paraphrasing) "Ya know how you go back to look for something you know is supposed to be there multiple times and then it finally is where you thoughtit should be? That's us. We forgot something. We are now working on moving Christmas!" I personally call them the "Minute-Ahead" men and you may hear me at a workshop cursing at them!!!! I DOOO BELIEVE! Bill Inderrieden

1 1

Re: [vcf-midatlantic] Ordering Snark Barker MCA (Sound Boaster clone) PCBs -- Want One?
by Alexander Jacocks 21 Jan '21

21 Jan '21

Thanks, Z. Did you already build one? - Alex On Mon, Nov 30, 2020 at 17:32 Alexander Pierson via vcf-midatlantic < vcf-midatlantic(a)lists.vcfed.org> wrote: > The Snark Barker MCA does have a limited number of surface mount > components, namely the CPLD, associated voltage regulator, and some > capacitors. Everything else is thru-hole. > Meanwhile, the ISA Snark Barker is fully thru-hole. > -Alexander 'Z' Pierson On Monday, November 30, 2020, 04:55:15 PM EST, > Alexander Jacocks via vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org> > wrote: > > Bill, > > This is a build-it-yourself project. The Snark Barker is an exact clone, so > it's exclusively through hole. > > Only the PCB is included. If others wanted, I could source the parts > necessary, but I'd need at least a few others interested. > > - Alex > > On Mon, Nov 30, 2020 at 7:38 AM Bill Degnan via vcf-midatlantic < > vcf-midatlantic(a)lists.vcfed.org> wrote: > > > Would the assembly be surface mounted or original? > > Bill > > > > On Sun, Nov 29, 2020, 8:43 PM Jameel Akari via vcf-midatlantic < > > vcf-midatlantic(a)lists.vcfed.org> wrote: > > > > > $34 I assume is just the board? > > > > > > I’ll take a look at the details tomorrow but this might be fun. > > > > > > -- > > > Jameel Akari > > > > > > > On Nov 29, 2020, at 8:17 PM, Alexander Jacocks via vcf-midatlantic < > > > vcf-midatlantic(a)lists.vcfed.org> wrote: > > > > > > > > All, > > > > > > > > I'm in the process of ordering PCBs for the Snark Barker MCA > > > > (microchannel), which was just announced, here: > > > > https://twitter.com/TubeTimeUS/status/1333123576346468352 > > > > > > > > The design files and BOM can be found here: > > > > https://github.com/schlae/snark-barker-mca > > > > > > > > I'll be ordering from PCBway, who does gold fingers, so that the > boards > > > > will be able to be able to be repeatedly inserted, without wearing > out > > > the > > > > contacts. > > > > > > > > Is anyone else interested? The cost (at quantity 5) would be about > > > > $34+shipping, per PCB. The cost should go down with a bigger order, > > > should > > > > more than 4 others want boards. I could probably be convinced to make > > the > > > > parts order, as well, if folks want. > > > > > > > > Thanks! > > > > - Alex > > > > > > > > >

4 6

Re: [vcf-midatlantic] Televideo Model 925
by Bill Degnan 18 Dec '20

18 Dec '20

gotcha On Mon, Nov 23, 2020 at 10:23 AM Bob Aviles via vcf-midatlantic < vcf-midatlantic(a)lists.vcfed.org> wrote: > Hi Bill, > Yes, I know you moved. I will probably make it next year, my wife not > letting go anywhere.Thanks for the invite and Happy Thanksgiving. > Bobby > On Monday, November 23, 2020, 07:32:43 AM EST, Bill Degnan via > vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org> wrote: > > Bobby, > Note back then that was the Wilmington Del. repair shop, now my business is > located in Kennett Square, PA. Kennettclassic.com for hours and location. > You'll need to make an appointment because I will need prep time to.set up > the Compupro and terminal. Do you have 8" drive(s), cables and boot media? > Bill > > On Sun, Nov 22, 2020, 10:28 PM Bob Aviles via vcf-midatlantic < > vcf-midatlantic(a)lists.vcfed.org> wrote: > > > Hi Bill, > > Just got the system need to check cards and other stuff, will get back > > to you on the null modem?I once went up to your store to buy a radio > shack > > monitor years ago. > > ThanksBobby > > On Sunday, November 22, 2020, 04:27:53 PM EST, Bill Degnan via > > vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org> wrote: > > > > Any terminal will work, or a computer running comm software. If you're > > going the comm software router, to start, avoid using a usb to serial > > adapter and try to use a true serial port until you're sure the computer > is > > working with a serial terminal. I have used all kinds of things with a > > Compupro; Zenith, > > > > Just a question whether you need a null modem or not, I dont recall. > Does > > it have the Interfacer card? > > > > On Sun, Nov 22, 2020, 3:40 PM Bob Aviles via vcf-midatlantic < > > vcf-midatlantic(a)lists.vcfed.org> wrote: > > > > > Hi, > > > > > > I am looking for a Televideo model 925 terminal with keyboard, 115/230V > > > for my CompuPro S100 that I just received or any other type that works > > with > > > the CompuPro S100 systems. Questions does anyone known if the Zenith > > EasyPC > > > keyboard with work with the Compupro S100? > > > > > > > > > Thanks > > > Bobby > > > > > > > > > > > > > > >

2 1

Ordering Snark Barker MCA (Sound Boaster clone) PCBs -- Want One?
by Alexander Jacocks 01 Dec '20

01 Dec '20

All, I'm in the process of ordering PCBs for the Snark Barker MCA (microchannel), which was just announced, here: https://twitter.com/TubeTimeUS/status/1333123576346468352 The design files and BOM can be found here: https://github.com/schlae/snark-barker-mca I'll be ordering from PCBway, who does gold fingers, so that the boards will be able to be able to be repeatedly inserted, without wearing out the contacts. Is anyone else interested? The cost (at quantity 5) would be about $34+shipping, per PCB. The cost should go down with a bigger order, should more than 4 others want boards. I could probably be convinced to make the parts order, as well, if folks want. Thanks! - Alex

5 6

UPS (Uninterruptible Power Supplies) was: How's Everyone Doing
by Jeffrey Brace 30 Nov '20

30 Nov '20

I decided to make a new thread since there is a lot of interest in this topic, etc. @Dave Mcguire. Thanks for the tip on where to buy replacement batteries. As far as I know APC is the most recommended brand. I see others are using Panasonic. I'm curious to know which brands everyone recommends or discourages? On Fri, Apr 24, 2020 at 1:02 PM Mike Loewen via vcf-midatlantic < vcf-midatlantic(a)lists.vcfed.org> wrote: > On Fri, 24 Apr 2020, Ethan O'Toole via vcf-midatlantic wrote: > > > I used to work for a large music streaming provider and we had thousands > and > > thousand of servers. The data center would put out a notice that they're > > going to do UPS maintenance or Switchgear maintenance... and usually > that > > night we would have maybe up to 20 servers have issues. Hard hang or > maybe a > > reboot. Meanwhile everything looked okay. > > At one point, I had a production server in the data center, an IBM > RS6000 > with redundant power supplies (2). The techs were moving systems to a > different power bus and unplugged one of the supplies: my system promptly > shut > down. It turned out that my system required THREE power supplies before > redundancy was in effect. Oops. > > > Mike Loewen mloewen(a)cpumagic.scol.pa.us > Old Technology http://q7.neurotica.com/Oldtech/ > -- ========================================= Jeff Brace Vice President & Board Member, VCF East Showrunner Vintage Computer Federation http://www.vcfed.org/ jeffrey(a)vcfed.org -- ========================================= Jeff Brace Vice President & Board Member, VCF East Showrunner Vintage Computer Federation http://www.vcfed.org/ jeffrey(a)vcfed.org

4 5

VCF -MA Committee Member Election Begins
by Dean Notarnicola 29 Nov '20

29 Nov '20

With this email, the committee member election has begun. Please click the following link and carefully read the directions to properly record your vote for the two open seats: https://docs.google.com/forms/d/e/1FAIpQLSdmBX-tQhZuDIs6fiYPPfB5xUPiiWOzovn… Voting commences immediately and closes at 11:59 pm on December 6th. Winners will be announced December 12th at the annual VCF Festivus celebration. More information here: http://vcfed.org/wp/2020-elections-for-steering-committee/ <https://www.google.com/url?q=http://vcfed.org/wp/2020-elections-for-steerin…> Please ensure that you enter the same email address below that you use for the VCF MidAtlantic Listserv. If you do not use the same email address your vote will not be valid. Only one vote per email address will be recorded. If more than one vote is made, only the last one will be accepted. Thank you all for participating! Regards, Dean Notarnicola VCF-MA Committee Chairperson

3 2

Attic finds :-)
by Neil Cherry 28 Nov '20

28 Nov '20

1 - PT68K-2 loads with OS9 2.3 (I think it's OSK at this point) 3 - I8039 & 8243 <- Wierd, not a chip I typically worked with 1 - NSC8073 Tiny Basic chip 3 - I8052, I think these have BASIC on them 1 - 68020-12 & 68881-12 1 - PEP Eurobus system (68K, 10 serial, 1 LPT, 720K? 5 1/4 Floppy, 20M Hard Disk) 2 - 8088 XT mother boards (?), I never had a DOS system other than my work machines I have to search for my Hercule Video Card. Not sure where that is. I have found my other PT68K-2 with Humbug/OS9 roms. I'll need to replace the 48T08 chips or just drop in 6116 (100 ns) so I can start playing. The PT68K-2 is in an AT case with an AT Power Supply. It must weigh at least 40 pounds. If the floppy drives are belt driven then they're useless but I think this is when the first pancake drives arrived. This system has a 720K 5 1/4 & a 720K 3 1/2. Anyone know the best way to resurrect an old hard drive that hasn't run in at least 30 years? What I didn't find my other 6809 boards or my parts for building those 35 year old boards. I have them somewhere. -- Linux Home Automation Neil Cherry ncherry(a)linuxha.com http://www.linuxha.com/ Main site http://linuxha.blogspot.com/ My HA Blog Author of: Linux Smart Homes For Dummies

3 3

Re: [vcf-midatlantic] 1702 eproms (Bill Degnan)
by Bill Degnan 27 Nov '20

27 Nov '20

All...thanks for your replies and suggestions. I bought a batch from Jeff G. Bill D On Thu, Nov 26, 2020, 1:46 PM MikeWillegal via vcf-midatlantic < vcf-midatlantic(a)lists.vcfed.org> wrote: > If you can’t find them elsewhere, I’ve had good luck with the supply from > Unicorn Electronics. > > regards, > Mike Willegal > > > > I am looking for 8 or so 1702A eproms if anyone has some for sale but I > > will buy more if the price is right. They do not have to be > rare/ceramic. > > I will pay more for tested / readable. > > > > Please contact me privately if you have a tube of these avail via > > https://vintagecomputer.net/contact.cfm. > > > > I may also need 2708's. > > > > Shipping to Landenberg, PA. > > > > Thanks > > > > Bill Degnan > > > > > > > >

1 0

Happy Thanksgiving to All!
by Jeffrey Brace 27 Nov '20

27 Nov '20

I hope that everyone had a safe, happy and healthy Thanksgiving and I hope that you didn’t stuff yourself too much and had room for dessert! -- ========================================= Jeff Brace Vice President & Board Member Vintage Computer Festival East Show-runner Vintage Computer Federation is a 501c3 charity http://www.vcfed.org/ jeffrey(a)vcfed.org cell: 732-759-1783

3 2

Re: 1702 eproms (Bill Degnan)
by MikeWillegal 27 Nov '20

27 Nov '20

If you can’t find them elsewhere, I’ve had good luck with the supply from Unicorn Electronics. regards, Mike Willegal > > I am looking for 8 or so 1702A eproms if anyone has some for sale but I > will buy more if the price is right. They do not have to be rare/ceramic. > I will pay more for tested / readable. > > Please contact me privately if you have a tube of these avail via > https://vintagecomputer.net/contact.cfm. > > I may also need 2708's. > > Shipping to Landenberg, PA. > > Thanks > > Bill Degnan > > >

1 0