- vcf-midatlantic - lists.vcfed.org

OT: Modern Dell PCs for sale from Princeton University
by Jeffrey Brace 24 Mar '23

24 Mar '23

https://princeton.ams.incircuit.com/eams/f?p=1077:1502:::::P1502_ID,P1502_L… ========================================= Jeff Brace VCF National Board Member Chairman & Vice President Vintage Computer Festival East Showrunner Vintage Computer Federation is a 501c3 charity https://vcfed.org/ <http://www.vcfed.org/> jeffrey(a)vcfed.org

1 0

Re: [vcf-midatlantic] OT: need help with 2011 MacBook
by Dave Shevett 23 Mar '23

23 Mar '23

Don has it. Macs have a 'reinstall' bootup option that let you install MacOS over the internet. See https://elluminetpress.com/2020/03/reinstall-macos/ On Thu, Mar 23, 2023 at 3:51 PM Don Barber via vcf-midatlantic < vcf-midatlantic(a)lists.vcfed.org> wrote: > You tried Shift-Option-Command-R during startup? There should be a rom > built in to reinstall on that model. > > Don > > On 3/23/23 15:12, Bob Shuster via vcf-midatlantic wrote: > > I’m not sure where else to turn, so hoping one of you folks can maybe > help. I have an Apple MacBook Pro "Core i7" 2.8 13" Late 2011 with a new > blank HDD. This apparently shipped with MacOS 10.7.2 (Lion) but can run up > to 10.13 (High Sierra I believe.) Modern MacOS makes it impossible for me > to create a bootable flash drive or DVD for some reason and I only have > install disks that go up to MacOS 10.5. Long story short - I need a > bootable 10.7.2 DVD or USB drive (up to 10.13 but I’d prefer to restore it > to original OS), or original install/recovery disks for this machine, or > definitive instructions on how to create one here on a modern Mac. I used > to be able to do this easily, but now Disk Utility chokes on the process. > Thoughts? _ Bob Shuster > > > -- Dave Shevett shevett(a)pobox.com

2 1

OT: need help with 2011 MacBook
by Bob Shuster 23 Mar '23

23 Mar '23

I’m not sure where else to turn, so hoping one of you folks can maybe help. I have an Apple MacBook Pro "Core i7" 2.8 13" Late 2011 with a new blank HDD. This apparently shipped with MacOS 10.7.2 (Lion) but can run up to 10.13 (High Sierra I believe.) Modern MacOS makes it impossible for me to create a bootable flash drive or DVD for some reason and I only have install disks that go up to MacOS 10.5. Long story short - I need a bootable 10.7.2 DVD or USB drive (up to 10.13 but I’d prefer to restore it to original OS), or original install/recovery disks for this machine, or definitive instructions on how to create one here on a modern Mac. I used to be able to do this easily, but now Disk Utility chokes on the process. Thoughts? _ Bob Shuster

3 2

chat GPT admits error - NRI 832 Predated and outsold the Kenbak 1
by Bill Degnan 23 Mar '23

23 Mar '23

Yes, that is correct. The NRI 832 computer was introduced in 1972, which was after the Kenbak-1 was introduced in 1971. However, the NRI 832 may have sold more units than the Kenbak-1, even though both computers had limited commercial success. The NRI 832 was marketed to hobbyists and electronics enthusiasts, while the Kenbak-1 was marketed more towards businesses and scientific institutions. social(a)kennettclassic.com But you just said that the first NRI 832 was advertised before the Kenbak 1 Yes, that is correct. I apologize for any confusion my previous responses may have caused. According to some sources, the NRI 832 computer was advertised in the September 1971 issue of Scientific American, which predates the introduction of the Kenbak-1 in 1971. Therefore, the NRI 832 computer was introduced and advertised before the Kenbak-1. Furthermore, some sources suggest that the NRI 832 computer may have sold more units than the Kenbak-1, even though both computers had limited commercial success. The NRI 832 was marketed to hobbyists and electronics enthusiasts, while the Kenbak-1 was marketed more towards businesses and scientific institutions. I apologize for any confusion my previous responses may have caused, and I hope this clears up any confusion.

5 7

Re: [vcf-midatlantic] Bob Metcalfe wins Turning Award
by Christian Liendo 23 Mar '23

23 Mar '23

Ok you got me. I kant spel wel On Wed, Mar 22, 2023 at 7:59 PM Brian Schenkenberger <vaxman(a)tmesis.com> wrote: > > On Mar 22, 2023, at 12:03, Christian Liendo via vcf-midatlantic <vcf-midatlantic(a)lists.vcfed.org> wrote: > > Turing Award Won by Co-Inventor of Ethernet Technology > > In the 1970s, Bob Metcalfe helped develop the primary technology that > lets you send email or connect with a printer over an office network. > > > The rather long link below is because I am giving away this article. > > > > > > https://www.nytimes.com/2023/03/22/technology/turing-award-bob-metcalfe-eth… > > > I’ll bet Alan is turning in his grave with this thread’s subject. > > — VAXman

1 0

Bob Metcalfe wins Turning Award
by Christian Liendo 22 Mar '23

22 Mar '23

Turing Award Won by Co-Inventor of Ethernet Technology In the 1970s, Bob Metcalfe helped develop the primary technology that lets you send email or connect with a printer over an office network. The rather long link below is because I am giving away this article. https://www.nytimes.com/2023/03/22/technology/turing-award-bob-metcalfe-eth…

1 0

Paging Jon Chapman
by Bill Degnan 22 Mar '23

22 Mar '23

Jon, I have been trying to reach you for some time now, I must not have your correct contact info. please contact me, thanks. Sorry about the public notice Bill Degnan

1 0

VCF's presence at NJ Maker's Day @ InfoAge March 25 & 26, 2023
by Jeffrey Brace 21 Mar '23

21 Mar '23

Doug, Jeff Jonas, Bart Hirst, Wil Lindsey and I will be doing an exhibit representing VCF this coming weekend at InfoAge March 25 & 26, 2023 from 12PM to 4PM. For simplicity we are doing multiple Commodore 64s running: Paint program Music editor BASIC programming The event is free to the public as part of a statewide cooperative event by museums. There will be other InfoAge museums doing their own "Maker" type activities including the following InfoAge museums: Military Tech Museum Electronic Warfare InfoAge Space Exploration Center Cold War Fallout Shelter Computer Deconstruction Laboratory WWI & WWII Shipwreck museum Garden State Central Railroad NJ Antique Radio Club InfoAge's web page on the event: https://www.infoage.org/makers-day-2023/ NJ Maker's Day website: https://njmakersday.org/ There will be special presentations on Sunday. I believe in CDL. If you have kids, then it is a great chance for them to try out STEAM type activities. Here is a flyer: https://drive.google.com/file/d/1LsO3j3THB8ILSOziR7LTt92YqhOeT7mS/view?usp=… ========================================= Jeff Brace VCF National Board Member Chairman & Vice President Vintage Computer Festival East Showrunner Vintage Computer Federation is a 501c3 charity https://vcfed.org/ <http://www.vcfed.org/> jeffrey(a)vcfed.org

1 0

My eye spies something blue , reprint from CDL list
by Neil Cherry 20 Mar '23

20 Mar '23

This is a reposting of part of a message from the CDL list. Thought a few folks over here might be interested in the Hako. A visitor name Alison (sp?) dropped by and needed some help with desoldering a RP2040 board from a board. She soldered it backwards. While showing off our tools I noticed that the blue Hako FR-802 had a handle and nozzle on it. Throwing caution to the wind (pun intended) I started up the Hako and began to use the hot air nozzle on the board. I do need to find the manual and read it as it works really well but my inexperience with it became evident quickly. The header pin plastic parts melted, the board became unsoldered but so did every surface mount chips on the little stand off board. I think I saved all the parts. I many attempt to solder the parts back on but I'd call this board a loss. On the plus side we did get the board and the header pins all removed. I really do want to thank Martin for the Hako, the stand and the vises. All three items were put to use today to mostly good effect. 😄 We'll need to come with procedures to use the Hako. PS: Resoldering the RP2040 is probably going to have zero chance of being successful. It's a QFH-56 part and I have no hope of seeing where the chip is in relation to the pads. :-) -- Linux Home Automation Neil Cherry kd2zrq(a)linuxha.com http://www.linuxha.com/ Main site http://linuxha.blogspot.com/ My HA Blog Author of: Linux Smart Homes For Dummies KD2ZRQ

1 0

Trenton Computer Festival
by Dean Notarnicola 19 Mar '23

19 Mar '23

Drew and I set up representation for VCF at this years TCF, the first live TCF event since Covid. Smaller attendance then usual, but the agenda was full. Many VCF regulars stopped by to chat. Neil Cherry, who would normally be a speaker, couldn’t make it this year, unfortunately. We set up an Atari 8-bit, Apple //e and a Tandy Model 4D all running various software, and all using modern solid-state storage solutions. This was for the sake of simplicity as well as to evangelize the concept of bridging vintage computers to the present. I was going to have a 64C (to have the Trinity) but the PS died :-( The younger attendees loved playing Ballblazer on the Atari and Robot Wars on the Apple. They asked a ton of questions about the FujiNet and the other solid state storage devices in the machines, creating lots of dialog. Almost 100 flyers advertising VCFe were taken, hopefully attracting some extra visitors. Regards, Dean

4 3